Where can I get decent wiper arms?

[zenchal26]

lmc

[Russell Ashley]

Did you buy a set from LMC? And, are they polished stainless/chrome or painted silver?. I just got an LMC sale catalog and I did notice that they have wiper arms, but I guessed that they were probably from the same source as the ones I have.

[SCHRUMGMC]

Thank God I still have my originals

[whitedog76]

Is there any late model cars/trucks that will work?

[capnduane]

Rockauto has the stock Anco arms for $22 each. http://www.rockauto.com/catalog/x,ca...,parttype,8848 pic shows stock wiper arms with Rockauto blades. Works great!

[zenchal26]

Look like the ones in pic from rockauto they are polished straight blade

[Iceburgh]

New port engineering.....well worth the money

[G&R's57GMC]

Originally Posted by capnduane

Rockauto has the stock Anco arms for $22 each. http://www.rockauto.com/catalog/x,ca...,parttype,8848 pic shows stock wiper arms with Rockauto blades. Works great!

Ah yes, These are Anco adjustable wiper arms.

The beauty of these is that you can adjust the length of the arm and the angle of the blade so it sits level when parked.

[G&R's57GMC]

Originally Posted by zenchal26

Look like the ones in pic from rockauto they are polished straight blade

Well the blades offered by Anco and Trico for this application they are articulated ..

http://www.rockauto.com/catalog/x,ca...,parttype,8852

Here's the Anco and Trico blades.

This is the Anco arm and Trico blade on capnduane's truck.

[Speedbumpauto]

I got mine from Tuckers Truck. They are polished stainless but they fit well. I was also impressed with the customer service as I needed special attention since the top was chopped. They went through options of arms and blades on the phone until it seemed something would work. When they got here, they fit. I do live in AZ though and I won't drive in the rain unless I get fooled by mother nature.

[Rednek13x]

I have the original arms, it will even be ran off vacuum. But anyone know how they attached these modern style wiper blads to what looks like stock arms?

[G&R's57GMC]

Originally Posted by Rednek13x

I have the original arms, it will even be ran off vacuum. But anyone know how they attached these modern style wiper blads to what looks like stock arms?

What you have are Anco adjustable arms and late replacement snow blades, Nothing original there.

BTW you can adjust the angle of the blade to lay even with the bottom of the windshield when off . Just loosen the screw and move the blade and retighten the screw.

[Rednek13x]

Not my truck, is there a way to attach late model blades to stock arms?

[57chevyman]

I used theses, I think theyre pretty good

http://www.ebay.com/itm/WIPER-SET-CH...8c9869&vxp=mtr

[G&R's57GMC]

Originally Posted by Rednek13x

Not my truck, is there a way to attach late model blades to stock arms?

Sorry to say No as the stock arms have a hooked end and the late stuff takes a straight end.

[Rednek13x]

Originally Posted by G&R's57GMC

Sorry to say No as the stock arms have a hooked end and the late stuff takes a straight end.

Thanks, i wasnt sure, havnt looked at my stock ones in a few years. I know that the blades are shot so ill just have to get replacement ones. Not a big deal.