late model wheels on an 86 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

The--Tank · 12-31-2010, 05:46 PM

Will these 16" wheels fit on a 86 4x4? I found a good deal on some 90's model alum 6 lug wheels with new nittos that I would love to have, mainly for the tires but would run the wheels if they would work. I know i would have to modify the front caps for the hubs but is there anything else i'm missing?

ortega · 12-31-2010, 08:05 PM

i think they should fit if they are the same bolt pattern. i have some newer style rims on my truck, but my truck is 5 lug

TeXaS 86 C10 · 12-31-2010, 08:52 PM

if its the same lug pattern they should match up, but you will have to get new lug nuts

463 · 12-31-2010, 09:14 PM

http://www.roadkillcustoms.com/hot-r...ALL+MODELS+4X4

Pop's C-10 · 12-31-2010, 11:38 PM

yes

MTCK · 01-01-2011, 04:58 AM

Measure the center holes to ensure that they will fit over your hubs before you buy. I know that web page says they will fit, but I recall the newer trucks having a smaller center hole than our square bodies. Let us know if they fit.

bmchevy1979 · 01-01-2011, 11:58 AM

Quote:

Originally Posted by MTCK

Measure the center holes to ensure that they will fit over your hubs before you buy. I know that web page says they will fit, but I recall the newer trucks having a smaller center hole than our square bodies. Let us know if they fit.

that's what I thought and for the front you will have to open it through the wheel for the hub or does the center cap come off

The--Tank · 01-03-2011, 11:11 AM

Thanks for all the imput. I will check the center hub size. that is what I was most worried about.

sailed2japan · 01-03-2011, 11:21 AM

I'm pretty sure the offset is also different and the newer wheels have an extra inch of back spacing, I'm not 100% on this though.

The--Tank · 01-03-2011, 11:24 AM

even if they are they should tuck in those big finders.

spudz · 01-03-2011, 12:24 PM

I have tryed this on a 4x4. The offset is a little off so they are tucked too far in and the fronts will not go on over the hub.

The--Tank · 01-03-2011, 12:51 PM

So your saying the wheel won't fit up to the hub because of the offset correct. That is a problem.

jkade · 01-03-2011, 02:52 PM

The center hub hole is too small.. you would have to machine it out to make it work.

The--Tank · 01-03-2011, 02:54 PM

Thanks that's what I was needing to know

spudz · 01-03-2011, 03:08 PM

no I was saying the front hub will not fit threw the hole in the rim AND the offset is off. but can be corrected with spacers. I dont know what you would do about the hub fitting the hole tho.

crazyforsummer · 01-04-2011, 12:01 PM

yes those wheels will fit on on an 80s and 70s trucks with a 6 bolt wheel pattern on the axels i have seen those era of trucks with the same wheels on them in calgary alberta when i use to live there

12-31-2010, 05:46 PM	#1
The--Tank Registered User Join Date: May 2010 Location: Oklahoma Posts: 17	late model wheels on an 86 Will these 16" wheels fit on a 86 4x4? I found a good deal on some 90's model alum 6 lug wheels with new nittos that I would love to have, mainly for the tires but would run the wheels if they would work. I know i would have to modify the front caps for the hubs but is there anything else i'm missing? Attached Images __________________ 1986 Chevy 1/2 ton 4x4 350 Auto Shortbed Fleetside

12-31-2010, 08:05 PM	#2
ortega Registered User Join Date: Aug 2007 Location: sun valley Posts: 98	Re: late model wheels on an 86 i think they should fit if they are the same bolt pattern. i have some newer style rims on my truck, but my truck is 5 lug

12-31-2010, 08:52 PM	#3
TeXaS 86 C10 Registered User Join Date: Jun 2010 Location: Houston TX Posts: 40	Re: late model wheels on an 86 if its the same lug pattern they should match up, but you will have to get new lug nuts __________________ 1986 LWB C-10 305/th400 Daily Driver and beer runner

