CA WTB Blue patina pass fender - The 1947 - Present Chevrolet & GMC Truck Message Board Network

perro13 · 02-23-2013, 11:30 PM

looking for a pass side fender or maybe both. doesn't have to be perfect, dents, rust welcomed, as long as it matches my suburban or close enough. i can buy or trade parts.

perro13 · 02-25-2013, 05:16 PM

anyone

1963c-10 · 02-25-2013, 05:31 PM

I have one that came on my 61 parts truck. Was the same color blue from the factory. I will get a picture tomorrow when I go over there. Has the usual lower rust issues. Here are some pics prior to disassembly.

perro13 · 02-25-2013, 05:34 PM

Quote:

Originally Posted by 1963c-10

I have one that came on my 61 parts truck. Was the same color blue from the factory. I will get a picture tomorrow when I go over there. Has the usual lower rust issues

Perfect, get me pics , price or trade.

1963c-10 · 02-25-2013, 05:39 PM

Id be fine w/either. Its probably only worth $75 with the work that it needs. Only a few parts im looking for....factory radio & knobs, oem custom choke & throttle cable knob... pass door and i need a decent inner fender, I believe pass side. Id have to look at home. I picked up a set, but one was no good, just dont remember which. And a hood, but that will have to wait til I have some extra cash. Let me know what you have or if cash would be easier, and id like to get some pics of the fender and look at the condition a little better for you. Ill be there at 5pm est tomorrow, so it'll be wednesday before I get back to you. Jon

perro13 · 02-25-2013, 05:45 PM

i have some of the parts listed, wait for pics

1963c-10 · 02-26-2013, 10:27 AM

Noticed the tow hooks on your suburban...I have a set...can you give me some measurements for mounting? Just need to know where to drill

perro13 · 02-26-2013, 10:42 AM

Quote:

Originally Posted by 1963c-10

Noticed the tow hooks on your suburban...I have a set...can you give me some measurements for mounting? Just need to know where to drill

get some later today

1963c-10 · 02-27-2013, 09:21 AM

Had a real bad rain storm here last night, I wasn't able to make it out there to get pics. I will be there again tomorrow and the weather looks better for tomorrow.

1963c-10 · 03-04-2013, 01:59 PM

Havingtrouble uploading from my phone to the computer...have tried several times...I wil post them as i get them loaded. Im trying to resend them. Both fenders will need rear supports. The pass fender has some blistering on the botttom front corner and some work on the lower rear. The driver side has work on lower rear

1963c-10 · 03-04-2013, 02:33 PM

Heres another

1963c-10 · 03-07-2013, 11:15 AM

Ok, finally got the last pics to load

02-23-2013, 11:30 PM	#1
perro13 Registered User Join Date: Dec 2008 Location: Stockton CA Posts: 2,364	WTB Blue patina pass fender looking for a pass side fender or maybe both. doesn't have to be perfect, dents, rust welcomed, as long as it matches my suburban or close enough. i can buy or trade parts. Last edited by perro13; 02-23-2013 at 11:43 PM.

02-25-2013, 05:16 PM	#2
perro13 Registered User Join Date: Dec 2008 Location: Stockton CA Posts: 2,364	Re: WTB Blue patina pass fender anyone

02-25-2013, 05:31 PM	#3
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: WTB Blue patina pass fender I have one that came on my 61 parts truck. Was the same color blue from the factory. I will get a picture tomorrow when I go over there. Has the usual lower rust issues. Here are some pics prior to disassembly. Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

02-25-2013, 05:39 PM	#5
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: WTB Blue patina pass fender Id be fine w/either. Its probably only worth $75 with the work that it needs. Only a few parts im looking for....factory radio & knobs, oem custom choke & throttle cable knob... pass door and i need a decent inner fender, I believe pass side. Id have to look at home. I picked up a set, but one was no good, just dont remember which. And a hood, but that will have to wait til I have some extra cash. Let me know what you have or if cash would be easier, and id like to get some pics of the fender and look at the condition a little better for you. Ill be there at 5pm est tomorrow, so it'll be wednesday before I get back to you. Jon __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

02-25-2013, 05:45 PM	#6
perro13 Registered User Join Date: Dec 2008 Location: Stockton CA Posts: 2,364	Re: WTB Blue patina pass fender i have some of the parts listed, wait for pics

02-26-2013, 10:27 AM	#7
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: WTB Blue patina pass fender Noticed the tow hooks on your suburban...I have a set...can you give me some measurements for mounting? Just need to know where to drill __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

02-27-2013, 09:21 AM	#9
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: WTB Blue patina pass fender Had a real bad rain storm here last night, I wasn't able to make it out there to get pics. I will be there again tomorrow and the weather looks better for tomorrow. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

03-04-2013, 01:59 PM	#10
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: WTB Blue patina pass fender Havingtrouble uploading from my phone to the computer...have tried several times...I wil post them as i get them loaded. Im trying to resend them. Both fenders will need rear supports. The pass fender has some blistering on the botttom front corner and some work on the lower rear. The driver side has work on lower rear Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

03-04-2013, 02:33 PM	#11
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: WTB Blue patina pass fender Heres another Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

03-07-2013, 11:15 AM	#12
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: WTB Blue patina pass fender Ok, finally got the last pics to load Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.