ID Rear Cab Mount Brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captainfab** · 11-18-2013, 01:44 AM

These are a pair of original rear cab mount brackets, that have been abrasive blasted. There is a little pitting from rust where the rubber mount goes, but they are very useable. I have reamed the rivet holes out to 7/16" and included new grade 8 hardware. I'm asking $55.00 shipped in the US.

LostMy65 · 11-18-2013, 01:53 AM

These also work as a good solution for the 3/4 rear cab mounts that often fail. I got mine from Tony, but these you have listed are a great deal less $.

Leroy-B1 · 11-18-2013, 08:30 AM

I may need these I'm about 10 hours from home working and can't check out my frame until Friday....changing the frame from my 60 to a 66 frame....will also need the power steering conversion and the brake booster bracket as well

**Captainfab** · 11-27-2013, 02:31 AM

Ttt

natecr · 01-02-2014, 12:37 AM

Still for sale?

**Captainfab** · 01-02-2014, 12:42 AM

Yes I still have them.

natecr · 01-02-2014, 12:42 AM

Oh and would i need your steering box adaptor to put a 72' manual box on my 66 that im swapping a 72 front end in?

natecr · 01-02-2014, 01:29 AM

Obviously don't want to spend extra on shipping if i don't need it. Do you have any solutions for track bars? I got a ho52 being replaced by a leaf spring 12 bolt so i need to get a track bar mount or a whole new set up.

**Captainfab** · 01-02-2014, 01:47 AM

Yes you will need a steering box adapter plate, and possibly the tube and flange if you are keeping the original steeing column. Why not just go with a power steering box? I do not have anything for the panhard bar. You can simply cut the original off of the HO52 and weld it to the 12 bolt axle tube. I do have new trailing arm mounts though.

Quote:

Originally Posted by natecr

Oh and would i need your steering box adaptor to put a 72' manual box on my 66 that im swapping a 72 front end in?

Quote:

Originally Posted by natecr

Obviously don't want to spend extra on shipping if i don't need it. Do you have any solutions for track bars? I got a ho52 being replaced by a leaf spring 12 bolt so i need to get a track bar mount or a whole new set up.

natecr · 01-02-2014, 03:43 AM

Dang was kinda assuming the manual box would bolt in cause its a manual box truck.

natecr · 01-02-2014, 03:45 AM

Quote:

Originally Posted by natecr

Dang was kinda assuming the manual box would bolt in cause its a manual box truck.

And i have a good manual box and i don't have any power steering items.

**Captainfab** · 01-03-2014, 12:01 AM

If you just want manual steering why not keep your original steeing box?

If you did want power steering, a power steering box shouldn't be that hard to find over there. GM made millions of them from '68-'87.

Quote:

Originally Posted by natecr

Dang was kinda assuming the manual box would bolt in cause its a manual box truck.

Quote:

Originally Posted by natecr

And i have a good manual box and i don't have any power steering items.

natecr · 01-03-2014, 01:36 AM

Would it bolt to the 72 steering? I want the cab mounts what do we do for pay pal?

**Captainfab** · 01-03-2014, 01:52 AM

Yes your original pitman arm will bolt up to the '71-'87 draglinks.

I'll send you a PM with payment details.

Quote:

Originally Posted by natecr

Would it bolt to the 72 steering? I want the cab mounts what do we do for pay pal?

natecr · 01-03-2014, 01:58 AM

I didnt think it would. Well thats cool. Thanks for the info and the cab mounts!

**Captainfab** · 01-04-2014, 01:02 AM

SOLD to natecr

Thanks Nate, they are on their way

natecr · 01-08-2014, 01:15 AM

Got them yesterday thanks again. Keeping an eye out for parts from you i can use! On a side note i have a c20 looking for pan hard bar bushings. All the poly one say only for c10 any ideas? Are the trailing arm bushings the same for c10 and c20?

**Captainfab** · 01-08-2014, 02:35 AM

Both the panhard bar and the trailing arm bushings are the same between the C10 and C20.

Quote:

Originally Posted by natecr

Got them yesterday thanks again. Keeping an eye out for parts from you i can use! On a side note i have a c20 looking for pan hard bar bushings. All the poly one say only for c10 any ideas? Are the trailing arm bushings the same for c10 and c20?

