Hood to cowl gasket on a taskforce - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tbrown5079 · 10-25-2014, 01:09 PM

I know this isn't rocket science but does it matter which way you put the hood to cowl rubber on? Does the split go to the front or back? Does the side with the lip on go on top or bottom? I was in the garage and wanted to do a quick job and thought this would be easy, but then didn't know which way to go. Any suggestions?

Thanks, tbrown

dwcsr · 10-25-2014, 01:35 PM

split to the back

tbrown5079 · 10-25-2014, 10:55 PM

OK thanks, I was looking at it again and realized the one side is flat and the other curved so yhe flat side would be on the bottom.

10-25-2014, 01:09 PM	#1
tbrown5079 Registered User Join Date: Feb 2007 Location: Blairsville, PA Posts: 301	Hood to cowl gasket on a taskforce I know this isn't rocket science but does it matter which way you put the hood to cowl rubber on? Does the split go to the front or back? Does the side with the lip on go on top or bottom? I was in the garage and wanted to do a quick job and thought this would be easy, but then didn't know which way to go. Any suggestions? Thanks, tbrown __________________ tbrown's 56 Cameo Build

10-25-2014, 01:35 PM	#2
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: Hood to cowl gasket on a taskforce split to the back

10-25-2014, 10:55 PM	#3
tbrown5079 Registered User Join Date: Feb 2007 Location: Blairsville, PA Posts: 301	Re: Hood to cowl gasket on a taskforce OK thanks, I was looking at it again and realized the one side is flat and the other curved so yhe flat side would be on the bottom. __________________ tbrown's 56 Cameo Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.