AR Big Block Chevy cam, springs & pushrods - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BossHogg69 · 11-15-2011, 12:56 AM

I have a Big Block Chevy (Mark IV) Comp XE294 cam (cam only, no lifters), Summit 1pc, .080" wall, 3/8" pushrods, and a set of Crower 68340 valvesprings for sale. The cam and pushrods have been installed, but never run, and the valvesprings have a few hours of runtime on them and are like new. The springs have been checked by a local machine shop (Rebel Rebuilders) are all are within spec. I changed over to a roller cam, so that's why I'm selling this stuff. Specs for everything are below. You can see what I paid for everything in the links provided below. I will take $220 SHIPPED!!!. First "I'll take it" gets it.

http://www.summitracing.com/parts/CCA-11-254-4/
Cam Style Hydraulic flat tappet
Basic Operating RPM Range 2,800-7,000
Duration at 050 inch Lift 250 int./256 exh.
Advertised Intake Duration 294
Advertised Exhaust Duration 306
Advertised Duration 294 int./306 exh. .
Valve Lift with Factory Rocker Arm Ratio 0.588 int./0.593 exh.
Lobe Separation (degrees) 110
Grind Number CB XE294H-10

http://www.summitracing.com/parts/SUM-1439250/
Summit Racing Part Number SUM-1439250
For Use with Guideplates Yes
Pushrod Tube Diameter 3/8 in.
Pushrod Material Chromoly
Intake Overall Length (in) 8.280 in.
Exhaust Overall Length (in) 9.250 in.
One-Piece Pushrod Yes
Wall Thickness (in) 0.080 in.
Heat-Treated Yes
Quantity Sold as a set of 16.

http://www.crower.com/valve-springs-...amper-797.html
Summit Racing Part Number CRO-68340-16
Number of Springs Per Valve Dual
Outside Diameter of Outer Spring (in) 1.500 in.
Coil Bind Height (in) 1.080 in.
Damper Spring Included Yes
Spring Rate (lbs/in) 452 lbs./in.
Inside Diameter of Outer Spring (in) 1.120 in.
Inside Diameter of Inner Spring (in) 0.755 in.
Quantity Sold as a set of 16.

BossHogg69 · 11-17-2011, 10:45 AM

ttt

**bowtie72** · 11-17-2011, 06:17 PM

Man I wish the cam was a little smaller I would jump on that deal. I live at 7200 ft. I think it would be to much.
Posted via Mobile Device

BossHogg69 · 12-13-2011, 09:04 PM

ttt for any Christmas shoppers...

BossHogg69 · 01-13-2012, 02:31 PM

ttt for Friday the 13th!

BossHogg69 · 02-04-2012, 01:19 PM

bump for the all those Valentine's Day shoppers... You KNOW your wife would rather have a hard hittin' big block over a little tennis bracelet!

BossHogg69 · 02-13-2012, 04:46 PM

ttt for TAX TIME!!! I know some of you are building a BBC with that fat refund check!

Critterman71 · 02-13-2012, 09:33 PM

TTT Would be sweet in my 402 for sure.

BossHogg69 · 03-11-2012, 04:18 AM

ttt...

BossHogg69 · 05-07-2012, 11:18 AM

ttt

BossHogg69 · 06-26-2012, 07:46 PM

anyone out there need any BB stuff?

BossHogg69 · 07-03-2012, 10:55 AM

4th of July deal of the day!

$220 - FREE SHIPPING anyone??

BossHogg69 · 08-11-2012, 04:25 PM

Ttt
Posted via Mobile Device

BossHogg69 · 12-15-2012, 01:24 AM

ttt for xmas

*bk2life* · 12-15-2012, 03:43 AM

seperate peices?

that cam is a bit big for some of our "street" motors..

BossHogg69 · 12-15-2012, 11:44 AM

What piece(s) did you have in mind?? Yeah, it's a stout cam. Should put a well built 454 (or bigger) well over the 550 hp range with a good set of heads.

BossHogg69 · 02-11-2013, 12:50 PM

ttt for tax refund season!

BossHogg69 · 02-15-2013, 05:16 PM

ttt for the weekend
Posted via Mobile Device

BossHogg69 · 02-25-2013, 07:49 AM

reasonable offers?

BossHogg69 · 03-13-2013, 01:39 PM

ttt

BossHogg69 · 05-04-2013, 12:04 PM

ttt

darkhorse970 · 05-04-2013, 07:56 PM

Would you seperate the package and take $50 for the push rods.

BossHogg69 · 05-04-2013, 09:47 PM

I would separate the pushrods for $60 and you pay shipping.

Camaro_nut2001 · 06-16-2013, 10:13 AM

Is everything still for sale? Please say yes, lol.

BossHogg69 · 06-17-2013, 08:10 PM

Yep, still have every bit of it.

