NJ WTB: Oil filler tube manifold style - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 01-01-2012, 12:24 AM

Looking for an oil filler tube that was used in the older sbc engines located in the front of the intake manifold. Please LMK condition and price including shipping to 08753.

Thanks
Scott

c1069 · 01-01-2012, 03:37 AM

Quote:

Originally Posted by ScottH

Looking for an oil filler tube that was used in the older sbc engines located in the front of the intake manifold. Please LMK condition and price including shipping to 08753.

Thanks
Scott

Just the filler tube or the whole intake manifold?
Posted via Mobile Device

**ScottH** · 01-01-2012, 10:02 AM

Just looking for the filler tube.

**tll74** · 01-01-2012, 01:26 PM

How about an original chrome one off a early Corvette? I also have the common type.

**ScottH** · 01-01-2012, 04:23 PM

Pics and price would be great.

thanks

**ScottH** · 01-02-2012, 05:44 PM

ttt

**tll74** · 01-02-2012, 07:43 PM

Here's a couple pics. It was removed from a 66 Corvette 327 Holley intake. 20.00 shipped. I looked for my early reg type and couldn't find them. I only had a few minutes to look. I'll be able to look more tomorrow. Thanks, Tom

**ScottH** · 01-02-2012, 07:49 PM

Tom, thanks for the pics. Would prefer a plain stock one, the type that uses the push in breather top.

**ScottH** · 01-03-2012, 02:56 PM

ttt

**ScottH** · 01-04-2012, 12:12 AM

ttt

**tll74** · 01-05-2012, 02:11 AM

Sorry Scott I can't seam to find the tubes I have. ttt for ya

**ScottH** · 01-05-2012, 10:05 AM

Thanks for checkin Tom

**Classic Heartbeat** · 01-05-2012, 02:03 PM

I have one with the support and another without the support that I can't seem to get the 4bbl manifold to reliece! $50.00 for either one. WES

**ScottH** · 01-05-2012, 06:14 PM

Thanks Wes but hoping to find one on the inexpensive side.

lil hoodlum · 01-05-2012, 07:41 PM

Are you looking for something like these in the photos? I am planning on going to a salvage yard nearby and can ask how much they want.

Do you know how to remove one of these?

Keith

**zicc1835** · 01-05-2012, 09:55 PM

dont want to hyjack Scotts post but if you can get me that manuel choke 2 barrel in the bottom left or at least a price for it i would be interested ship in flat rate if Scott wants one of those oil fill tubes ill pay the ship and drop it to him or whatever works thanks
Jess

**ScottH** · 01-05-2012, 11:45 PM

Keith, looking for one like in the last pic. A breather cap just pushes into the tube. Looking for one without the tab for the carb return spring. Sorry have no idea how to remove one.

Jess, thanks for the assist.

**tll74** · 01-06-2012, 05:14 PM

Only way to remove one without damage is to use a socket or something just under the intake hole size and drive it out.

**daddymoo2** · 01-06-2012, 09:28 PM

Scotth: i think this is the part you are looking for. Push in type oil fill tube. Nice and clean inside and out. No dents or dings. Look at pics. Asking 20.00 and 5.00 shipping. Thanks Don

lil hoodlum · 01-07-2012, 01:28 PM

I apologize ScottH and Zicc1835, I did not make it out to the salvage yard Friday. They are closed on the week ends, so I won't be able to make it out untile Monday at the earliest.

Zicc1835, can you tell me which photo you are referring to? All are of 1967-1972 C10s except for the last one. The last one is out of an impala mid 60s. I used to have a two barrel Rochester with manual choke like yours. I now have a 4 barrell edelbrock. I had purchased several of the two barrel Rochesters from local salvage yards and rebuilt them. I ended up purchasing a reman Rochester from AutoZone if I am not mistaken. I purchased all of the carbs because I was trying to correct a problem of back firing. It turns out it wasn't the carb but the timing chain had stretched too far. I don't have the carbs anymore.

Keith

lil hoodlum · 01-13-2012, 05:51 PM

ScottH, I finally made it out to the salvage yard yesterday. The guy wants $95 for the oil filler tube including the intake manifold. He says he has never had any luck removing an oil filler tube so he will sell both the oil filler tube and the intake manifold as a complete unit.

Sorry, it doesn't sound like that good of a deal.

Zicc1835, the salvage yard guy wants $75.00 for the carbeurator. He also said it most likely will need rebuilding.

If either of you are interested I will forward the contact information. I apolagize for taking so long to get out to the salvage yard.

