80's Chevy van with a factory floor shift?

[fast_dev]

bob if you get this transmission im definatly interested in buying it from you, must get the bell housing and shifter also as they are specific to these transmissions, well atleast the bell housing is, but the shifter would be a plus. let me know, i'll be at napa all week 7:30-6. thanks, Devin

[V30 mongo]

Many moons ago I had a 86 G10 van. It was ordered with a 305V8 4 barrel and the 4speed, 3.42 rear with G80. What a hoot it was to pull up next to a car and chirp the tries at the light and then to get rubber at 2nd gear.Just wish i could have got 4.11's or better yet 4.56's. The trans was a new process. Looked like a regular car transmission with the shifting linkage coming out of the left side of the housing. The shift lever had to come through the floor at an angle facing forwards. The shift knob was low, right at the right of the drivers seat.

[bobs409]

Originally Posted by fast_dev

bob if you get this transmission im definatly interested in buying it from you, must get the bell housing and shifter also as they are specific to these transmissions, well atleast the bell housing is, but the shifter would be a plus. let me know, i'll be at napa all week 7:30-6. thanks, Devin

I'll have to see if I can still get it this week Devin. Not sure what it's worth, I usually post on ebay when I'm not sure and let the buyers set the price. I can't even find one on there to see what others are selling for.

You into vans now?