Does anyone here run Sanderson BB8 headers on their big block trucks?

[Fitz]

Originally Posted by ts71281

I am interested in buying another set of headers for my '70 C10 with a 468. The current supertech headers are junk and are coming out with a sawzall.

I want to know how much clearance the BB8's have around everything, and if they're going to rattle on any suspension parts/frame/motor mounts/etc.

I have a 4 speed in my truck so I need to keep in mind that the #7 primary needs to be enough forward I can run the block mounted ballstud from the block to the frame without the headers hitting. Does anyone have pictures of the BB8's or other sanderson headers installed?

Thanks,

Joe

Aye Aye, Captain! If this isn't a big block there's no such thing and those are Sanderson BB8 block huggers. When I was fitting up the exhaust I had to move the oil filter so I wouldn't have to remove the headers to change the filter. I had already mounted a remote filter so that wasn't much of a problem. As you can see, my truck has a turbo 400 automatic, not a stick. Getting the trans dust shield on takes some fiddling but it does fit.