Need Help finding the truth - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Longhorn Man · 07-09-2003, 06:52 PM

Quote:

deadly sins:

1. Slamming
2. Chopping
3. Shaving
4. 17 inch or larger wheels
5. Seats from wrong years
6. One-piece door glass
7. Smoothed firewalls
8. Anything XXL is contemplating

And the #1 sin, dash cutting!

At least he didn't say non Chevy engines into chevy truck...I was starting to sweat this list.

The mirrors may well not be a ford set up, but a dead ringe. I have seen some that looked EXACTLY like the ones on my old Power Ranger. ('89 POS Ranger XLT)
Regardless of what you do or do not have there...it is a sweet truck with some very nice features on it.

mooneyes · 07-09-2003, 08:32 PM

.....awsome deal on the truck...mirrors could also be toyota...my 4 runner has the same mirrors which yes are excactly like ford...lol...

drink2mny · 07-10-2003, 11:23 AM

If I can do this right
Here are som Pictures

drink2mny · 07-10-2003, 11:25 AM

again

drink2mny · 07-10-2003, 11:28 AM

Again

drink2mny · 07-10-2003, 11:31 AM

1 more time??

drink2mny · 07-10-2003, 11:32 AM

I am definatley going to get a different bumper

**CPNE** · 07-10-2003, 11:50 AM

Couple other inconsistencies.

1. The door panels should have woodgrain on htem as well. Those look like Custom deluxe panels.

2. All tilts installed in trucks are black. I know you stated it was a converted van tilt, but it would be more correct if PO had left it black.

I know somebody back here that would love to have that rear bumper!

Southpa · 07-10-2003, 12:46 PM

When I pulled a van tilt from a mid 70's GMC Rally 6 there was no steering shaft. The column went at a steep downward angle and hooked right up to the rag joint. I used my own steering shaft and shortened it. The stock column has about 4" showing on the sliding (collapsible) part of the steering shaft. A van tilt in one of these trucks will show about 1 1/2".

fatfords · 07-10-2003, 12:50 PM

Alright, I'll be straight with ya, since none of these other guys will!
You got SCREWED!!

But since I'm feeling extremely charitable today, go ahead and ship it to Texas and I will refund your purchase price, even with the mirrors, tilt, bracket and woodgrain problems.

Anyway, nice find. I hope you can sleep at night knowing what you did to that previous owner.

Good Luck!

drink2mny · 07-10-2003, 04:03 PM

Quote:

I hope you can sleep at night knowing what you did to that previous owner.

Thanks fatfords..
that was friggin funny..

Hey CPNE I'll think of you when i come across a new rear bumper.I visit NH atleast once a year..Plus thanks for the info about everything..I figure if I come across things that are more original for it, I'll get them. But as for now I gots me a looker..
I realize with what you guys have said.. I hit a little jackpot..

This has made me feel alot better about it..I usally just deal with off road rigs and parts..

I'm learning as I go

Later

71-longbed · 07-10-2003, 04:43 PM

great truck man ..... dig the color

72chevyLWB · 07-10-2003, 06:59 PM

Whoops, I accidentally did 6 of those things not to do. AND I LOVE IT.

Sweet truck by the way.

weasel29gm · 07-10-2003, 07:38 PM

Wow, thats a good solid ride for the money!!!! Don't feel guilty for buyin' it. And Jeff loved the '' Church '' bit!!!!! AMEN!!!! LOL!!!

Yellow Cheyenne · 07-11-2003, 01:42 AM

The trim in front and behind the tool box should also have screws in it.

07-09-2003, 08:32 PM	#27
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	.....awsome deal on the truck...mirrors could also be toyota...my 4 runner has the same mirrors which yes are excactly like ford...lol... __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)

07-10-2003, 11:23 AM	#28
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	I want the truth I need the truth If I can do this right Here are som Pictures __________________ Support The Board

07-10-2003, 11:25 AM	#29
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	More Pics again __________________ Support The Board

07-10-2003, 11:28 AM	#30
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	I assure you we are open-Clerks Again __________________ Support The Board

07-10-2003, 11:31 AM	#31
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	I gots more 1 more time?? __________________ Support The Board

07-10-2003, 11:32 AM	#32
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	This bumper is going to change I am definatley going to get a different bumper __________________ Support The Board

07-10-2003, 11:50 AM	#33
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Couple other inconsistencies. 1. The door panels should have woodgrain on htem as well. Those look like Custom deluxe panels. 2. All tilts installed in trucks are black. I know you stated it was a converted van tilt, but it would be more correct if PO had left it black. I know somebody back here that would love to have that rear bumper! __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

07-10-2003, 12:46 PM	#34
Southpa Registered User Join Date: May 2000 Location: Victoria, BC, Canada Posts: 2,410	When I pulled a van tilt from a mid 70's GMC Rally 6 there was no steering shaft. The column went at a steep downward angle and hooked right up to the rag joint. I used my own steering shaft and shortened it. The stock column has about 4" showing on the sliding (collapsible) part of the steering shaft. A van tilt in one of these trucks will show about 1 1/2". __________________ 1970 GMC 1500 Custom Original 350/TH350 Victoria, BC, Canada You can wish in one hand and crap in the other. See which one gets filled first.

07-10-2003, 12:50 PM	#35
fatfords Registered User Join Date: Sep 2002 Location: DFW, TX Posts: 350	Alright, I'll be straight with ya, since none of these other guys will! You got SCREWED!! But since I'm feeling extremely charitable today, go ahead and ship it to Texas and I will refund your purchase price, even with the mirrors, tilt, bracket and woodgrain problems. Anyway, nice find. I hope you can sleep at night knowing what you did to that previous owner. Good Luck! __________________ '56 F-100 (w/all GM stuff) Lookin' for another parts chaser! '05 GMC crew cab

07-10-2003, 04:43 PM	#37
71-longbed Its Magically Delicious Join Date: Jan 2003 Location: oregon Posts: 2,398	great truck man ..... dig the color __________________ 71 C10 LWB 350sbc -TH350 12 bolt 3.42 Posi Of all my favorite things to do, The utmost is to have a brew. My love grows for my foamy friend, with each thirst-quenching elbow bend. Beer so frosty, smooth, and cold it's paradise pure liquid gold. Yes beer means many things to me that's all for now cus I gotta pee.

07-10-2003, 06:59 PM	#38
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	Whoops, I accidentally did 6 of those things not to do. AND I LOVE IT. Sweet truck by the way. __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.

07-10-2003, 07:38 PM	#39
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,091	Wow, thats a good solid ride for the money!!!! Don't feel guilty for buyin' it. And Jeff loved the '' Church '' bit!!!!! AMEN!!!! LOL!!! __________________ 69 C-10, OWNED 35YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

07-11-2003, 01:42 AM	#40
Yellow Cheyenne Registered User Join Date: Jun 2001 Location: Eastern Kansas Posts: 488	The trim in front and behind the tool box should also have screws in it. __________________ '72 Cheyenne. AC, PS, PB, Rear slider window, tilt. Light yellow (grapefruit yellow according to new sales literature from '72) '56 Chevy short step V-8 (My dad bought it new!!) '70 Olds 442 convertible '70 Olds Rallye 350



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.