longer studs? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

canadian trucker · 09-05-2012, 11:21 AM

I once had to get longer ones for the front.
Pressed out the original, walked down to Lordco......... or was it NAPA, either one.
They will measure it up and look thru their book for a longer one.
Or measure it up yourself, if you have a digital caliper and look on summit's website for a part number, then drive down to Mopac or Lordco and get some.

If I remember correctly for a 1.25" front rotor its a 0.620" knurl
But better double check

Hope it helps

09-05-2012, 11:21 AM	#2
canadian trucker A day should have 30 hours. Join Date: Jul 2005 Location: BC, Canada Posts: 248	Re: longer studs? I once had to get longer ones for the front. Pressed out the original, walked down to Lordco......... or was it NAPA, either one. They will measure it up and look thru their book for a longer one. Or measure it up yourself, if you have a digital caliper and look on summit's website for a part number, then drive down to Mopac or Lordco and get some. If I remember correctly for a 1.25" front rotor its a 0.620" knurl But better double check Hope it helps



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.