ID WTB: np205 shifter, BB power steering, etc

[Gawdly]

I got the power steering stuff handled, thanks Pickmup.

[Gawdly]

Originally Posted by teeitup

Here is the parts I told you about

Thanks! I've got the pedal assembly and cover handled now.

[Gawdly]

Originally Posted by 1rippen6

I think I have everything but the shifter bolt and the BB ps parts. Everything is from a blazer so cab mounts and shifter I am not sure if they are correct and the s link is a flat bar my 71 is that way. Cab mounts from a 72 blazer. I took the picture of the throttle pedal thinking you needed that I have a better brake pedal assembly with the pad still on the pedal and I can get you a picture of that if needed. I also have the clutch block off plate but do not have it pictured. 225 shipped for everything.

I looked at the body mount and I believe what you have there from a blazer is shaped differently. I may be interested in the high hump cover and the short bar. I need to hear back from desert rat (he's already shipping me some other stuff so if he has a nice cover I'll probably go that way).

[1rippen6]

Took the linkage to work to sandblast and noticed the pin was cracked so I had a coworker weld it. He had some issues because apparently it was brazed from the factory but he did get it welded and it should never fail. I attached some photos of what is looks like now just want to make sure you are still interested if not that is fine I can refund your money. I will take it to work with me and shipped out after work if you are still interested

[Gawdly]

As long as it works, I'm good... ship it.

Thanks Everyone, everything I needed from this thread is either here now or in transit. Appreciate all the help.

[1rippen6]

Will ship tomorrow