|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-18-2014, 10:23 PM
|
#1 |
|
Registered User
Join Date: Jul 2014
Location: Kansas
Posts: 53
|
Universal trans coolers.
Finally got my trans back today from being rebuilt for my 87, took over a month to get back. I was advised to run an external trans cooler, what's the biggest one I can get away with? Would this suffice?
http://www.jegs.com/webapp/wcs/store...&storeId=10001 |
|
|
|
08-19-2014, 07:29 AM
|
#2 |
|
BAD BOW-Silverado XST
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
|
Re: Universal trans coolers.
Most are rated by GVW. I installed one large enough to cover half the radiator. Basically from the center hood bracket all the way to the radiator end. I used SS braided hoses and AN fittings.
|
|
|
|
|
08-19-2014, 08:08 AM
|
#3 |
|
Registered User
Join Date: Mar 2012
Location: edgartown mass
Posts: 852
|
Re: Universal trans coolers.
if i recall you want your trans around 175??so a gauge might be helpfull too. also call the trans shop and see what tthey say is best
__________________
1986 c20 "the hillbilly" 350 sm465 3.42gears 21mpg at 70mph 1985 k30 "the ice cream truck from hell" no rust az truck 197-8??? c30 "ramp truck" 454 1978 monte carlo 350 350th with 2.73 gears. no rust. sc car |
|
|
|
|
08-19-2014, 08:44 AM
|
#4 | |
|
Registered User
Join Date: Jul 2014
Location: Kansas
Posts: 53
|
Re: Universal trans coolers.
Quote:
|
|
|
|
|
|
08-19-2014, 09:59 AM
|
#5 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
Re: Universal trans coolers.
I went and got the largest one I could get for my work trucks.. the larger the trailer its towing the bigger the cooler you need
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
08-19-2014, 10:23 AM
|
#6 |
|
BAD BOW-Silverado XST
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
|
Re: Universal trans coolers.
I live in a hot climate area, Texas. The more cooling the better. In the winter, yes, I can tell trans temps takes a few miles to warm the oil. The trans shifts harder in cold weather until oil temps are up. I drive slower in cooler weather so oil has time to heat up. If I remember correctly, mine is rated for 24,000 lbs GVW. Mine is routed inline with the radiator cooler.
|
|
|
|
|
08-19-2014, 10:41 AM
|
#7 |
|
Registered User
Join Date: Dec 2013
Location: Columbus, Oh
Posts: 367
|
Re: Universal trans coolers.
Use your Original Radiator cooler as well. Plumb the extra cooler after the radiator in your flow path.
|
|
|
|
|
08-19-2014, 07:28 PM
|
#8 |
|
Registered User
Join Date: Jul 2011
Location: back 40, bc
Posts: 3,903
|
Re: Universal trans coolers.
x2^^^hook up your cooler after the factory one. i'm running a 30 000 lb B&M cooler on my crew, & if you want a few more degrees cooler & easier oil changes, pick up a Derale cooling tranny pan. the extra cooling & capacity is nice, but not getting an ATF bath really makes it worthwhile
http://derale.com/products/transmiss...s/cooling-pans |
|
|
|
|
08-20-2014, 12:09 AM
|
#9 |
|
Registered User
 Join Date: Oct 2011
Location: Wildomar, CA
Posts: 466
|
Re: Universal trans coolers.
I installed a Tru-Cool LPD (low pressure drop) cooler after building my 700.
I went with this one: http://www.transmissioncoolers.us/4589.html Fit nicely on one side of the radiator. Used their engine oil cooler version on the other side. |
|
|
|
|
08-20-2014, 01:19 AM
|
#10 |
|
Registered User
Join Date: Jul 2014
Location: Kansas
Posts: 53
|
Re: Universal trans coolers.
I should note fellas this is mainly gonna be my winter/huntin/spare truck rig, not my daily driver so it won't suffer the kansas heat like my blazer.
|
|
|
|
|
08-20-2014, 03:28 AM
|
#11 |
|
Registered User
Join Date: Apr 2013
Location: homestead florida
Posts: 312
|
Re: Universal trans coolers.
on those DERALE pans with the temp bung can an analog water temp gauge be used to monitor temps ????
|
|
|
|
|
08-20-2014, 10:40 PM
|
#12 |
|
Registered User
Join Date: Jul 2014
Location: Kansas
Posts: 53
|
Re: Universal trans coolers.
|
|
|
|
|
08-21-2014, 12:32 AM
|
#13 |
|
Moderator
 
Join Date: Oct 2008
Location: Wentworth, NH
Posts: 4,977
|
Re: Universal trans coolers.
Probably not worth mentioning but I will anyway.
Be sure both factory and aftermarket trans coolers fluid flow is bottom to top not top to bottom.
__________________
1959 M35A2 LDT465-1D SOLD 1967 Dodge W200 B383, NP420/NP201 SOLD 1969 Dodge Polara 500 B383, A833 SOLD 1972 Ford F250 FE390, NP435/NP205 SOLD 1976 Chevy K20, 6.5L, NV4500/NP208 SOLD 1986 M1008 CUCV SOLD 2000 GMC C2500, TD6.5L, NV4500 2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263 2009 Impala SS LS4 V8 RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials...
And please let us know if and how your repairs were successful. |
|
|
|
|
08-21-2014, 01:56 AM
|
#14 | |
|
Registered User
Join Date: Jul 2011
Location: back 40, bc
Posts: 3,903
|
Re: Universal trans coolers.
Quote:
i have an older Derale pan & it does'nt have the temp bung so i'm not sure, you can try one off a later model diesel, threads are pretty common |
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
