Smitty's 67 Build - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcbassin · 05-30-2012, 11:06 PM

Quote:

Originally Posted by CHRIS67GMC

Tech tip for the day. We weld mandrel bent sections of pipe together to build the exhaust. The 3 inch wide band clamps work great to hold it in place as you go but a good trick is to cut open a couple clamps so you can tach your sections together. It makes it alot faster and easier to do.

Brilliant idea! I'm stealing this thanks for sharing it.

VA72C10 · 05-31-2012, 12:32 AM

Looks great! Love how you angled it at the back instead of straight down

Lolyin58 · 05-31-2012, 08:38 AM

Awesome job, looks really good. With that progress each day u will be rolling in no time at all.

CHRIS67GMC · 06-01-2012, 12:28 PM

Good news the engine just needs the crank turned and new bearing.. Bad news a complete dry sump setup with a power steering drive on it costs 3k for all the parts needed.

Progress report need to mount a few more things and fab work is finished. then body work time.

Bed floor turned out great.

Name: 35.jpg
Views: 1668
Size: 34.3 KB

Master and slave clynder fit nice together.
Name: 33.jpg
Views: 1668
Size: 50.9 KB

Lokar pedals look cool in black.
Name: 31.jpg
Views: 1652
Size: 41.3 KB

**67cheby** · 06-01-2012, 12:58 PM

HOLY SMOKES...how big of a brake do you have ? bed floor is SMOOOTH !

CHRIS67GMC · 06-02-2012, 03:49 PM

More parts mounted. Oil tank and breather are from Peterson nice parts.

The AirPod made it alot quicker to install!

Name: 001 (13).jpg
Views: 1637
Size: 30.4 KB

Name: 001 (13).jpg
Views: 1637
Size: 30.4 KB

Name: 002 (11).jpg
Views: 1635
Size: 43.0 KB

Name: 003 (8).jpg
Views: 1656
Size: 45.8 KB

**67cheby** · 06-02-2012, 05:07 PM

CLEAN work !

NewType72 · 06-04-2012, 02:03 AM

wow man KILLER bed I'm lovin the dually style inner wheel wells too looks sick man!

CHRIS67GMC · 06-04-2012, 10:29 PM

Thanks for the comments guys. I thought the wider tubs would look better then raising the floor higher to clear the swaybar and shocks.

mcbassin · 06-04-2012, 11:18 PM

I love all the custom fabrication work. This truck is coming together so fast. Love the tubs.

CHRIS67GMC · 06-06-2012, 11:10 AM

Couple updates made some rock sheilds for behind the tires. I decided to keep the factory dash in this one the new dash looks to modern for this build.

I got a couple dash panels from No-Limit.

Name: 62.jpg
Views: 1563
Size: 31.5 KB

This new Holley pump has 2 pumps in one cool idea. This way you have a back up or turn them both on when racing.
Name: 61.jpg
Views: 1565
Size: 32.3 KB

**67cheby** · 06-06-2012, 11:32 AM

dang....now something else i have to build !!.....and i thought my bed was DONE !

CHRIS67GMC · 06-06-2012, 01:07 PM

67Cheby you might as well make 2 for the front also LOL they only take about a hour to make.

Name: 063.jpg
Views: 1555
Size: 32.2 KB

**67cheby** · 06-06-2012, 01:09 PM

yep..i believe i will, maybe even bead roll a cool panel into them ! nice work, it will keep the water off of my compressors and battery ! you could save me a little time and just mail me the patterns ...LOL !

CHRIS67GMC · 06-08-2012, 02:28 PM

UPS brought some goodies today. Im running a Flamming River Column with the key in it, makes for a cleaner dash plus I cant reach the key when im harnessed in. They had a cool steering wheel also.
Name: 001 (14).jpg
Views: 1515
Size: 35.7 KB

Name: 001 (14).jpg
Views: 1515
Size: 35.7 KB

I got my plates

Name: 008 (5).jpg
Views: 1524
Size: 35.8 KB

CHRIS67GMC · 06-13-2012, 10:50 AM

Some update pics.

Name: c-10 016 (2).jpg
Views: 1485
Size: 46.4 KB

Name: c-10 017.jpg
Views: 1486
Size: 43.8 KB

Name: c-10 018.jpg
Views: 1494
Size: 51.6 KB

Name: c-10 025.jpg
Views: 1492
Size: 55.6 KB

CHRIS67GMC · 06-13-2012, 10:52 AM

My proud little helper. I was teaching him to weld also he loved that!
Name: c-10 024.jpg
Views: 1496
Size: 51.6 KB

3 weeks to go till Columbus back to bare frame.
Name: c-10 026.jpg
Views: 1509
Size: 79.0 KB

Timbo1 · 06-13-2012, 11:23 AM

It's lookiing awesome< could you tell me how long of column you ordered and also where you got the steering shaft material? I just installed the No Limits rack also, and your looks very nice!! Any help would be appreciated , Thanks Tim

**67cheby** · 06-13-2012, 12:17 PM

wow...everything looks killer, bust that 3 weeks out , lets see it !

CHRIS67GMC · 06-13-2012, 10:56 PM

The column is a 30 inch its probably as short as you can be a 32 is probably better. If you need help getting one pm me im a dealer. The shaft and joints are borgenson.

Timbo1 · 06-13-2012, 11:33 PM

Quote:

Originally Posted by CHRIS67GMC

The column is a 30 inch its probably as short as you can be a 32 is probably better. If you need help getting one pm me im a dealer. The shaft and joints are borgenson.