11-15-2011, 12:56 AM	#1
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Big Block Chevy cam, springs & pushrods I have a Big Block Chevy (Mark IV) Comp XE294 cam (cam only, no lifters), Summit 1pc, .080" wall, 3/8" pushrods, and a set of Crower 68340 valvesprings for sale. The cam and pushrods have been installed, but never run, and the valvesprings have a few hours of runtime on them and are like new. The springs have been checked by a local machine shop (Rebel Rebuilders) are all are within spec. I changed over to a roller cam, so that's why I'm selling this stuff. Specs for everything are below. You can see what I paid for everything in the links provided below. I will take $220 SHIPPED!!!. First "I'll take it" gets it. http://www.summitracing.com/parts/CCA-11-254-4/ Cam Style Hydraulic flat tappet Basic Operating RPM Range 2,800-7,000 Duration at 050 inch Lift 250 int./256 exh. Advertised Intake Duration 294 Advertised Exhaust Duration 306 Advertised Duration 294 int./306 exh. . Valve Lift with Factory Rocker Arm Ratio 0.588 int./0.593 exh. Lobe Separation (degrees) 110 Grind Number CB XE294H-10 http://www.summitracing.com/parts/SUM-1439250/ Summit Racing Part Number SUM-1439250 For Use with Guideplates Yes Pushrod Tube Diameter 3/8 in. Pushrod Material Chromoly Intake Overall Length (in) 8.280 in. Exhaust Overall Length (in) 9.250 in. One-Piece Pushrod Yes Wall Thickness (in) 0.080 in. Heat-Treated Yes Quantity Sold as a set of 16. http://www.crower.com/valve-springs-...amper-797.html Summit Racing Part Number CRO-68340-16 Number of Springs Per Valve Dual Outside Diameter of Outer Spring (in) 1.500 in. Coil Bind Height (in) 1.080 in. Damper Spring Included Yes Spring Rate (lbs/in) 452 lbs./in. Inside Diameter of Outer Spring (in) 1.120 in. Inside Diameter of Inner Spring (in) 0.755 in. Quantity Sold as a set of 16. Attached Images __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!! Last edited by BossHogg69; 07-03-2012 at 10:56 AM.

11-17-2011, 10:45 AM	#2
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods ttt __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

11-17-2011, 06:17 PM	#3
bowtie72 Registered User Join Date: Mar 2007 Location: Colorado Posts: 363	Re: Big Block Chevy cam, springs & pushrods Man I wish the cam was a little smaller I would jump on that deal. I live at 7200 ft. I think it would be to much. Posted via Mobile Device __________________ 1968 SWB "Little White Truck" 1972 LWB LS 4l80 "Plain Jane!!"

12-13-2011, 09:04 PM	#4
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods ttt for any Christmas shoppers... __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

01-13-2012, 02:31 PM	#5
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods ttt for Friday the 13th! __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

02-04-2012, 01:19 PM	#6
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods bump for the all those Valentine's Day shoppers... You KNOW your wife would rather have a hard hittin' big block over a little tennis bracelet! __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

02-13-2012, 04:46 PM	#7
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods ttt for TAX TIME!!! I know some of you are building a BBC with that fat refund check! __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

02-13-2012, 09:33 PM	#8
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: Big Block Chevy cam, springs & pushrods TTT Would be sweet in my 402 for sure.

03-11-2012, 04:18 AM	#9
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods ttt... __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

05-07-2012, 11:18 AM	#10
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods ttt __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

06-26-2012, 07:46 PM	#11
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods anyone out there need any BB stuff? __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

07-03-2012, 10:55 AM	#12
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods 4th of July deal of the day! $220 - FREE SHIPPING anyone?? __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

08-11-2012, 04:25 PM	#13
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods Ttt Posted via Mobile Device __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

12-15-2012, 01:24 AM	#14
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods ttt for xmas __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

12-15-2012, 03:43 AM	#15
bk2life Account Suspended Join Date: Oct 2012 Location: phx, az Posts: 868	Re: Big Block Chevy cam, springs & pushrods seperate peices? that cam is a bit big for some of our "street" motors..



Register or Log In To remove these advertisements.

12-15-2012, 11:44 AM	#16
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods What piece(s) did you have in mind?? Yeah, it's a stout cam. Should put a well built 454 (or bigger) well over the 550 hp range with a good set of heads. __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

02-11-2013, 12:50 PM	#17
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods ttt for tax refund season! __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

02-15-2013, 05:16 PM	#18
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods ttt for the weekend Posted via Mobile Device __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

02-25-2013, 07:49 AM	#19
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods reasonable offers? __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

03-13-2013, 01:39 PM	#20
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods ttt __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

05-04-2013, 12:04 PM	#21
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods ttt __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

05-04-2013, 07:56 PM	#22
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,104	Re: Big Block Chevy cam, springs & pushrods Would you seperate the package and take $50 for the push rods. __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

05-04-2013, 09:47 PM	#23
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods I would separate the pushrods for $60 and you pay shipping. __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

06-16-2013, 10:13 AM	#24
Camaro_nut2001 Chevy Lover Till The End. Join Date: Dec 2009 Location: Mascot TN. Posts: 795	Re: Big Block Chevy cam, springs & pushrods Is everything still for sale? Please say yes, lol. __________________ 1969 Chevy SWB Big Block - Under the knife as of 12/26/2011 1989 Chevy Silverado, 4X4 - Daily Driver 1996 Chevy Suburban K1500 - 4-Wheeler, Campin Truck 1968 Chevrolet Impala Sport Coupe - 327/350hp, TH400, all original. Members I've met: BamaBaxter, My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=500359

06-17-2013, 08:10 PM	#25
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Big Block Chevy cam, springs & pushrods Yep, still have every bit of it. __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

Register or Log In To remove these advertisements.