11-18-2013, 01:44 AM	#1
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Rear Cab Mount Brackets These are a pair of original rear cab mount brackets, that have been abrasive blasted. There is a little pitting from rust where the rubber mount goes, but they are very useable. I have reamed the rivet holes out to 7/16" and included new grade 8 hardware. I'm asking $55.00 shipped in the US. Attached Images __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-18-2013, 01:53 AM	#2
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Rear Cab Mount Brackets These also work as a good solution for the 3/4 rear cab mounts that often fail. I got mine from Tony, but these you have listed are a great deal less $. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

11-18-2013, 08:30 AM	#3
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: Rear Cab Mount Brackets I may need these I'm about 10 hours from home working and can't check out my frame until Friday....changing the frame from my 60 to a 66 frame....will also need the power steering conversion and the brake booster bracket as well

11-27-2013, 02:31 AM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Rear Cab Mount Brackets Ttt __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-02-2014, 12:37 AM	#5
natecr Registered User Join Date: Apr 2010 Location: tacoma,wa Posts: 57	Re: Rear Cab Mount Brackets Still for sale? __________________ 66' custom camper 327/3spd 3.5/5 drop 17"s 2013 Subaru STI stage 1, exhaust, springs, sways ect 2002 mustang Gt. Paxton novi 2000, caged, tubular everything, 441/409 hp/tq too much to list. 1994 dodge cummins, straight piped, nv4500 swapped/built too much to list.

01-02-2014, 12:42 AM	#6
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Rear Cab Mount Brackets Yes I still have them. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-02-2014, 12:42 AM	#7
natecr Registered User Join Date: Apr 2010 Location: tacoma,wa Posts: 57	Re: Rear Cab Mount Brackets Oh and would i need your steering box adaptor to put a 72' manual box on my 66 that im swapping a 72 front end in? __________________ 66' custom camper 327/3spd 3.5/5 drop 17"s 2013 Subaru STI stage 1, exhaust, springs, sways ect 2002 mustang Gt. Paxton novi 2000, caged, tubular everything, 441/409 hp/tq too much to list. 1994 dodge cummins, straight piped, nv4500 swapped/built too much to list.

01-02-2014, 01:29 AM	#8
natecr Registered User Join Date: Apr 2010 Location: tacoma,wa Posts: 57	Re: Rear Cab Mount Brackets Obviously don't want to spend extra on shipping if i don't need it. Do you have any solutions for track bars? I got a ho52 being replaced by a leaf spring 12 bolt so i need to get a track bar mount or a whole new set up. __________________ 66' custom camper 327/3spd 3.5/5 drop 17"s 2013 Subaru STI stage 1, exhaust, springs, sways ect 2002 mustang Gt. Paxton novi 2000, caged, tubular everything, 441/409 hp/tq too much to list. 1994 dodge cummins, straight piped, nv4500 swapped/built too much to list.

01-02-2014, 03:43 AM	#10
natecr Registered User Join Date: Apr 2010 Location: tacoma,wa Posts: 57	Re: Rear Cab Mount Brackets Dang was kinda assuming the manual box would bolt in cause its a manual box truck. __________________ 66' custom camper 327/3spd 3.5/5 drop 17"s 2013 Subaru STI stage 1, exhaust, springs, sways ect 2002 mustang Gt. Paxton novi 2000, caged, tubular everything, 441/409 hp/tq too much to list. 1994 dodge cummins, straight piped, nv4500 swapped/built too much to list.

01-03-2014, 01:36 AM	#13
natecr Registered User Join Date: Apr 2010 Location: tacoma,wa Posts: 57	Re: Rear Cab Mount Brackets Would it bolt to the 72 steering? I want the cab mounts what do we do for pay pal? __________________ 66' custom camper 327/3spd 3.5/5 drop 17"s 2013 Subaru STI stage 1, exhaust, springs, sways ect 2002 mustang Gt. Paxton novi 2000, caged, tubular everything, 441/409 hp/tq too much to list. 1994 dodge cummins, straight piped, nv4500 swapped/built too much to list.

01-03-2014, 01:58 AM	#15
natecr Registered User Join Date: Apr 2010 Location: tacoma,wa Posts: 57	Re: Rear Cab Mount Brackets I didnt think it would. Well thats cool. Thanks for the info and the cab mounts! __________________ 66' custom camper 327/3spd 3.5/5 drop 17"s 2013 Subaru STI stage 1, exhaust, springs, sways ect 2002 mustang Gt. Paxton novi 2000, caged, tubular everything, 441/409 hp/tq too much to list. 1994 dodge cummins, straight piped, nv4500 swapped/built too much to list.

01-04-2014, 01:02 AM	#16
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Rear Cab Mount Brackets SOLD to natecr Thanks Nate, they are on their way __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-08-2014, 01:15 AM	#17
natecr Registered User Join Date: Apr 2010 Location: tacoma,wa Posts: 57	Re: Rear Cab Mount Brackets Got them yesterday thanks again. Keeping an eye out for parts from you i can use! On a side note i have a c20 looking for pan hard bar bushings. All the poly one say only for c10 any ideas? Are the trailing arm bushings the same for c10 and c20? __________________ 66' custom camper 327/3spd 3.5/5 drop 17"s 2013 Subaru STI stage 1, exhaust, springs, sways ect 2002 mustang Gt. Paxton novi 2000, caged, tubular everything, 441/409 hp/tq too much to list. 1994 dodge cummins, straight piped, nv4500 swapped/built too much to list.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.