|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-16-2011, 07:28 PM
|
#1 |
|
Registered User
Join Date: Feb 2011
Location: Sterling Heights Michigan
Posts: 11
|
choke connection help needed
I have a electric choke on my 350 chevymotor but have no wires to connect to the 2 terminals 1 aflat spade the other a female my question where do I get the wires from its a edelbrock carb. thank you.
|
|
|
|
04-16-2011, 07:40 PM
|
#2 |
|
1969 Custom 30 wrecker
Join Date: Sep 2001
Location: Pottsville, Pa
Posts: 2,611
|
Re: choke connection help needed
All you need is a short piece of wire to go to ground for the one terminal and the other terminal goes to battery power (when key is on only)
Solderless terminals are available at any auto parts store.
__________________
Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10 |
|
|
|
|
04-16-2011, 07:45 PM
|
#3 |
|
Registered User
Join Date: Aug 2009
Location: La Quinta, CA
Posts: 72
|
Re: choke connection help needed
You can use a wire off the wiper motor. Use a test light and find the one that has power when the key is turned on (yellow is a good if you see it on there).
__________________
Larry 1972 Chevy C20 Custom Camper 1968 Chevy Camaro RS 1980 GMC K5 Sierra Classic |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
