Full porterbuilt 66 with LY5.. Need info on changing oil pan !! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ls1nova71 · 08-20-2012, 10:52 PM

Judging from that first pic, you're going to need a 4th Gen Camaro pan, all others will hang below the crossmember a bit, unless you raise the engine.

jtp67-72 · 08-20-2012, 11:11 PM

Quote:

Originally Posted by ls1nova71

Judging from that first pic, you're going to need a 4th Gen Camaro pan, all others will hang below the crossmember a bit, unless you raise the engine.

that's what in the link above......

ls1nova71 · 08-20-2012, 11:16 PM

Guess I should have opened the link!

But anyway, that was just my opinion.

jtp67-72 · 08-20-2012, 11:37 PM

Quote:

Originally Posted by ls1nova71

Guess I should have opened the link!

But anyway, that was just my opinion.

And your right!! and with used pans bringing 150-175 bare....I think U can't beat these guys.....ls parts ain't cheap.....yet........jim

08-20-2012, 10:52 PM	#1
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: Full porterbuilt 66 with LY5.. Need info on changing oil pan !! Judging from that first pic, you're going to need a 4th Gen Camaro pan, all others will hang below the crossmember a bit, unless you raise the engine. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

08-20-2012, 11:16 PM	#3
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: Full porterbuilt 66 with LY5.. Need info on changing oil pan !! Guess I should have opened the link! But anyway, that was just my opinion. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.