IA blazer body going to scrap heap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

offroden · 02-08-2015, 08:03 PM

Having what's left of a 70 blazer body going to the big scrap yard in the sky. Not much ggod stuff left but there might be something left saving.

briank · 02-08-2015, 08:13 PM

Do you have the plastic insert and screws on the door near the vent window?

twistedchevy · 02-08-2015, 08:14 PM

Does it still have the wiring harness?

offroden · 02-08-2015, 08:36 PM

Which one?

twistedchevy · 02-08-2015, 09:02 PM

Engine and under dash

undertaker72 · 02-08-2015, 09:11 PM

hows the fender emblems and the door handles , do the doors have the tops and end pieces also wing windows, interested in them all

Ridnhi · 02-08-2015, 11:38 PM

I have an auxiliary gas tank in my blazer that I am wanting to take out and I will need to fill in the hole they cut for the fill tube. Would you be willing to cut a patch out of the driver side quarter panel? If you are I will send you a picture of what I need. It would need to be around 6"x6" or so. Thanks Eli

meathead95 · 02-08-2015, 11:51 PM

How's the rear floor? Do you still have the gas tank?

72k/5 · 02-09-2015, 12:04 AM

If they are still available and any good. I would be interested in the windsheild frame(header piece) the latch reinforcement on the doors and the little door catch pieces?

**6t727t2** · 02-09-2015, 06:11 PM

Any chance this cowl piece is rust free, inside and out and lower. Not much to ask for

offroden · 02-09-2015, 10:08 PM

Sorry, It is not rust free.

offroden · 02-09-2015, 10:10 PM

Quote:

Originally Posted by 72k/5

If they are still available and any good. I would be interested in the windsheild frame(header piece) the latch reinforcement on the doors and the little door catch pieces?

Windshield frame is junk. I think I have the door pieces.

offroden · 02-09-2015, 10:11 PM

Quote:

Originally Posted by meathead95

How's the rear floor? Do you still have the gas tank?

Rear floor is junk. Gas tank is a newer aftermarket one.

offroden · 02-09-2015, 10:12 PM

Quote:

Originally Posted by Ridnhi

I have an auxiliary gas tank in my blazer that I am wanting to take out and I will need to fill in the hole they cut for the fill tube. Would you be willing to cut a patch out of the driver side quarter panel? If you are I will send you a picture of what I need. It would need to be around 6"x6" or so. Thanks Eli

I can do the cut.

offroden · 02-09-2015, 10:15 PM

Quote:

Originally Posted by undertaker72

hows the fender emblems and the door handles , do the doors have the tops and end pieces also wing windows, interested in them all

No fender emblems . have the door handles and wing windows

offroden · 02-09-2015, 10:15 PM

Quote:

Originally Posted by twistedchevy

Engine and under dash

I have the engine one.

72k/5 · 02-09-2015, 11:57 PM

Ok cool let me know when you find the door pieces.

briank · 02-10-2015, 11:33 AM

Quote:

Originally Posted by briank

Do you have the plastic insert and screws on the door near the vent window?

Do you have these?

**hooverfish** · 02-10-2015, 05:54 PM

nevermind

**michael bustamante** · 02-10-2015, 06:49 PM

brake booster assy? is it disk or drum fronts? and how much shipped?

offroden · 02-10-2015, 09:59 PM

Quote:

Originally Posted by michael bustamante

brake booster assy? is it disk or drum fronts? and how much shipped?

100. It is disc.

Ridnhi · 02-11-2015, 11:10 PM

Quote:

Originally Posted by offroden

I can do the cut.

Here is what I need. I am measuring from the back edge of the door jamb. I need a piece that starts at 13" back to the 20" mark. From the top of bed rail down I need from 1" down to 7" down. This should give me enough for hole and some extra. Thanks! Eli

Ridnhi · 02-11-2015, 11:11 PM

Other pic

72k/5 · 02-13-2015, 12:28 AM

Have you had a chance to see if you had any of the door pieces I am interested in?

offroden · 02-16-2015, 09:42 PM

Quote:

Originally Posted by 72k/5

If they are still available and any good. I would be interested in the windsheild frame(header piece) the latch reinforcement on the doors and the little door catch pieces?

Are these what you need?

02-08-2015, 08:03 PM	#1
offroden Registered User Join Date: Nov 2014 Location: Logan,ia Posts: 117	blazer body going to scrap heap Having what's left of a 70 blazer body going to the big scrap yard in the sky. Not much ggod stuff left but there might be something left saving. Attached Images

02-08-2015, 08:13 PM	#2
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	Re: blazer body going to scrap heap Do you have the plastic insert and screws on the door near the vent window?

