ID Complete heater set up for sale,restored - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**zeusflash** · 01-03-2011, 12:01 AM

I have for sale a complete heater set up that was removed from my frame off restored 72 3/4 ton 4x4 Suburban. This unit was removed to make room for factory A/C. Everything has been cleaned and painted right down to the hardware. The inner sheet metal pieces do have some scratches from removal and storage. The outer case is one of the cleanest originals I have ever seen. Control is very nice with only minor pitting in the chrome. The control has the strong arm lever conversion and a new switch. Wiring harness is very nice but the plug has been melted around the power socket,it still functioned correctly. The defrost duct to the right vent is damaged but usable and the left duct is brand new. The non A/C glove box is included if you want it. The firewall insulation is also included and is also new. The unit will be further disassembled to make shipping easier unless you want it the way it is shown in the photos. As stated this is a restored unit that was in a restored truck. More pictures available upon request. $125 obo plus shipping

**FL71C10** · 01-03-2011, 12:18 AM

Any idea on cost to ship to 32803?

**zeusflash** · 01-03-2011, 12:30 AM

Will get an estimate tomorrow. Not sure of box size or weight. Hopefully wont be too expensive,not real heavy.

**zeusflash** · 01-04-2011, 01:36 AM

Looks like 64.40 shipped UPS ground. Not heavy but box ended up oversized even with heater disassembled.

72blazer_mud_bogger · 01-05-2011, 02:07 AM

shipping to 22180 if not sold yet

**zeusflash** · 01-06-2011, 12:53 AM

Looks like 64.40 to 22180

**zeusflash** · 01-07-2011, 12:26 AM

Ttt

72blazer_mud_bogger · 01-07-2011, 06:23 PM

gonna pass but great deal for someone

**FL71C10** · 01-07-2011, 06:50 PM

Would you do $125 shipped to 32803?

**jimer1964** · 01-08-2011, 01:00 AM

getting in line shipped to 19320 if it gets to me thanks

**zeusflash** · 01-08-2011, 07:31 PM

Shipping FL71C10 and jimer1964 will be 64.40. Will sell for $165 shipped.

**FL71C10** · 01-08-2011, 09:38 PM

I'd like to take it but want to confirm the issue with the burned Plug. Exactly what is burned, and does it still work ok? How did it get burned?
Posted via Mobile Device

**jimer1964** · 01-08-2011, 10:44 PM

i will take heater parts if fl71c10 passes

**zeusflash** · 01-09-2011, 11:16 PM

The burned plug is a common thing on these trucks. The plastic plug itself is melted around the power wire. This is the pyramid shapped plug that goes on the fan switch. My guess is that the wire gets hot when the resistor for the blower motor goes bad. This heater assembly worked perfectly when remover. New pluge are available in the aftermarket. I know that the switch is new and I think I also replaced the resistor.

**jimer1964** · 01-12-2011, 12:49 PM

still interested what is the out come? fl71c10 are still needing heat in fl.?

**FL71C10** · 01-12-2011, 12:58 PM

Heck yeah we need heat here! It dropped precipitiously and it's now 44 degrees. We've got the National Guard coming in to help out!

Yes, I am buying it and we are making final arrangements.

**jimer1964** · 01-12-2011, 05:07 PM

no problem good luck with national guard!

01-03-2011, 12:01 AM	#1
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Complete heater set up for sale,restored I have for sale a complete heater set up that was removed from my frame off restored 72 3/4 ton 4x4 Suburban. This unit was removed to make room for factory A/C. Everything has been cleaned and painted right down to the hardware. The inner sheet metal pieces do have some scratches from removal and storage. The outer case is one of the cleanest originals I have ever seen. Control is very nice with only minor pitting in the chrome. The control has the strong arm lever conversion and a new switch. Wiring harness is very nice but the plug has been melted around the power socket,it still functioned correctly. The defrost duct to the right vent is damaged but usable and the left duct is brand new. The non A/C glove box is included if you want it. The firewall insulation is also included and is also new. The unit will be further disassembled to make shipping easier unless you want it the way it is shown in the photos. As stated this is a restored unit that was in a restored truck. More pictures available upon request. $125 obo plus shipping Attached Images __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

01-03-2011, 12:18 AM	#2
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,514	Re: Complete heater set up for sale,restored Any idea on cost to ship to 32803? __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

01-03-2011, 12:30 AM	#3
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Re: Complete heater set up for sale,restored Will get an estimate tomorrow. Not sure of box size or weight. Hopefully wont be too expensive,not real heavy. __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

01-04-2011, 01:36 AM	#4
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Re: Complete heater set up for sale,restored Looks like 64.40 shipped UPS ground. Not heavy but box ended up oversized even with heater disassembled. __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

01-05-2011, 02:07 AM	#5
72blazer_mud_bogger Registered User Join Date: Mar 2008 Location: St Louis, MO Posts: 533	Re: Complete heater set up for sale,restored shipping to 22180 if not sold yet

01-06-2011, 12:53 AM	#6
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Re: Complete heater set up for sale,restored Looks like 64.40 to 22180 __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

01-07-2011, 12:26 AM	#7
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Re: Complete heater set up for sale,restored Ttt __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

01-07-2011, 06:23 PM	#8
72blazer_mud_bogger Registered User Join Date: Mar 2008 Location: St Louis, MO Posts: 533	Re: Complete heater set up for sale,restored gonna pass but great deal for someone

01-07-2011, 06:50 PM	#9
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,514	Re: Complete heater set up for sale,restored Would you do $125 shipped to 32803? __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

01-08-2011, 01:00 AM	#10
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,683	Re: Complete heater set up for sale,restored getting in line shipped to 19320 if it gets to me thanks

01-08-2011, 07:31 PM	#11
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Re: Complete heater set up for sale,restored Shipping FL71C10 and jimer1964 will be 64.40. Will sell for $165 shipped. __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

01-08-2011, 09:38 PM	#12
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,514	Re: Complete heater set up for sale,restored I'd like to take it but want to confirm the issue with the burned Plug. Exactly what is burned, and does it still work ok? How did it get burned? Posted via Mobile Device __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

01-08-2011, 10:44 PM	#13
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,683	Re: Complete heater set up for sale,restored i will take heater parts if fl71c10 passes

01-09-2011, 11:16 PM	#14
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Re: Complete heater set up for sale,restored The burned plug is a common thing on these trucks. The plastic plug itself is melted around the power wire. This is the pyramid shapped plug that goes on the fan switch. My guess is that the wire gets hot when the resistor for the blower motor goes bad. This heater assembly worked perfectly when remover. New pluge are available in the aftermarket. I know that the switch is new and I think I also replaced the resistor. __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

01-12-2011, 12:49 PM	#15
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,683	Re: Complete heater set up for sale,restored still interested what is the out come? fl71c10 are still needing heat in fl.?



Register or Log In To remove these advertisements.

01-12-2011, 12:58 PM	#16
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,514	Re: Complete heater set up for sale,restored Heck yeah we need heat here! It dropped precipitiously and it's now 44 degrees. We've got the National Guard coming in to help out! Yes, I am buying it and we are making final arrangements. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

01-12-2011, 05:07 PM	#17
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,683	Re: Complete heater set up for sale,restored no problem good luck with national guard!

Register or Log In To remove these advertisements.