12-31-2010, 09:14 PM	#4
463 Registered User Join Date: Nov 2007 Location: Sask Canada Posts: 1,666	Re: late model wheels on an 86 http://www.roadkillcustoms.com/hot-r...ALL+MODELS+4X4 __________________ Trueman

12-31-2010, 11:38 PM	#5
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: late model wheels on an 86 yes

01-01-2011, 04:58 AM	#6
MTCK Registered User Join Date: Dec 2009 Location: Fairbanks, AK Posts: 1,830	Re: late model wheels on an 86 Measure the center holes to ensure that they will fit over your hubs before you buy. I know that web page says they will fit, but I recall the newer trucks having a smaller center hole than our square bodies. Let us know if they fit. __________________ -Marcus 1991 V3500 L29 454 4L80E NP205 D60/14 Bolt 4.56's 1984 K30 292 TH400 NP205 D60/14 Bolt 4.56's flat bed 7'6" Meyer Plow 2022 Silverado 3500 L8T Project Daily Driver Project Heavy Hauler Project Plow Truck

01-03-2011, 11:11 AM	#8
The--Tank Registered User Join Date: May 2010 Location: Oklahoma Posts: 17	Re: late model wheels on an 86 Thanks for all the imput. I will check the center hub size. that is what I was most worried about. __________________ 1986 Chevy 1/2 ton 4x4 350 Auto Shortbed Fleetside

01-03-2011, 11:21 AM	#9
sailed2japan Jonny Join Date: Apr 2008 Location: Outside the Box, Austin,TX Posts: 741	Re: late model wheels on an 86 I'm pretty sure the offset is also different and the newer wheels have an extra inch of back spacing, I'm not 100% on this though. __________________ 1966 C30, Cummins, stacks, and a flat bed in progress... "Honor.....simply put, A veteran - whether active duty, retired, national guard or reserve is someone who, at one time in his life, wrote a blank check made payable to 'The United States of America', for an amount of 'up to and including his life.' That is Honor, and there are way too many people in this country who no longer understand it." -AEC Hundley USNR

01-03-2011, 11:24 AM	#10
The--Tank Registered User Join Date: May 2010 Location: Oklahoma Posts: 17	Re: late model wheels on an 86 even if they are they should tuck in those big finders. __________________ 1986 Chevy 1/2 ton 4x4 350 Auto Shortbed Fleetside

01-03-2011, 12:24 PM	#11
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: late model wheels on an 86 I have tryed this on a 4x4. The offset is a little off so they are tucked too far in and the fronts will not go on over the hub. __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

01-03-2011, 12:51 PM	#12
The--Tank Registered User Join Date: May 2010 Location: Oklahoma Posts: 17	Re: late model wheels on an 86 So your saying the wheel won't fit up to the hub because of the offset correct. That is a problem. __________________ 1986 Chevy 1/2 ton 4x4 350 Auto Shortbed Fleetside

01-03-2011, 02:52 PM	#13
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,519	Re: late model wheels on an 86 The center hub hole is too small.. you would have to machine it out to make it work.

01-03-2011, 02:54 PM	#14
The--Tank Registered User Join Date: May 2010 Location: Oklahoma Posts: 17	Re: late model wheels on an 86 Thanks that's what I was needing to know __________________ 1986 Chevy 1/2 ton 4x4 350 Auto Shortbed Fleetside

01-03-2011, 03:08 PM	#15
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: late model wheels on an 86 no I was saying the front hub will not fit threw the hole in the rim AND the offset is off. but can be corrected with spacers. I dont know what you would do about the hub fitting the hole tho. __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

01-04-2011, 12:01 PM	#16
crazyforsummer Registered User Join Date: Jan 2010 Location: pincher creek alberta Posts: 21	Re: late model wheels on an 86 yes those wheels will fit on on an 80s and 70s trucks with a 6 bolt wheel pattern on the axels i have seen those era of trucks with the same wheels on them in calgary alberta when i use to live there



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.