Harwood hood installed Pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RICKSRAT · 03-07-2011, 05:40 PM

Well finally got the Harwood hood painted and installed. Hood is a 3" and fit was alot better fit and less work to get painted than 2 different previous fiberglass hoods I've had. Underside is finished as well.

ripdog28 · 03-07-2011, 05:46 PM

That looks good.

BossHogg69 · 03-07-2011, 06:17 PM

Harwood stuff is awesome, and yours looks GREAT! I had one on my '92 C1500 xcab and the fit and finish of their products is top notch.

**regan wilson** · 03-07-2011, 06:58 PM

That looks good man . They built the original mold of that hood from one of my high school buddies , dads truck . They test fitted it on mine and actually gave me one . Mine fit on all four corners but had a really big gap along the fenders so I traded it to a guy to fix my old hood . Anyhow it looks real good on your truck .

BossHogg69 · 03-07-2011, 07:09 PM

Any idea on weight savings for this piece vs a stock steel hood?

rattleon · 03-07-2011, 07:40 PM

Hood looks great, I just wish they sold a 4"+ version. Did you have to work it over much prior to paint?

68 C-10 KID · 03-09-2011, 12:19 AM

So sad for me they only make it for the 69 up.

turp mcspray · 03-12-2011, 09:53 PM

Does it fit as nice as it appears to in the pics?

RICKSRAT · 03-15-2011, 04:02 PM

Thanks guys . Looking forward to Car show in Galveston in a couple of weeks and then back to the track to see how it runs since I made a few changes to motor and had freshened up. Also went from a NOS pro fogger to a new 2 stage Pro flow nitrous system and new Dana60 with more gear since last trip to the track.Hope to go some low 9's this year.

Bosshog: Hood weighs 40# compared to the 68# Goodmark 2" cowl. Talked to Harwood and they said they will put Truck on their Website when I send them a picture

Turp: Hood fits real good along fenders and cowl. Front to grill looks ok but
fit is more due to grill fitting issue to passenger side aftermarket fender.

Wasted Income · 03-21-2011, 12:32 PM

Man that looks great! I want one.

RICKSRAT · 03-28-2011, 10:28 PM

Well took Truck to the first car show in about 5 years and got 2nd in Modified class. Now just a couple of finishing details to take to track and see how it runs.
Need opinions on how truck sits now. I think it has to much of a rake and front needs to come up some.Will be ordering new front springs and not sure if I should raise front or not. Whats your opinions?

BossHogg69 · 03-28-2011, 11:30 PM

My opinion is that your truck is bada$$!

If it were me, I would lower the back a touch before I raised the front, but depending on your rear suspension setup, that might be out of the question.
Posted via Mobile Device

**Captainfab** · 03-28-2011, 11:55 PM

I like it just the way it sits......

BIG KRIS · 03-30-2011, 02:12 AM

Leave it like it is and kick ass on the track and at the shows.

ripdog28 · 03-30-2011, 08:00 AM

Drop the rear 1 in. I love when those fat tires are tucked. I have a rake about the same as yours. Ill be dropping the rear and i cant roll a tennis ball under the front.

BIG KRIS · 03-30-2011, 08:10 AM

Any pics of yours?
Posted via Mobile Device

BIG KRIS · 03-30-2011, 09:11 AM

Quote:

Originally Posted by RICKSRAT

Well took Truck to the first car show in about 5 years and got 2nd in Modified class. Now just a couple of finishing details to take to track and see how it runs.
Need opinions on how truck sits now. I think it has to much of a rake and front needs to come up some.Will be ordering new front springs and not sure if I should raise front or not. Whats your opinions?

What size wheels and tires are you running.
Posted via Mobile Device

RICKSRAT · 03-31-2011, 07:27 AM

Kris 15 x 5 w/28 x 4.5 and 15 x 14 w/31 x 14 .
Rear is about as low as I can go and this is with a c notch. So I am looking at raising the front some to take some of the rake out. Current front springs are a 1" drop and are 12" long. I have'nt found a spring less than 16" for racing so it will raise the front.Hopefully not to much that I have to raise the rear to level back off.

*stich626* · 03-31-2011, 09:36 AM

looks great...
for those that can't get one. (year not made)
goodmark makes a 2.5" and a 5" steel cowl scoop
summit racing sell it, and would any vendor that stocks goodmark near you..
I just bought the 5" for my monty SS..
goodmark makes a hood for my car but the hood is 580.oo plus shipping(truck freight=not cheap)
scoop was 149.00 shipped ups
hope that helps

1Bad62Pro/Street · 03-31-2011, 11:21 AM

Very nice.
Whole a lot better made than mine!
Nothing like in the photos on the website!
http://www.up22.com/chevytruck.htm#1...y Trucks & GMC

03-07-2011, 05:46 PM	#2
ripdog28 Registered User Join Date: Apr 2008 Location: Imperial Beach, CA Posts: 1,040	Re: Harwood hood installed Pics That looks good. __________________ 69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles.3.5/6in drop. My Build.