02-08-2015, 08:14 PM	#3
twistedchevy Registered User Join Date: Jan 2015 Location: napa, ca Posts: 249	Re: blazer body going to scrap heap Does it still have the wiring harness? __________________ Mine: 72 c20 Chevy suburban, 02 5.3 w/4l60e , factory ac and 50gal tank. 70 k10 Chevy burb, 04 5.3 w/4l60e np241, with dual 30gal saddle tanks and rear 30 gal tank Dads: 67 c10 step side(project) 72 c10 GMC burb 350/400, with 67 Chevy front clip(grocery getter) Ours: 67 c30 tow truck 70 c10 long bed 383stroker w/digital gauges(work truck)

02-08-2015, 08:36 PM	#4
offroden Registered User Join Date: Nov 2014 Location: Logan,ia Posts: 117	Re: blazer body going to scrap heap Which one?

02-08-2015, 09:02 PM	#5
twistedchevy Registered User Join Date: Jan 2015 Location: napa, ca Posts: 249	Re: blazer body going to scrap heap Engine and under dash __________________ Mine: 72 c20 Chevy suburban, 02 5.3 w/4l60e , factory ac and 50gal tank. 70 k10 Chevy burb, 04 5.3 w/4l60e np241, with dual 30gal saddle tanks and rear 30 gal tank Dads: 67 c10 step side(project) 72 c10 GMC burb 350/400, with 67 Chevy front clip(grocery getter) Ours: 67 c30 tow truck 70 c10 long bed 383stroker w/digital gauges(work truck)

02-08-2015, 09:11 PM	#6
undertaker72 Registered User Join Date: Dec 2013 Location: nephi , utah Posts: 2,307	Re: blazer body going to scrap heap hows the fender emblems and the door handles , do the doors have the tops and end pieces also wing windows, interested in them all

02-08-2015, 11:38 PM	#7
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: blazer body going to scrap heap I have an auxiliary gas tank in my blazer that I am wanting to take out and I will need to fill in the hole they cut for the fill tube. Would you be willing to cut a patch out of the driver side quarter panel? If you are I will send you a picture of what I need. It would need to be around 6"x6" or so. Thanks Eli __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

02-08-2015, 11:51 PM	#8
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: blazer body going to scrap heap How's the rear floor? Do you still have the gas tank? __________________ 72 2wd blazer 72 swb 4x4

02-09-2015, 12:04 AM	#9
72k/5 Registered User Join Date: Jan 2015 Location: Lone oak Texas Posts: 26	Re: blazer body going to scrap heap If they are still available and any good. I would be interested in the windsheild frame(header piece) the latch reinforcement on the doors and the little door catch pieces?

02-09-2015, 06:11 PM	#10
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,694	Re: blazer body going to scrap heap Any chance this cowl piece is rust free, inside and out and lower. Not much to ask for Attached Images

02-09-2015, 10:08 PM	#11
offroden Registered User Join Date: Nov 2014 Location: Logan,ia Posts: 117	Re: blazer body going to scrap heap Sorry, It is not rust free.

02-09-2015, 11:57 PM	#17
72k/5 Registered User Join Date: Jan 2015 Location: Lone oak Texas Posts: 26	Re: blazer body going to scrap heap Ok cool let me know when you find the door pieces.

02-10-2015, 05:54 PM	#19
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,176	Re: blazer body going to scrap heap nevermind Attached Images __________________ Larry 84 Chevy SWB, "Roy", dark blue OG paint, 5.7 LS1, 4L60, Vintage Air, 96k miles. "It's a sorry man who can't find his wife a good job" Last edited by hooverfish; 02-13-2015 at 09:36 AM.

02-10-2015, 06:49 PM	#20
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,913	Re: blazer body going to scrap heap brake booster assy? is it disk or drum fronts? and how much shipped? __________________ 1967custom Last edited by michael bustamante; 02-10-2015 at 07:04 PM.

02-11-2015, 11:11 PM	#23
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: blazer body going to scrap heap Other pic Attached Images __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71



Register or Log In To remove these advertisements.

02-13-2015, 12:28 AM	#24
72k/5 Registered User Join Date: Jan 2015 Location: Lone oak Texas Posts: 26	Re: blazer body going to scrap heap Have you had a chance to see if you had any of the door pieces I am interested in?

Register or Log In To remove these advertisements.