low as possible - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smashingchuck · 09-05-2012, 05:53 PM

get some drop spindles. Out back, shackles will have you cutting the bed support, but thats an option. you could also move the spring perches up on the frame, that's pretty easy if you have a shop. Finally, you could add a block if you already have a flip kit.

3r!c84 · 09-05-2012, 05:58 PM

Quote:

Originally Posted by smashingchuck

get some drop spindles. Out back, shackles will have you cutting the bed support, but thats an option. you could also move the spring perches up on the frame, that's pretty easy if you have a shop. Finally, you could add a block if you already have a flip kit.

have 3inch drop spindles already in the truck along with 1 coil cut from stock coil springs... can i do drop spings ? what size?

i my do drop shackles for the rear along with a c-notch

bigblock73 · 09-05-2012, 08:50 PM

Quote:

Originally Posted by smashingchuck

...Out back, shackles will have you cutting the bed support, but thats an option.

Trucks with the longer 56" springs will not require the bed support to be notched.

09-05-2012, 05:53 PM	#1
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: low as possible get some drop spindles. Out back, shackles will have you cutting the bed support, but thats an option. you could also move the spring perches up on the frame, that's pretty easy if you have a shop. Finally, you could add a block if you already have a flip kit. __________________ 78 Build Thread 4Runner Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.