03-07-2011, 06:17 PM	#3
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Harwood hood installed Pics Harwood stuff is awesome, and yours looks GREAT! I had one on my '92 C1500 xcab and the fit and finish of their products is top notch. __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

03-07-2011, 06:58 PM	#4
regan wilson Senior Member Join Date: Mar 2008 Location: tyler texas Posts: 1,536	Re: Harwood hood installed Pics That looks good man . They built the original mold of that hood from one of my high school buddies , dads truck . They test fitted it on mine and actually gave me one . Mine fit on all four corners but had a really big gap along the fenders so I traded it to a guy to fix my old hood . Anyhow it looks real good on your truck . __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

03-07-2011, 07:09 PM	#5
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Harwood hood installed Pics Any idea on weight savings for this piece vs a stock steel hood? __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

03-07-2011, 07:40 PM	#6
rattleon Registered User Join Date: Oct 2009 Location: Idaho Posts: 44	Re: Harwood hood installed Pics Hood looks great, I just wish they sold a 4"+ version. Did you have to work it over much prior to paint? __________________ 1970 c-10 short/step box morphing into street/strip 1967 RS/SS convertible Camaro 1932 Henry Ford steel 5 window coupe highboy hotrod 1931 full fendered model A sedan AV8 traditional hotrod. 1934 Ford 5 window coupe and a (pile-of-parts) 1929 Model A coupe, plus our "normal" people vehicles.

03-07-2011, 05:40 PM	#1
RICKSRAT Registered User Join Date: Apr 2000 Location: LAKE JACKSON TEXAS Posts: 343	Harwood hood installed Pics Well finally got the Harwood hood painted and installed. Hood is a 3" and fit was alot better fit and less work to get painted than 2 different previous fiberglass hoods I've had. Underside is finished as well. Attached Images __________________ '72 SWB 3,600# Indigo Blue , Sunset Racing Pump Gas 582" 1,002hp / 833tq ,Transking 400 W/ Transbrake, Moser Dana 60 w/4.30 Old Motor: 60'. 1.43 1/8 6.58@104.64 1/4. 10.42@127.10 Nitrous: 60'. 1.28 1/8. 6.15@ 112.02 1/4. 9.75@ 136.32 Last edited by RICKSRAT; 03-07-2011 at 07:42 PM. Reason: add pics

03-09-2011, 12:19 AM	#7
68 C-10 KID Mean Green Join Date: Sep 2007 Location: Portland, OR Posts: 522	Re: Harwood hood installed Pics So sad for me they only make it for the 69 up. __________________ 427 SBC 683HP & 590ftlbsTRQ @ fly wheel. 60'-1.38 1/4-10.43 MPH-124.6 New ET current 4/2019 AKA MEAN GREEN.

03-12-2011, 09:53 PM	#8
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: Harwood hood installed Pics Does it fit as nice as it appears to in the pics? __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

03-15-2011, 04:02 PM	#9
RICKSRAT Registered User Join Date: Apr 2000 Location: LAKE JACKSON TEXAS Posts: 343	Re: Harwood hood installed Pics Thanks guys . Looking forward to Car show in Galveston in a couple of weeks and then back to the track to see how it runs since I made a few changes to motor and had freshened up. Also went from a NOS pro fogger to a new 2 stage Pro flow nitrous system and new Dana60 with more gear since last trip to the track.Hope to go some low 9's this year. Bosshog: Hood weighs 40# compared to the 68# Goodmark 2" cowl. Talked to Harwood and they said they will put Truck on their Website when I send them a picture Turp: Hood fits real good along fenders and cowl. Front to grill looks ok but fit is more due to grill fitting issue to passenger side aftermarket fender. __________________ '72 SWB 3,600# Indigo Blue , Sunset Racing Pump Gas 582" 1,002hp / 833tq ,Transking 400 W/ Transbrake, Moser Dana 60 w/4.30 Old Motor: 60'. 1.43 1/8 6.58@104.64 1/4. 10.42@127.10 Nitrous: 60'. 1.28 1/8. 6.15@ 112.02 1/4. 9.75@ 136.32 Last edited by RICKSRAT; 03-15-2011 at 04:10 PM.