Thanks. I will be in touch soon.
Posted via Mobile Device

mcbassin · 06-13-2012, 11:50 PM

Bunch of nice custom and high end parts here, you're moving super fast too!
Posted via Mobile Device

tac106842 · 06-14-2012, 09:30 AM

Truck is looking great Chris!

CHRIS67GMC · 06-16-2012, 07:36 AM

Bedliner on the bottom of the cab and wheel tubs complete.
Name: c-10 003 (4).jpg
Views: 1675
Size: 44.2 KB

Name: c-10 002 (5).jpg
Views: 1695
Size: 94.8 KB

Here is part of the parts pile.

Name: c-10 001 (6).jpg
Views: 1660
Size: 50.1 KB

Lolyin58 · 06-16-2012, 09:03 AM

Looks like Santa arrived at your place. Looks great can't wait to see more Chris!

05-31-2012, 12:32 AM	#102
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Smitty's 67 Build Looks great! Love how you angled it at the back instead of straight down __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-31-2012, 08:38 AM	#103
Lolyin58 Registered User Join Date: Mar 2008 Location: Calgary,Alberta,Canada Posts: 372	Re: Smitty's 67 Build Awesome job, looks really good. With that progress each day u will be rolling in no time at all.

06-01-2012, 12:28 PM	#104
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build Good news the engine just needs the crank turned and new bearing.. Bad news a complete dry sump setup with a power steering drive on it costs 3k for all the parts needed. Progress report need to mount a few more things and fab work is finished. then body work time. Bed floor turned out great. Master and slave clynder fit nice together. Lokar pedals look cool in black.

06-01-2012, 12:58 PM	#105
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Smitty's 67 Build HOLY SMOKES...how big of a brake do you have ? bed floor is SMOOOTH ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-02-2012, 03:49 PM	#106
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build More parts mounted. Oil tank and breather are from Peterson nice parts. The AirPod made it alot quicker to install!

06-02-2012, 05:07 PM	#107
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Smitty's 67 Build CLEAN work ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-04-2012, 02:03 AM	#108
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: Smitty's 67 Build wow man KILLER bed I'm lovin the dually style inner wheel wells too looks sick man! __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

06-04-2012, 10:29 PM	#109
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build Thanks for the comments guys. I thought the wider tubs would look better then raising the floor higher to clear the swaybar and shocks.

06-04-2012, 11:18 PM	#110
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Smitty's 67 Build I love all the custom fabrication work. This truck is coming together so fast. Love the tubs. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

06-06-2012, 11:10 AM	#111
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build Couple updates made some rock sheilds for behind the tires. I decided to keep the factory dash in this one the new dash looks to modern for this build. I got a couple dash panels from No-Limit. This new Holley pump has 2 pumps in one cool idea. This way you have a back up or turn them both on when racing.

06-06-2012, 11:32 AM	#112
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Smitty's 67 Build dang....now something else i have to build !!.....and i thought my bed was DONE ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-06-2012, 01:07 PM	#113
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build 67Cheby you might as well make 2 for the front also LOL they only take about a hour to make.

06-06-2012, 01:09 PM	#114
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Smitty's 67 Build yep..i believe i will, maybe even bead roll a cool panel into them ! nice work, it will keep the water off of my compressors and battery ! you could save me a little time and just mail me the patterns ...LOL ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-08-2012, 02:28 PM	#115
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build UPS brought some goodies today. Im running a Flamming River Column with the key in it, makes for a cleaner dash plus I cant reach the key when im harnessed in. They had a cool steering wheel also. I got my plates

06-13-2012, 10:50 AM	#116
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build Some update pics.



Register or Log In To remove these advertisements.

06-13-2012, 10:52 AM	#117
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build My proud little helper. I was teaching him to weld also he loved that! 3 weeks to go till Columbus back to bare frame.

06-13-2012, 11:23 AM	#118
Timbo1 Registered User Join Date: Apr 2011 Location: Gilbert Az Posts: 260	Re: Smitty's 67 Build It's lookiing awesome< could you tell me how long of column you ordered and also where you got the steering shaft material? I just installed the No Limits rack also, and your looks very nice!! Any help would be appreciated , Thanks Tim __________________ Check out my other build http://67-72chevytrucks.com/vboard/s...d.php?t=457288 http://67-72chevytrucks.com/vboard/s...d.php?t=517089

06-13-2012, 12:17 PM	#119
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Smitty's 67 Build wow...everything looks killer, bust that 3 weeks out , lets see it ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-13-2012, 10:56 PM	#120
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build The column is a 30 inch its probably as short as you can be a 32 is probably better. If you need help getting one pm me im a dealer. The shaft and joints are borgenson.

06-13-2012, 11:50 PM	#122
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Smitty's 67 Build Bunch of nice custom and high end parts here, you're moving super fast too! Posted via Mobile Device __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

06-14-2012, 09:30 AM	#123
tac106842 Registered User Join Date: Mar 2010 Location: Van Buren, ohio Posts: 69	Re: Smitty's 67 Build Truck is looking great Chris!

06-16-2012, 07:36 AM	#124
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Smitty's 67 Build Bedliner on the bottom of the cab and wheel tubs complete. Here is part of the parts pile.

06-16-2012, 09:03 AM	#125
Lolyin58 Registered User Join Date: Mar 2008 Location: Calgary,Alberta,Canada Posts: 372	Re: Smitty's 67 Build Looks like Santa arrived at your place. Looks great can't wait to see more Chris!

Register or Log In To remove these advertisements.