Operation Rustbucket

[C4vert]

Here is the 89 K1500 Silverado stepside 4x4 I just purchased as my new project. It has a 5.7. I paid $500 for it. This is as bought.

[C4vert]

First thing I have done is replace the following
Spark plugs, spark plug wires, rotor, distributor cap, radiator cap, tensioner, tensioner brace, serpentine belt, fuel filter, air cleaner and filter, IAC.

I also changed the oil and filter, coolant and rear differential service.

Up next will be the transfer case, front diff and tranny service.

It already had a new radiator, alternator and battery

[C4vert]

I then scrubbed and deodorized the interior.







Going to replace the fenders and doors as well as new cab corners and rockers. Floor is solid. Then a repaint

[lha1992]

Nice project!!! Boy I never knew for them to rust that high up on the door. Can't wait to see what you do next with her! An only $500!!!

[C4vert]

They had those stainless steel panels on the truck and I think that is what started the rust they are still in holding the bottom of the doors together

[C4vert]

Replaced the throttle position sensor and what a difference that made.

[C4vert]

New front rotors, pads, caliper and hose.

Before




After




Also added new 17 in tires and rims

[C4vert]

Adjusted the shift indicator cable and then replaced the actuator and repaired some wiring and the 4x4 is working. Also decided to drop in a L98 5.7L out of a 88 GTA I rebuilt for a future project and this is it.

[flashed]

Even with the rust it looks like a good deal from here ,congrats .

[C4vert]

Removed the fenders and hood, in preparation for the engine removal and installation of the 5.7L L98 TPI .

[IMG]http://img.photobucket.com/albums/v345/Ogstad/imagejpg1_zpse701e70a.jpg[/IMG

[Hankster]

Anymore on this truck?