Part # help.. Hub retaining ring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

airdale94 · 09-02-2014, 05:32 PM

The part #'s for flat washers, nuts, and retaining washers are the same for the H052, Dana 60, and the Corp. 14 bolt are the same. Maybe they are for the bearing retainer. I would check the groove in the hub also. It always seems those are tricky to look up. I looked on RockAuto, that's were I got my retaining washers for my 14 bolt, I had to punch the part number into search.

72CampSpecial · 09-02-2014, 07:09 PM

Quote:

Originally Posted by airdale94

The part #'s for flat washers, nuts, and retaining washers are the same for the H052, Dana 60, and the Corp. 14 bolt are the same. Maybe they are for the bearing retainer. I would check the groove in the hub also. It always seems those are tricky to look up. I looked on RockAuto, that's were I got my retaining washers for my 14 bolt, I had to punch the part number into search.

thanks for the clarification..

09-02-2014, 05:32 PM	#1
airdale94 Registered User Join Date: Jan 2007 Location: Topeka,KS Posts: 778	Re: Part # help.. Hub retaining ring The part #'s for flat washers, nuts, and retaining washers are the same for the H052, Dana 60, and the Corp. 14 bolt are the same. Maybe they are for the bearing retainer. I would check the groove in the hub also. It always seems those are tricky to look up. I looked on RockAuto, that's were I got my retaining washers for my 14 bolt, I had to punch the part number into search. __________________ 68' C20. 283CI w/55CC 305HO heads, NP435 Close Ratio, Corp. 14 bolt FF 3.21, 75' front end swap (everything but the X-member).



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.