NJ FS: 72 350 4 bolt main bare block cheap - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 03-07-2013, 10:45 AM

will also include a double roller timing chain and gear set along with a new chrome timing cover

EVERYTHING for $200!!

**ScottH** · 03-13-2013, 09:41 AM

ttt

**gmc 2500 4x4** · 03-13-2013, 04:16 PM

do you have the main caps with the block? i would be interested in this deal. pm me your address so i can map it out from buffalo ny

**ScottH** · 03-13-2013, 04:40 PM

I'm 99% sure I have them but let me check in the morning just to be sure.

**ScottH** · 04-26-2013, 09:21 AM

still available

**ScottH** · 05-05-2013, 03:32 PM

ttt

DARIO1 · 05-05-2013, 08:53 PM

So, did you have the main caps that go with the block?

**ScottH** · 05-09-2013, 08:04 PM

Dario1, so sorry for the delay but finally had a chance to check today, and yes I have the main caps with the block.

Lee H · 05-09-2013, 08:37 PM

What bore is the block currently?
Posted via Mobile Device

Lee H · 05-09-2013, 08:53 PM

3970010 was a general casting number for 350 blocks from 1969-1979 and some 1968 327, and come in nearly every car & truck in all HP configurations. Some were high nickel, most were not. The high nickel blocks had "010" casting mark inside the timing chain cover and some had it on he side of the block.
Posted via Mobile Device

**ScottH** · 05-09-2013, 10:01 PM

Stock bore

Lee H · 05-09-2013, 10:05 PM

Quote:

Originally Posted by ScottH

Stock bore

You have mic it and its still 4.0? It's never been rebuilt or bored?
Posted via Mobile Device

72swbcamo · 05-09-2013, 10:19 PM

Hi Scott, I'm interested I'll give tu a call.

DARIO1 · 05-10-2013, 07:33 AM

"I'll take it all" and can arrange a pickup of the whole package. PM sent.

72swbcamo · 05-10-2013, 04:25 PM

Scott: Did I have any standing in this posting? Dario1 came into this thread late and only ask the question as to whether you had main caps for the block. At no time did he express any interest in purchasing until i expressed interest in this posting. I am away on vacation and was going to contact you when i got back home.
As I looked , back at the thread it seems that GMC 2500 4X4 may have showed interest in this before both of us!

**ScottH** · 05-10-2013, 11:43 PM

This is a difficult situation which I myself have been in the middle of several times.
The problem is expressing interest does not say "I intend to buy it", although it does imply one may decide to. The real difficulty I have with this thread is it is a year old & just recently members have express interest. As I have been told myself, "I will take it" is the definitive sold statement. Dario1 did post b4 u asking a question which also implies interest. However if we assume everyone that asks questions, or expresses interest, is going to buy an item, some things would never be sold. So I guess in trying to be as fair as possible, since Dario1 posted earlier and stated he would take it, I will have to give him first shot. I hope this sounds fair to all.

72swbcamo · 05-11-2013, 05:07 PM

Hi Scott: let me know if Dario1 falls through. If the package becomes available I'll take it. Sorry for getting you in the middle of this issue.
Posted via Mobile Device

**ScottH** · 05-11-2013, 05:19 PM

I definitely will, thanks for understanding.

03-07-2013, 10:45 AM	#26
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap will also include a double roller timing chain and gear set along with a new chrome timing cover EVERYTHING for $200!! __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-13-2013, 09:41 AM	#27
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-13-2013, 04:16 PM	#28
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,972	Re: FS: 72 350 4 bolt main bare block cheap do you have the main caps with the block? i would be interested in this deal. pm me your address so i can map it out from buffalo ny

03-13-2013, 04:40 PM	#29
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap I'm 99% sure I have them but let me check in the morning just to be sure. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-26-2013, 09:21 AM	#30
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap still available __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

05-05-2013, 03:32 PM	#31
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

05-05-2013, 08:53 PM	#32
DARIO1 Registered User Join Date: Nov 2011 Location: FL GA line Posts: 161	Re: FS: 72 350 4 bolt main bare block cheap So, did you have the main caps that go with the block?

05-09-2013, 08:04 PM	#33
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap Dario1, so sorry for the delay but finally had a chance to check today, and yes I have the main caps with the block. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

05-09-2013, 08:37 PM	#34
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: FS: 72 350 4 bolt main bare block cheap What bore is the block currently? Posted via Mobile Device __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

05-09-2013, 08:53 PM	#35
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: FS: 72 350 4 bolt main bare block cheap 3970010 was a general casting number for 350 blocks from 1969-1979 and some 1968 327, and come in nearly every car & truck in all HP configurations. Some were high nickel, most were not. The high nickel blocks had "010" casting mark inside the timing chain cover and some had it on he side of the block. Posted via Mobile Device __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

05-09-2013, 10:01 PM	#36
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap Stock bore __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

05-09-2013, 10:19 PM	#38
72swbcamo Active Member Join Date: Dec 2003 Location: Waterbury, CT Posts: 591	Re: FS: 72 350 4 bolt main bare block cheap Hi Scott, I'm interested I'll give tu a call.

05-10-2013, 07:33 AM	#39
DARIO1 Registered User Join Date: Nov 2011 Location: FL GA line Posts: 161	Re: FS: 72 350 4 bolt main bare block cheap "I'll take it all" and can arrange a pickup of the whole package. PM sent.

05-10-2013, 04:25 PM	#40
72swbcamo Active Member Join Date: Dec 2003 Location: Waterbury, CT Posts: 591	Re: FS: 72 350 4 bolt main bare block cheap Scott: Did I have any standing in this posting? Dario1 came into this thread late and only ask the question as to whether you had main caps for the block. At no time did he express any interest in purchasing until i expressed interest in this posting. I am away on vacation and was going to contact you when i got back home. As I looked , back at the thread it seems that GMC 2500 4X4 may have showed interest in this before both of us! Last edited by 72swbcamo; 05-10-2013 at 04:43 PM.

05-10-2013, 11:43 PM	#41
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap This is a difficult situation which I myself have been in the middle of several times. The problem is expressing interest does not say "I intend to buy it", although it does imply one may decide to. The real difficulty I have with this thread is it is a year old & just recently members have express interest. As I have been told myself, "I will take it" is the definitive sold statement. Dario1 did post b4 u asking a question which also implies interest. However if we assume everyone that asks questions, or expresses interest, is going to buy an item, some things would never be sold. So I guess in trying to be as fair as possible, since Dario1 posted earlier and stated he would take it, I will have to give him first shot. I hope this sounds fair to all. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon



Register or Log In To remove these advertisements.

05-11-2013, 05:07 PM	#42
72swbcamo Active Member Join Date: Dec 2003 Location: Waterbury, CT Posts: 591	Re: FS: 72 350 4 bolt main bare block cheap Hi Scott: let me know if Dario1 falls through. If the package becomes available I'll take it. Sorry for getting you in the middle of this issue. Posted via Mobile Device

05-11-2013, 05:19 PM	#43
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: 72 350 4 bolt main bare block cheap I definitely will, thanks for understanding. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

Register or Log In To remove these advertisements.