How many 2 wheel drive blazers do we have? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**KevsClassics** · 02-06-2012, 01:23 AM

Quote:

Originally Posted by babyblueoval

Kevin,

I don't believe I've seen your avatar pic before. Are you holding out on new pics for us?

Here you go.
From Last years CPP Open house

babyblueoval · 02-06-2012, 08:47 AM

Quote:

Originally Posted by KevsClassics

Here you go.
From Last years CPP Open house

Very nice. Are those new seats in there? No more highbacks? I like it.

Topfuelflat · 02-06-2012, 03:02 PM

Quote:

Originally Posted by KevsClassics

Here you go.
From Last years CPP Open house

Wow what an impressive ride, you should be very proud. Any chance of seeing pics of the interior.

greens69 · 02-06-2012, 04:55 PM

Quote:

Originally Posted by KevsClassics

Here you go.
From Last years CPP Open house

I love looking at pictures of your blazer!! very nice!!

**KevsClassics** · 02-07-2012, 01:55 AM

Quote:

Originally Posted by babyblueoval

Very nice. Are those new seats in there? No more highbacks? I like it.

Thanks, Same seats. I just had them cut down. I never liked the high backs.

Quote:

Originally Posted by Topfuelflat

Wow what an impressive ride, you should be very proud. Any chance of seeing pics of the interior.

Thanks, These are the only pics I have of int. I will take better shots soon

Quote:

Originally Posted by greens69

I love looking at pictures of your blazer!! very nice!!

DITTO

denny5625 · 02-07-2012, 11:31 AM

Quote:

Originally Posted by KevsClassics

Thanks, Same seats. I just had them cut down. I never liked the high backs.

Thanks, These are the only pics I have of int. I will take better shots soon

DITTO

Very nice looking ride you have there. I hope mine looks half that good some day.

PHAT TONY · 02-08-2012, 10:48 PM

Quote:

Originally Posted by KevsClassics

Thanks, Same seats. I just had them cut down. I never liked the high backs.

Thanks, These are the only pics I have of int. I will take better shots soon

DITTO

I love the look of a rear roll pan on a Blazer bum, but I can't bring myself to cut the rear frame to do it!

jeffg1010 · 02-08-2012, 11:02 PM

Quote:

Originally Posted by KevsClassics

Thanks, Same seats. I just had them cut down. I never liked the high backs.

Thanks, These are the only pics I have of int. I will take better shots soon

DITTO

You don't by any chance have a hitch tucked up under that license do you?

I'd like to have a hidden hitch on mine, but I havent seen anyone do it with a rollpan.

RustyBucket · 02-09-2012, 12:17 AM

Thanks AGAIN Topfuel, sure wish I could achieve this without having to graft another end onto the filler neck... maybe modify one of the caps from the link you provided.
Regarding the roll pan rear, I like 'em both ways. The P.O. installed the roll pan. He'd cut the frame clean with a sawzall and gave me the pieces when I bought it. Guess I could tack 'em back on and buy a bumper...

jeffg1010 · 02-09-2012, 10:11 AM

Quote:

Originally Posted by RustyBucket

Guess I could tack 'em back on and buy a bumper...

Nah... keep it that way. I love that Blazer! I like it without the roadster pods too.

RustyBucket · 02-09-2012, 03:15 PM

I've been mad at 'ol "JIMMY FOUR EYES" since my air ratchet smacked me in the mouth while I was putting the new bumper on. My lip healed up... can't stay mad too long. I had a better looking grille and headlight trim. His face scrubbed up pretty good. I think he's a "wannabe" 4wd.--- stock height susp., roll bar, and a spare tire carrier.

PHAT TONY · 02-09-2012, 10:08 PM

Quote:

Originally Posted by RustyBucket

Thanks AGAIN Topfuel, sure wish I could achieve this without having to graft another end onto the filler neck... maybe modify one of the caps from the link you provided.
Regarding the roll pan rear, I like 'em both ways. The P.O. installed the roll pan. He'd cut the frame clean with a sawzall and gave me the pieces when I bought it. Guess I could tack 'em back on and buy a bumper...