03-21-2011, 12:32 PM	#10
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	Re: Harwood hood installed Pics Man that looks great! I want one. __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2016 Ford Explorer Sport - Twin Turbskis 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*

03-28-2011, 10:28 PM	#11
RICKSRAT Registered User Join Date: Apr 2000 Location: LAKE JACKSON TEXAS Posts: 343	Re: Harwood hood installed Pics Well took Truck to the first car show in about 5 years and got 2nd in Modified class. Now just a couple of finishing details to take to track and see how it runs. Need opinions on how truck sits now. I think it has to much of a rake and front needs to come up some.Will be ordering new front springs and not sure if I should raise front or not. Whats your opinions? Attached Images __________________ '72 SWB 3,600# Indigo Blue , Sunset Racing Pump Gas 582" 1,002hp / 833tq ,Transking 400 W/ Transbrake, Moser Dana 60 w/4.30 Old Motor: 60'. 1.43 1/8 6.58@104.64 1/4. 10.42@127.10 Nitrous: 60'. 1.28 1/8. 6.15@ 112.02 1/4. 9.75@ 136.32

03-28-2011, 11:30 PM	#12
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Harwood hood installed Pics My opinion is that your truck is bada$$! If it were me, I would lower the back a touch before I raised the front, but depending on your rear suspension setup, that might be out of the question. Posted via Mobile Device __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

03-28-2011, 11:55 PM	#13
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Harwood hood installed Pics I like it just the way it sits...... __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

03-30-2011, 02:12 AM	#14
BIG KRIS Registered User Join Date: May 2009 Location: romeoville,il Posts: 509	Re: Harwood hood installed Pics Leave it like it is and kick ass on the track and at the shows. __________________ Flowershop Hip Hop & Street Rods Dropmember 83 Custom Deluxe Almond on Almond 85 Silverado White on Red/Now Chevy LeMans Blue Rendering in Truckin magazine vol 36 no. 11,2010

03-30-2011, 08:00 AM	#15
ripdog28 Registered User Join Date: Apr 2008 Location: Imperial Beach, CA Posts: 1,040	Re: Harwood hood installed Pics Drop the rear 1 in. I love when those fat tires are tucked. I have a rake about the same as yours. Ill be dropping the rear and i cant roll a tennis ball under the front. __________________ 69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles.3.5/6in drop. My Build.



Register or Log In To remove these advertisements.

03-30-2011, 08:10 AM	#16
BIG KRIS Registered User Join Date: May 2009 Location: romeoville,il Posts: 509	Re: Harwood hood installed Pics Any pics of yours? Posted via Mobile Device __________________ Flowershop Hip Hop & Street Rods Dropmember 83 Custom Deluxe Almond on Almond 85 Silverado White on Red/Now Chevy LeMans Blue Rendering in Truckin magazine vol 36 no. 11,2010

03-31-2011, 07:27 AM	#18
RICKSRAT Registered User Join Date: Apr 2000 Location: LAKE JACKSON TEXAS Posts: 343	Re: Harwood hood installed Pics Kris 15 x 5 w/28 x 4.5 and 15 x 14 w/31 x 14 . Rear is about as low as I can go and this is with a c notch. So I am looking at raising the front some to take some of the rake out. Current front springs are a 1" drop and are 12" long. I have'nt found a spring less than 16" for racing so it will raise the front.Hopefully not to much that I have to raise the rear to level back off. __________________ '72 SWB 3,600# Indigo Blue , Sunset Racing Pump Gas 582" 1,002hp / 833tq ,Transking 400 W/ Transbrake, Moser Dana 60 w/4.30 Old Motor: 60'. 1.43 1/8 6.58@104.64 1/4. 10.42@127.10 Nitrous: 60'. 1.28 1/8. 6.15@ 112.02 1/4. 9.75@ 136.32

03-31-2011, 09:36 AM	#19
stich626 Account Suspended Join Date: Sep 2010 Location: hingham ma Posts: 1,721	Re: Harwood hood installed Pics looks great... for those that can't get one. (year not made) goodmark makes a 2.5" and a 5" steel cowl scoop summit racing sell it, and would any vendor that stocks goodmark near you.. I just bought the 5" for my monty SS.. goodmark makes a hood for my car but the hood is 580.oo plus shipping(truck freight=not cheap) scoop was 149.00 shipped ups hope that helps

03-31-2011, 11:21 AM	#20
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Harwood hood installed Pics Very nice. Whole a lot better made than mine! Nothing like in the photos on the website! http://www.up22.com/chevytruck.htm#1...y Trucks & GMC __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

Register or Log In To remove these advertisements.