Keith

01-01-2012, 12:24 AM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	WTB: Oil filler tube manifold style Looking for an oil filler tube that was used in the older sbc engines located in the front of the intake manifold. Please LMK condition and price including shipping to 08753. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-01-2012, 10:02 AM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: WTB: Oil filler tube manifold style Just looking for the filler tube. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-01-2012, 01:26 PM	#4
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: WTB: Oil filler tube manifold style How about an original chrome one off a early Corvette? I also have the common type. __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-01-2012, 04:23 PM	#5
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: WTB: Oil filler tube manifold style Pics and price would be great. thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-02-2012, 05:44 PM	#6
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: WTB: Oil filler tube manifold style ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-02-2012, 07:43 PM	#7
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: WTB: Oil filler tube manifold style Here's a couple pics. It was removed from a 66 Corvette 327 Holley intake. 20.00 shipped. I looked for my early reg type and couldn't find them. I only had a few minutes to look. I'll be able to look more tomorrow. Thanks, Tom Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-02-2012, 07:49 PM	#8
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: WTB: Oil filler tube manifold style Tom, thanks for the pics. Would prefer a plain stock one, the type that uses the push in breather top. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-03-2012, 02:56 PM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: WTB: Oil filler tube manifold style ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-04-2012, 12:12 AM	#10
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: WTB: Oil filler tube manifold style ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-05-2012, 02:11 AM	#11
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: WTB: Oil filler tube manifold style Sorry Scott I can't seam to find the tubes I have. ttt for ya __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-05-2012, 10:05 AM	#12
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: WTB: Oil filler tube manifold style Thanks for checkin Tom __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-05-2012, 02:03 PM	#13
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Re: WTB: Oil filler tube manifold style I have one with the support and another without the support that I can't seem to get the 4bbl manifold to reliece! $50.00 for either one. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

01-05-2012, 06:14 PM	#14
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: WTB: Oil filler tube manifold style Thanks Wes but hoping to find one on the inexpensive side. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-05-2012, 07:41 PM	#15
lil hoodlum Registered User Join Date: Oct 2009 Location: Denton, Texas Posts: 1,703	Re: WTB: Oil filler tube manifold style Are you looking for something like these in the photos? I am planning on going to a salvage yard nearby and can ask how much they want. Do you know how to remove one of these? Keith Attached Images

01-05-2012, 09:55 PM	#16
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,147	Re: WTB: Oil filler tube manifold style dont want to hyjack Scotts post but if you can get me that manuel choke 2 barrel in the bottom left or at least a price for it i would be interested ship in flat rate if Scott wants one of those oil fill tubes ill pay the ship and drop it to him or whatever works thanks Jess __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557



Register or Log In To remove these advertisements.

01-05-2012, 11:45 PM	#17
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: WTB: Oil filler tube manifold style Keith, looking for one like in the last pic. A breather cap just pushes into the tube. Looking for one without the tab for the carb return spring. Sorry have no idea how to remove one. Jess, thanks for the assist. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-06-2012, 05:14 PM	#18
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: WTB: Oil filler tube manifold style Only way to remove one without damage is to use a socket or something just under the intake hole size and drive it out. __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-06-2012, 09:28 PM	#19
daddymoo2 Senior Member Join Date: Mar 2010 Location: union,ky Posts: 1,552	Re: WTB: Oil filler tube manifold style Scotth: i think this is the part you are looking for. Push in type oil fill tube. Nice and clean inside and out. No dents or dings. Look at pics. Asking 20.00 and 5.00 shipping. Thanks Don Attached Images

01-07-2012, 01:28 PM	#20
lil hoodlum Registered User Join Date: Oct 2009 Location: Denton, Texas Posts: 1,703	Re: WTB: Oil filler tube manifold style I apologize ScottH and Zicc1835, I did not make it out to the salvage yard Friday. They are closed on the week ends, so I won't be able to make it out untile Monday at the earliest. Zicc1835, can you tell me which photo you are referring to? All are of 1967-1972 C10s except for the last one. The last one is out of an impala mid 60s. I used to have a two barrel Rochester with manual choke like yours. I now have a 4 barrell edelbrock. I had purchased several of the two barrel Rochesters from local salvage yards and rebuilt them. I ended up purchasing a reman Rochester from AutoZone if I am not mistaken. I purchased all of the carbs because I was trying to correct a problem of back firing. It turns out it wasn't the carb but the timing chain had stretched too far. I don't have the carbs anymore. Keith

01-13-2012, 05:51 PM	#21
lil hoodlum Registered User Join Date: Oct 2009 Location: Denton, Texas Posts: 1,703	Re: WTB: Oil filler tube manifold style ScottH, I finally made it out to the salvage yard yesterday. The guy wants $95 for the oil filler tube including the intake manifold. He says he has never had any luck removing an oil filler tube so he will sell both the oil filler tube and the intake manifold as a complete unit. Sorry, it doesn't sound like that good of a deal. Zicc1835, the salvage yard guy wants $75.00 for the carbeurator. He also said it most likely will need rebuilding. If either of you are interested I will forward the contact information. I apolagize for taking so long to get out to the salvage yard. Keith

Register or Log In To remove these advertisements.