Gmc Paul's Vs. Lmc Truck - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dmurphy68 · 07-11-2003, 11:33 PM

Quote:

Originally posted by Class of 69
Nice, helpfull guy's, but I'll warn you.....don't go in his parts trailer!!!!! You WILL spend more than you went for!!! Candy store for motor heads!!! OOOHHH, I GOTTA have one of those, and one of these...etc. etc.

I have to agree went with $205 got in that trailer and left with 5 bucks hopeing I had enought gas to get home lol
Darren

Carl71 · 07-11-2003, 11:33 PM

Great person to deal with, very good parts..

flyin99 · 07-11-2003, 11:57 PM

Absolutely GMC Paul all the way!!!!!!!!!!!!! Great place to get your parts!!!!!!!

ts71281 · 07-14-2003, 09:43 AM

Well it sounds like I'm going to be buying my Parts from GMC Paul's!

If my truck comes out looking half as good as a lot of them I see in here, I'll be happy. Now, do I get a discount since I'm a member of the board?

Hey! Never hurts to try right??? As far as the driving down there goes, the reason I wanted to do that is for the fact I worked in a distribution center for years and I know how Brown (UPS) likes to play "package javelin" with all packages that come through their distribution centers. All the parts I'm going to order should ship fairly well but I'm concerned about the bumpers and rear wheel tubs for the truck box. I don't want my bumpers dented or scratched or the fender tubs banged around. How well are the bumpers wrapped when they come? Do they come with their own box or are they wrapped with lots of bubble wrap and packaging tape? Les, I'm hoping to call you by the end of the week with a final parts list and hopefully you could come up with a grand total for me and we can take it from there? Now I just have to get my body-guy in gear!

I'm hoping I can have my truck done in a month. I'll post pics for you guys before/after when it's all done. Now I just have to pick out my rims. I'm thinking of going with the american racing AR 767's (looking for a high-gloss steel ralleye). I would buy some factory 6 bolt ralleye's if people didn't ask so much for them. I can buy the AR 767's for $45 a piece at Discount Tire Co. and they're brand new. Who knows what you get when people sell you used wheels

. Anyways guys keep up the great work on this site and have a great day.

Joe Hirdler

*Randy70C-10* · 07-14-2003, 10:06 AM

I always support the "little guy". The are much more personable to deal with.

1970blazin · 07-14-2003, 10:42 AM

Wish I knew about GMC Pauls, but I went with struff from the Truck and Car shop. About 1200.00 worth of an order - shipping was only 30.00 and all the stuff came and looks great. I haven't put it on my truck yet- probably next week. I'll let everyone know what I think. I just thought they were cheaper and I saw the guy at a swap meet and his stuff is quality.
Ken

71Chev · 07-14-2003, 01:35 PM

ts71281
We try to ship as much as possible with FedEx for the same reasons you gave. Bumpers do ship in their own boxes. It is very, very rare that a bumper gets dented. Everything is fully insured no matter how it ships though.

We would be glad to have you come down to see us if you want a road trip.

PanelDeland · 07-14-2003, 06:06 PM

I do have to admit getting one thing from LMC that works well.It is almost always right and does a great job of helping me get the right stuff.It's their catalog.It is almost as good as my factory assembly manual.But I wouldn't buy parts from them the vendors on the BB here not only sell parts they use what they sell.

palallin · 07-14-2003, 11:48 PM

I have absolutely NOTHING bad to say about GMC Paul's, but I have to chime in on behalf of LMC: I've never had a problem with their parts, and they ship quickly and without hassle. YMMV, of course, but, while I wouldn't necessarily recommend them over GMC Paul's, I can't knock LMC.

bpmcgee · 07-15-2003, 12:08 AM

I hear that Paul and Les both called in sick yesterday. They read this thread and developed swollen egos!

Just kidding guys. I'll be calling you with an order Tuesday.

