|
12-08-2014, 08:40 PM
|
#1 |
|
Registered User
Join Date: Mar 2004
Location: Sparta, WI
Posts: 86
|
Transmission Yolk ?
How much the yolk should be sticking out at the transmission? Would the amount sticking out be the same as my 85 K5 4x4? Do these take a longer yolk then a car would, have yolk out of a turbo 350 that was in a car. Truck is a 81 C20 that I swapped in a 700R4. Switching to a one piece drive shaft. Rear is a corporate 14 bolt full floater. My truck had a turbo 400 with a two piece shaft. I don't want to cut the shaft just in case the 700R4 doesn't work out.
Thanks, Eric
__________________
Eric 2001 Ford F350 EC dually 7.3 1981 Chevy C20 to K20 350 1978 Oldsmobile Cutlass Supreme 455 Pontiac 1969 Pontiac GTO 400 |
|
|
|
12-09-2014, 08:56 AM
|
#2 |
|
Registered User
Join Date: Dec 2008
Location: Foristell, MO
Posts: 418
|
Re: Transmission Yolk ?
http://www.maliburacing.com/auto_tranny_id.htm This has good info on lengths. I put a 350 where a 4spd was went to single drive shaft I used a 350 yolk. iirc have an 1" +/- in the tailshaft
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
