Where does the lower steering column seal fit? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mark B · 03-28-2013, 07:22 PM

Where does the lower column seal (in the bottom of the picture) fit in relation to the firewall pad, the firewall rubber seal, and the shaft mounting plate?

thanks
The Fixer

JimKshortstep4x4 · 03-28-2013, 07:32 PM

The seal that is on the column is the only one that you need. I believe that the seal you are asking about is for some of the larger trucks.

Jim

Mark B · 03-28-2013, 08:08 PM

Thanks Jim. Maybe I bought it needlessly.
Does anyone else have an idea?
The hole in the seal I am asking about is about a 1/4 smaller in diameter than the steering shaft. But is is the same size as the brake booster rod hole in the firewall!

thanks
The Fixer

**special-K** · 03-29-2013, 07:29 AM

There's only one location to seal,where the column exits the cab,so only the one seal.

03-28-2013, 07:22 PM	#1
Mark B Registered User Join Date: Oct 2005 Location: Ontario, Canada Posts: 145	Where does the lower steering column seal fit? Where does the lower column seal (in the bottom of the picture) fit in relation to the firewall pad, the firewall rubber seal, and the shaft mounting plate? thanks The Fixer Attached Images

03-28-2013, 07:32 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Where does the lower steering column seal fit? The seal that is on the column is the only one that you need. I believe that the seal you are asking about is for some of the larger trucks. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

03-28-2013, 08:08 PM	#3
Mark B Registered User Join Date: Oct 2005 Location: Ontario, Canada Posts: 145	Re: Where does the lower steering column seal fit? Thanks Jim. Maybe I bought it needlessly. Does anyone else have an idea? The hole in the seal I am asking about is about a 1/4 smaller in diameter than the steering shaft. But is is the same size as the brake booster rod hole in the firewall! thanks The Fixer

03-29-2013, 07:29 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Where does the lower steering column seal fit? There's only one location to seal,where the column exits the cab,so only the one seal. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.