My dirty dingo motor mounts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 05-05-2013, 10:11 AM

Quote:

Originally Posted by 69trk

Not sure what you guys are talking about on these mounts... They are thick metal plates that slide with bolts.... There is nothing to break on these... I'm more worried about the polyurathane part of the motor mount which is not dirty dingo...

+1, the only ones that I have heard that had a quality issue were the 73-87 style.
Posted via Mobile Device

**truckdude239** · 05-05-2013, 10:35 AM

thats what i was wondering i was checking mine out when i got them even if a weld breaks the only thing welded on is the bolts to keep them from spinning since u can't get to them on the back side my looked great and worked perfect i did have to shorten my drive shaft though

1972K20 · 05-05-2013, 06:07 PM

Quote:

Originally Posted by 69trk

Not sure what you guys are talking about on these mounts... They are thick metal plates that slide with bolts.... There is nothing to break on these... I'm more worried about the polyurathane part of the motor mount which is not dirty dingo...

This thread is enough to make me question the quality of DD mounts:

http://coloradok5.com/forums/showthread.php?t=299192

There has also been discussion on here about their quality, but people still seem to buy them.

Mr. 250r · 05-05-2013, 07:55 PM

I think they need a few things at that company

1. A good welder
2. A certified welder to use the good welder
3. A REAL CWI to check the welds NOT an in-house CWI

I don't think they have any which probably led us all here. Mine were cold welded but not anything like that although my cousins had some porosity and i told him to send them back but he didn't

69trk · 05-05-2013, 08:45 PM

The only welds on mine are the bolts so they won't spin when tightening. So even if the welds break the bolt head is not going to pull thru the plate... I'm more worried about other things breaking before these.... I do agree for the money, they could of welded the bolts up better....

69trk · 05-05-2013, 08:55 PM

I see what you guys are talking about... Those are a different set of mounts from what i used..

**truckdude239** · 05-05-2013, 09:49 PM

I had a buddy that used the 73 + mount from them and he cut the welds and re welded them him self so I do agree that's why I used the slider mounts where the o my thing welded was the bolts to keep them from spinning
Posted via Mobile Device

05-05-2013, 10:35 AM	#27
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,238	Re: My dirty dingo motor mounts thats what i was wondering i was checking mine out when i got them even if a weld breaks the only thing welded on is the bolts to keep them from spinning since u can't get to them on the back side my looked great and worked perfect i did have to shorten my drive shaft though __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

05-05-2013, 07:55 PM	#29
Mr. 250r Registered User Join Date: Dec 2010 Location: freeburg, illinois Posts: 885	Re: My dirty dingo motor mounts I think they need a few things at that company 1. A good welder 2. A certified welder to use the good welder 3. A REAL CWI to check the welds NOT an in-house CWI I don't think they have any which probably led us all here. Mine were cold welded but not anything like that although my cousins had some porosity and i told him to send them back but he didn't __________________ 1987 Chevy V30 - http://67-72chevytrucks.com/vboard/s...d.php?t=573854 1988 IROC-Z Camaro - 305/T5 T-Top 1989 GMC V35 - Marbolo Express http://67-72chevytrucks.com/vboard/s...d.php?t=596850 1991 V2500 Suburban Silverado - Sold 1991 V2500 Suburban Scottsdale - Big Nasty http://67-72chevytrucks.com/vboard/s...d.php?t=497423 2001 Ram 3500 5.9 H.O NV56 EC DRW - Sold 2003 1500 Silverado 2004 Ram 3500 5.9 H.O NV56 CC DRW - Sold 2005 Silverado 2500HD 6.6/ZF6 CC LWB

05-05-2013, 08:45 PM	#30
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: My dirty dingo motor mounts The only welds on mine are the bolts so they won't spin when tightening. So even if the welds break the bolt head is not going to pull thru the plate... I'm more worried about other things breaking before these.... I do agree for the money, they could of welded the bolts up better.... __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

05-05-2013, 08:55 PM	#31
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: My dirty dingo motor mounts I see what you guys are talking about... Those are a different set of mounts from what i used.. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

05-05-2013, 09:49 PM	#32
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,238	Re: My dirty dingo motor mounts I had a buddy that used the 73 + mount from them and he cut the welds and re welded them him self so I do agree that's why I used the slider mounts where the o my thing welded was the bolts to keep them from spinning Posted via Mobile Device __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.