Brian

07-14-2003, 10:42 AM	#31
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	truckandcarshop Wish I knew about GMC Pauls, but I went with struff from the Truck and Car shop. About 1200.00 worth of an order - shipping was only 30.00 and all the stuff came and looks great. I haven't put it on my truck yet- probably next week. I'll let everyone know what I think. I just thought they were cheaper and I saw the guy at a swap meet and his stuff is quality. Ken __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale

07-14-2003, 01:35 PM	#32
71Chev Senior Member Join Date: Dec 2000 Location: Indiana Posts: 3,074	ts71281 We try to ship as much as possible with FedEx for the same reasons you gave. Bumpers do ship in their own boxes. It is very, very rare that a bumper gets dented. Everything is fully insured no matter how it ships though. We would be glad to have you come down to see us if you want a road trip. __________________ 71 Chevy CST Long Fleet 350/350/3.07 leaf rear.

07-14-2003, 06:06 PM	#33
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	I do have to admit getting one thing from LMC that works well.It is almost always right and does a great job of helping me get the right stuff.It's their catalog.It is almost as good as my factory assembly manual.But I wouldn't buy parts from them the vendors on the BB here not only sell parts they use what they sell. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

07-14-2003, 11:48 PM	#34
palallin Registered User Join Date: Jul 2002 Location: St. James, MO Posts: 1,238	A defense of LMC. . . . I have absolutely NOTHING bad to say about GMC Paul's, but I have to chime in on behalf of LMC: I've never had a problem with their parts, and they ship quickly and without hassle. YMMV, of course, but, while I wouldn't necessarily recommend them over GMC Paul's, I can't knock LMC. __________________ '69 Longstep K-10: 327/SM465/T-221/Closed Knuckle Dana44/12-bolt.

07-11-2003, 11:33 PM	#27
Carl71 Registered User Join Date: Jun 2003 Location: Indiana Posts: 242	Great person to deal with, very good parts..

07-11-2003, 11:57 PM	#28
flyin99 creator of kong Join Date: Mar 2001 Location: Kentucky Posts: 538	Absolutely GMC Paul all the way!!!!!!!!!!!!! Great place to get your parts!!!!!!!

07-14-2003, 09:43 AM	#29
ts71281 Registered User Join Date: Apr 2003 Location: Maple Grove, MN Posts: 497	Well it sounds like I'm going to be buying my Parts from GMC Paul's! If my truck comes out looking half as good as a lot of them I see in here, I'll be happy. Now, do I get a discount since I'm a member of the board? Hey! Never hurts to try right??? As far as the driving down there goes, the reason I wanted to do that is for the fact I worked in a distribution center for years and I know how Brown (UPS) likes to play "package javelin" with all packages that come through their distribution centers. All the parts I'm going to order should ship fairly well but I'm concerned about the bumpers and rear wheel tubs for the truck box. I don't want my bumpers dented or scratched or the fender tubs banged around. How well are the bumpers wrapped when they come? Do they come with their own box or are they wrapped with lots of bubble wrap and packaging tape? Les, I'm hoping to call you by the end of the week with a final parts list and hopefully you could come up with a grand total for me and we can take it from there? Now I just have to get my body-guy in gear! I'm hoping I can have my truck done in a month. I'll post pics for you guys before/after when it's all done. Now I just have to pick out my rims. I'm thinking of going with the american racing AR 767's (looking for a high-gloss steel ralleye). I would buy some factory 6 bolt ralleye's if people didn't ask so much for them. I can buy the AR 767's for $45 a piece at Discount Tire Co. and they're brand new. Who knows what you get when people sell you used wheels . Anyways guys keep up the great work on this site and have a great day. Joe Hirdler

07-14-2003, 10:06 AM	#30
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	I always support the "little guy". The are much more personable to deal with.

07-15-2003, 12:08 AM	#35
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	I hear that Paul and Les both called in sick yesterday. They read this thread and developed swollen egos! Just kidding guys. I'll be calling you with an order Tuesday. Brian



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.