The Fuse is Lit... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RocketKing · 10-20-2011, 02:10 PM

Is this what you are looking for Mike?

mcbassin · 10-20-2011, 02:33 PM

Quote:

Originally Posted by RocketKing

Is this what you are looking for Mike?

Yep, that's what I was looking for. I have already ran mine down the passenger side. I'm not sure how to route it just yet? thanks for the pics.

RocketKing · 10-20-2011, 09:58 PM

Mcbassin and I were talking about different connectors on our harnesses. I thought I would post some pics of what connectors I had and where they went. Most people probably know where the plugs go but when you get a harness that is not on the engine it can make you scratch your head just where everything goes. Hope this help someone.

This plug goes to the connector that is right above the starter. (Crankshaft Sensor)

MAF sensor, does not go on the engine but on the air intake by the filter

10-20-2011, 02:10 PM	#1
RocketKing Registered User Join Date: Dec 2008 Location: Berryville, AR Posts: 792	Re: The Fuse is Lit... Is this what you are looking for Mike? __________________ Rex

10-20-2011, 09:58 PM	#3
RocketKing Registered User Join Date: Dec 2008 Location: Berryville, AR Posts: 792	Re: The Fuse is Lit... Mcbassin and I were talking about different connectors on our harnesses. I thought I would post some pics of what connectors I had and where they went. Most people probably know where the plugs go but when you get a harness that is not on the engine it can make you scratch your head just where everything goes. Hope this help someone. This plug goes to the connector that is right above the starter. (Crankshaft Sensor) MAF sensor, does not go on the engine but on the air intake by the filter __________________ Rex



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.