86 Burb need rear wheel tub ideas - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C.W · 12-23-2014, 02:05 AM

So I new I had a little rust starting and due to a blown diff with a flip kit I decided to pull the leafs since they were sagged anyway which seemed easier to remove the spare tire well to get the rear shackle bolt out. Anyway turns out the rear inner tubs are BAD!
I also found more rust the shop that did the body for the previous owner must have thought wouldnt be seen if they hid it under new outer panels. So my dilemma is to scrap or proceed with my original end plan and bag it. I prefer choice #2

Can you guys that have done step notches and floor/ wheel tub mods needed please post pics and maybe a brief description of what you used as far as parts, etc?
Id like to save this truck rather than scrap it.

blazer2007 · 12-23-2014, 11:05 AM

I,m just finishing up my blazer floor,I raised the floor 3 inches and made some wheel tubs.

blazer2007 · 12-23-2014, 11:07 AM

one other pic

C.W · 12-23-2014, 04:00 PM

Your not that far away from me. What gauge steel are you using?

blazer2007 · 12-24-2014, 11:10 AM

I used 14 G. for the floor and 16G. for the tubs,.Maybe see you at one of the car shows this year

C.W · 01-01-2015, 01:12 AM

Any other pics out there?
Blazer 2007 did you seal them right to the inside of the quarter or just what you can see in the pics?

blazer2007 · 01-01-2015, 11:04 AM

Quote:

Originally Posted by C.W

Any other pics out there?
Blazer 2007 did you seal them right to the inside of the quarter or just what you can see in the pics?

It,s in the mock up stage right now but I think I,m going to make some angle iron strips from 16 G. and weld them to the tubs then bolt them to the quarters and also use some sorta sealer as well.

12-23-2014, 02:05 AM	#1
C.W Registered User Join Date: Jun 2007 Location: Penticton BC Canada Posts: 84	86 Burb need rear wheel tub ideas So I new I had a little rust starting and due to a blown diff with a flip kit I decided to pull the leafs since they were sagged anyway which seemed easier to remove the spare tire well to get the rear shackle bolt out. Anyway turns out the rear inner tubs are BAD! I also found more rust the shop that did the body for the previous owner must have thought wouldnt be seen if they hid it under new outer panels. So my dilemma is to scrap or proceed with my original end plan and bag it. I prefer choice #2 Can you guys that have done step notches and floor/ wheel tub mods needed please post pics and maybe a brief description of what you used as far as parts, etc? Id like to save this truck rather than scrap it. Attached Images __________________ 86 Burb, 5/7 drop, 18" rims, big stereo, work in progress, as well as daily driver. 86 Short box just starting the build. 86 GMC 1500 2wd, ugly blue farm looking truck with a mild 454... More to come! 98 Cheyenne Ext cab short box 2wd. Driver and maybe future project.

12-23-2014, 11:07 AM	#3
blazer2007 Registered User Join Date: Jan 2007 Location: vernon b.c. Posts: 3,022	Re: 86 Burb need rear wheel tub ideas one other pic Attached Images

12-23-2014, 04:00 PM	#4
C.W Registered User Join Date: Jun 2007 Location: Penticton BC Canada Posts: 84	Re: 86 Burb need rear wheel tub ideas Your not that far away from me. What gauge steel are you using? __________________ 86 Burb, 5/7 drop, 18" rims, big stereo, work in progress, as well as daily driver. 86 Short box just starting the build. 86 GMC 1500 2wd, ugly blue farm looking truck with a mild 454... More to come! 98 Cheyenne Ext cab short box 2wd. Driver and maybe future project.

12-24-2014, 11:10 AM	#5
blazer2007 Registered User Join Date: Jan 2007 Location: vernon b.c. Posts: 3,022	Re: 86 Burb need rear wheel tub ideas I used 14 G. for the floor and 16G. for the tubs,.Maybe see you at one of the car shows this year

01-01-2015, 01:12 AM	#6
C.W Registered User Join Date: Jun 2007 Location: Penticton BC Canada Posts: 84	Re: 86 Burb need rear wheel tub ideas Any other pics out there? Blazer 2007 did you seal them right to the inside of the quarter or just what you can see in the pics? __________________ 86 Burb, 5/7 drop, 18" rims, big stereo, work in progress, as well as daily driver. 86 Short box just starting the build. 86 GMC 1500 2wd, ugly blue farm looking truck with a mild 454... More to come! 98 Cheyenne Ext cab short box 2wd. Driver and maybe future project.

12-23-2014, 11:05 AM	#2
blazer2007 Registered User Join Date: Jan 2007 Location: vernon b.c. Posts: 3,022	Re: 86 Burb need rear wheel tub ideas I,m just finishing up my blazer floor,I raised the floor 3 inches and made some wheel tubs. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.