ride height problem

[tallic68]

First problem I see is the centerlink/tie-rods are installed wrong. Let me see if I can find a reference pic. Check this thread out for some decent pics & info....
http://67-72chevytrucks.com/vboard/s...d.php?t=400205
Today 09:11 PM

Dude you are the man!!!!

Thanks you very much. Thank you thank you thank you!!!
No speed wabbels, turns on a dime in my culdesac, no clearance issues.


I still need to deal with the ride hight, but at least it is driveable.

Again dose HD springs change the ride hight?

Thanks you very much again,
Mike

[gringoloco]

Originally Posted by tallic68

...I still need to deal with the ride height...

Have you tried re-installing the stock springs?

[SCOTI]

Originally Posted by gringoloco

Have you tried re-installing the stock springs?

x2. And get the alignment re-checked. The tie-rods are in a different location so the settings will be different. Your alignment guy might do it for free since he didn't notice things were not installed properly when doing the alignment. It's worth checking into...

[tallic68]

Unfortnetly the front coil springs were the only part that got tossed some how. Or i would have reinstalled them by now. But I called the guy with the Donnor truck. When I got the parts he said to come get the parts quick because he was going to get rid of the trucks he had. But he still has them and i'm going out today to get the spring off the truck that I got the spindles off of.

I'll check with the alignment shop. Thanks
Posted via Mobile Device

Thanks a lot again,
Mike
Posted via Mobile Device