Everytime I see a pic of this thing I like it a little more!!

RustyBucket · 02-10-2012, 01:43 AM

Quote:

Originally Posted by PHAT TONY

Everytime I see a pic of this thing I like it a little more!!

Thanks Tony! I'm still really pleased that I found and bought this Blazer. It seems to thrive on being run HARD. I have a wish list of improvements I'd like to make but I don't have time. I'm too busy blasting around in it enjoying it.

Topfuelflat · 02-09-2012, 12:05 AM

Quote:

Originally Posted by KevsClassics

Here you go.
From Last years CPP Open house

Everything about your blazer is top knotch. The interior is super clean. I really like how you made the glove box match the dash panel, I've never seen that before, hope you dont mind if I borrow that idea for mine.

**KevsClassics** · 02-09-2012, 12:40 AM

Quote:

Originally Posted by denny5625

Very nice looking ride you have there. I hope mine looks half that good some day.

Thank you.

Quote:

Originally Posted by PHAT TONY

I love the look of a rear roll pan on a Blazer bum, but I can't bring myself to cut the rear frame to do it!

I would prefer a bumper. But roll pan was on when I bought it.

Quote:

Originally Posted by jeffg1010

You don't by any chance have a hitch tucked up under that license do you?

I'd like to have a hidden hitch on mine, but I havent seen anyone do it with a rollpan.

It can be done. There was a hidden hitch but I took it off cause I will never tow anything

Quote:

Originally Posted by Topfuelflat

Everything about your blazer is top knotch. The interior is super clean. I really like how you made the glove box match the dash panel, I've never seen that before, hope you dont mind if I borrow that idea for mine.

Thank you very much for the compliment. Glad you like the glove box idea. I don't mind at all. That's what great about this forum we can all share different ideas with each other

JOHNORO · 02-10-2012, 01:08 AM

Quote:

Originally Posted by way2lo2

I have a 71 and 72, the 71 I think is sold and the 72 is near completion.

This is the Blazer that did it for me...
I remember thinking man someday I would love to have something that nice !

Quote:

Originally Posted by denny5625

Here's mine.

I like the roadster look on yours denny5625

Quote:

Originally Posted by KevsClassics

Here you go.
From Last years CPP Open house

And Kevin when my Blazer grows up it wants to be like yours

02-09-2012, 12:17 AM	#9
RustyBucket Registered User Join Date: Jul 2009 Location: Space Coast, Fl. Posts: 1,055	Re: How many 2 wheel drive blazers do we have? Thanks AGAIN Topfuel, sure wish I could achieve this without having to graft another end onto the filler neck... maybe modify one of the caps from the link you provided. Regarding the roll pan rear, I like 'em both ways. The P.O. installed the roll pan. He'd cut the frame clean with a sawzall and gave me the pieces when I bought it. Guess I could tack 'em back on and buy a bumper... Attached Images __________________ Dad always said, "Son, WISH IN ONE HAND, and ......." -------------------------------------- -------------------------------------- Current toy trucks: '71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C '72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these: '66 Plymouth Belvedere City of Miami cop car clone. '70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!! '67 C10 short/step side mount spare -- SOLD!! '72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!! '69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!!

02-09-2012, 03:15 PM	#11
RustyBucket Registered User Join Date: Jul 2009 Location: Space Coast, Fl. Posts: 1,055	Re: How many 2 wheel drive blazers do we have? I've been mad at 'ol "JIMMY FOUR EYES" since my air ratchet smacked me in the mouth while I was putting the new bumper on. My lip healed up... can't stay mad too long. I had a better looking grille and headlight trim. His face scrubbed up pretty good. I think he's a "wannabe" 4wd.--- stock height susp., roll bar, and a spare tire carrier. Attached Images __________________ Dad always said, "Son, WISH IN ONE HAND, and ......." -------------------------------------- -------------------------------------- Current toy trucks: '71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C '72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these: '66 Plymouth Belvedere City of Miami cop car clone. '70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!! '67 C10 short/step side mount spare -- SOLD!! '72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!! '69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.