Anybody using the LMC power windows? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1970/327/c10 · 12-25-2013, 05:05 PM

I wanting to get some power windows for my pickup and was wandering how good the power windows from LMC are?

eldogg · 12-26-2013, 09:23 AM

Check out Nu-Relics. http://nu-relics.com/index.html

**Razorbacker** · 12-26-2013, 10:01 AM

I have the LMC kit installed on my K10. They were already installed by the PO and I thought it was pretty cool my truck had power windows.

Well shortly after I purchased the truck the passenger side motor failed. That's when I found out LMC does not have any spare parts support for the product they sale.

I would not recommend LMC's kit, cheaply made, the electric motors are weak and LMC Customer Service will be absolutely no help if you have a problem down the road.

**1970 CST Short Wide** · 12-26-2013, 01:08 PM

http://www.a1electric.com/catalog/cat_chevtruck.htm
These are the ones I installed. Very easy to do and work perfect.
I highly recommend them

cheyenne shortstep · 12-26-2013, 05:30 PM

I also recommend A1 electric windows, after 15 years on my daily driven '72 the only problem I have had was one of the switches went bad. LMC sells JUNK and nothing but JUNK.

Wrenchbender Ret · 12-26-2013, 06:06 PM

I put the LMC kit in a 63 I used to have. It worked good. It was a lot of work installing it. It uses the original regulators so the mech. needs to be working freely or it will put excess load on the motor. I agree with the other guys, the A1 is a better setup if you want to spend a little more money. I used the A1 in my 70.

1970/327/c10 · 12-26-2013, 10:05 PM

Thanks for the info. I was watching videos on youtube and i didn't like how they installed. I will probably go with the nu-relics when i get around it.

bonnieclyde100 · 12-26-2013, 10:16 PM

here is another option if you have any fabrication skills and need to save a little money

http://67-72chevytrucks.com/vboard/s...d.php?t=604386

1970/327/c10 · 12-26-2013, 10:34 PM

You are a life saver. I did not want to spend 300 on those. I found me a project to do now. Thank you

bonnieclyde100 · 12-26-2013, 10:52 PM

your welcome let me know how it goes , pics would be good to

1970/327/c10 · 12-26-2013, 11:16 PM

will do, wouldn't happen to know of a good wiring kit or diy kit that i could make that looked good.

bonnieclyde100 · 12-26-2013, 11:40 PM

found one on ebay and im sure you can find alot more if you look a while

http://www.ebay.com/itm/12v-Universa...-/141079053628

bonnieclyde100 · 12-26-2013, 11:44 PM

here is another site that has alot to choose from

http://www.a1electric.com/switches.htm

1970/327/c10 · 12-27-2013, 01:26 AM

thanks, now I just have to get in gear and get it made

12-25-2013, 05:05 PM	#1
1970/327/c10 Registered User Join Date: Jan 2012 Location: Walker, MO Posts: 101	Anybody using the LMC power windows? I wanting to get some power windows for my pickup and was wandering how good the power windows from LMC are? __________________ Drivin People Insane With my Classic Chevy!

12-26-2013, 09:23 AM	#2
eldogg Registered User Join Date: May 2007 Location: Mooresville NC/Gainesville GA Posts: 499	Re: Anybody using the LMC power windows? Check out Nu-Relics. http://nu-relics.com/index.html __________________ Eric Evans Queen City Shop Truck http://67-72chevytrucks.com/vboard/s...34#post6139834 66 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=543110

12-26-2013, 10:01 AM	#3
Razorbacker Senior Member Join Date: Aug 2011 Location: Benton, AR. Posts: 239	Re: Anybody using the LMC power windows? I have the LMC kit installed on my K10. They were already installed by the PO and I thought it was pretty cool my truck had power windows. Well shortly after I purchased the truck the passenger side motor failed. That's when I found out LMC does not have any spare parts support for the product they sale. I would not recommend LMC's kit, cheaply made, the electric motors are weak and LMC Customer Service will be absolutely no help if you have a problem down the road. __________________ Tony 1972 Chevy K10 SWB Custom Deluxe 350\|350\|NP205 2018 GMC Sierra Z/71 Crew 2008 GMC Yukon 2007 Chevy 1500 LT 1967 Pontiac Firebird 400

12-26-2013, 01:08 PM	#4
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,101	Re: Anybody using the LMC power windows? http://www.a1electric.com/catalog/cat_chevtruck.htm These are the ones I installed. Very easy to do and work perfect. I highly recommend them __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

12-26-2013, 05:30 PM	#5
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Anybody using the LMC power windows? I also recommend A1 electric windows, after 15 years on my daily driven '72 the only problem I have had was one of the switches went bad. LMC sells JUNK and nothing but JUNK.

12-26-2013, 06:06 PM	#6
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,204	Re: Anybody using the LMC power windows? I put the LMC kit in a 63 I used to have. It worked good. It was a lot of work installing it. It uses the original regulators so the mech. needs to be working freely or it will put excess load on the motor. I agree with the other guys, the A1 is a better setup if you want to spend a little more money. I used the A1 in my 70.

12-26-2013, 10:05 PM	#7
1970/327/c10 Registered User Join Date: Jan 2012 Location: Walker, MO Posts: 101	Re: Anybody using the LMC power windows? Thanks for the info. I was watching videos on youtube and i didn't like how they installed. I will probably go with the nu-relics when i get around it. __________________ Drivin People Insane With my Classic Chevy!

12-26-2013, 10:16 PM	#8
bonnieclyde100 Registered User Join Date: Jan 2012 Location: Henderson,TX Posts: 336	Re: Anybody using the LMC power windows? here is another option if you have any fabrication skills and need to save a little money http://67-72chevytrucks.com/vboard/s...d.php?t=604386

12-26-2013, 10:34 PM	#9
1970/327/c10 Registered User Join Date: Jan 2012 Location: Walker, MO Posts: 101	Re: Anybody using the LMC power windows? You are a life saver. I did not want to spend 300 on those. I found me a project to do now. Thank you __________________ Drivin People Insane With my Classic Chevy!

12-26-2013, 10:52 PM	#10
bonnieclyde100 Registered User Join Date: Jan 2012 Location: Henderson,TX Posts: 336	Re: Anybody using the LMC power windows? your welcome let me know how it goes , pics would be good to

12-26-2013, 11:16 PM	#11
1970/327/c10 Registered User Join Date: Jan 2012 Location: Walker, MO Posts: 101	Re: Anybody using the LMC power windows? will do, wouldn't happen to know of a good wiring kit or diy kit that i could make that looked good. __________________ Drivin People Insane With my Classic Chevy!

12-26-2013, 11:40 PM	#12
bonnieclyde100 Registered User Join Date: Jan 2012 Location: Henderson,TX Posts: 336	Re: Anybody using the LMC power windows? found one on ebay and im sure you can find alot more if you look a while http://www.ebay.com/itm/12v-Universa...-/141079053628

12-26-2013, 11:44 PM	#13
bonnieclyde100 Registered User Join Date: Jan 2012 Location: Henderson,TX Posts: 336	Re: Anybody using the LMC power windows? here is another site that has alot to choose from http://www.a1electric.com/switches.htm

12-27-2013, 01:26 AM	#14
1970/327/c10 Registered User Join Date: Jan 2012 Location: Walker, MO Posts: 101	Re: Anybody using the LMC power windows? thanks, now I just have to get in gear and get it made __________________ Drivin People Insane With my Classic Chevy!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.