|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-15-2012, 12:38 PM
|
#1 |
|
Registered User
Join Date: Oct 2012
Location: peterborough ontario
Posts: 8
|
hi im new and looking for some help
Hello all i'm new here and i just bought a 1975 GMC Custom Deluxe C10 1/2 ton with a 250 inline six with the three on the tree now the guy i got it from changed it to floor shifter and it now only get 1st gear and reverse now i want to know how do i get it back to the column shifter any help would be great thanks
ps yes i am going to restore the truck to original |
|
|
|
10-15-2012, 08:25 PM
|
#2 |
|
Registered User
Join Date: Sep 2012
Location: LaMoille Illinois
Posts: 119
|
Re: hi im new and looking for some help
sounds like a linkage is loose or came off the shifter???
to get it back on the column you will need the original linkages from the column to the trans, i would give you mine but mine was converted to the floor before i got it as well!! |
|
|
|
|
10-15-2012, 08:26 PM
|
#3 |
|
Registered User
Join Date: Sep 2012
Location: LaMoille Illinois
Posts: 119
|
Re: hi im new and looking for some help
got a picture of the shifter?? mine is kinda worn and may be interested in yours if its a hurst???
|
|
|
|
|
10-15-2012, 08:32 PM
|
#4 |
|
Registered User
Join Date: Oct 2012
Location: peterborough ontario
Posts: 8
|
Re: hi im new and looking for some help
no i dont have the truck home yet as im trying to figure out the linkage so i can drive it home
|
|
|
|
|
10-15-2012, 08:48 PM
|
#5 |
|
Registered User
Join Date: Sep 2012
Location: LaMoille Illinois
Posts: 119
|
Re: hi im new and looking for some help
if i remember correctly one arm is for reverse and 1st and the other is for 2nd and third??
i can get a picture of my linkages tomorrow for you if that would help?? |
|
|
|
|
10-15-2012, 08:50 PM
|
#6 |
|
Registered User
Join Date: Sep 2012
Location: LaMoille Illinois
Posts: 119
|
Re: hi im new and looking for some help
did you look to see if one was disconnected or hangin loose??
|
|
|
|
|
10-15-2012, 08:50 PM
|
#7 |
|
Registered User
Join Date: Oct 2012
Location: peterborough ontario
Posts: 8
|
Re: hi im new and looking for some help
ya then i can get my truck shifting right then i can worry about the column shifter later on thanks
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
