AL dana 44 front spindel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*mrdana60* · 04-08-2013, 08:03 PM

in good cond. its the big bearing one. take 30 shipped for it

*mrdana60* · 04-08-2013, 08:04 PM

also have spindel nuts also

**special-K** · 04-09-2013, 12:09 AM

Could you give me the part# so I can see if it is what my truck has? In '72 there was a 1st and second design and mine is 1st,same as '71.

*mrdana60* · 04-09-2013, 05:59 AM

I will get part number this afternoon. I ve only known them to be big bearing and the small bearing. The small bearing ones are harder to find.

**special-K** · 04-09-2013, 07:12 AM

I'm only familiar with 71/71 K/20 hub assemblies. Of the few 1/2 tons I've had I've never had to do repairs in this area and not sure about drum axles,either. For all I know there are only two designs for all,but want to be sure. I have a parts book to check application with using part#.

Vintage Windmills · 04-09-2013, 10:29 PM

I am interested if Tim passes and the grooves aren't bad where the seal was riding. It looks like it may be grooved?

*mrdana60* · 04-09-2013, 10:41 PM

Its in good shape just dirty. Had both of them. But sold one. Couldn't find a number on it. All I know its the big bearing spindel for Dana 44 disc brake front

**special-K** · 04-10-2013, 06:35 AM

Do you know what it came off of,then? Because there was the 71-72 1st design and the 72 2nd design. I don't have one to measure to compare and don't want to keep going around with this,so I'll just take it. PM your info for a postal m.o.....Thankx

*mrdana60* · 04-27-2013, 03:37 PM

it come off a a 76 chevy 4 wheel drive. i thought it would work on 71-72. guess i ll move it to the 73-87 section.

04-08-2013, 08:03 PM	#1
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	dana 44 front spindel in good cond. its the big bearing one. take 30 shipped for it

04-08-2013, 08:04 PM	#2
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: dana 44 front spindel also have spindel nuts also

04-09-2013, 12:09 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: dana 44 front spindel Could you give me the part# so I can see if it is what my truck has? In '72 there was a 1st and second design and mine is 1st,same as '71. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-09-2013, 05:59 AM	#4
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: dana 44 front spindel I will get part number this afternoon. I ve only known them to be big bearing and the small bearing. The small bearing ones are harder to find.

04-09-2013, 07:12 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: dana 44 front spindel I'm only familiar with 71/71 K/20 hub assemblies. Of the few 1/2 tons I've had I've never had to do repairs in this area and not sure about drum axles,either. For all I know there are only two designs for all,but want to be sure. I have a parts book to check application with using part#. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-09-2013, 10:29 PM	#6
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: dana 44 front spindel I am interested if Tim passes and the grooves aren't bad where the seal was riding. It looks like it may be grooved? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

04-09-2013, 10:41 PM	#7
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: dana 44 front spindel Its in good shape just dirty. Had both of them. But sold one. Couldn't find a number on it. All I know its the big bearing spindel for Dana 44 disc brake front

04-10-2013, 06:35 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: dana 44 front spindel Do you know what it came off of,then? Because there was the 71-72 1st design and the 72 2nd design. I don't have one to measure to compare and don't want to keep going around with this,so I'll just take it. PM your info for a postal m.o.....Thankx __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-27-2013, 03:37 PM	#9
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: dana 44 front spindel it come off a a 76 chevy 4 wheel drive. i thought it would work on 71-72. guess i ll move it to the 73-87 section.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.