|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-03-2015, 09:07 PM
|
#1 |
|
Registered User
Join Date: Oct 2008
Location: U.P., Michigan
Posts: 66
|
Power Steering Box Nut Too Tight?
I removed the lock nut and round nut from my power steering box to replace a leaky seal and put it back together. When I started the truck the power steering pump was squealing and when I checked the fluid it was all bubbly. Do you think I over tightened that nut with the 2 holes in it?
Posted via Mobile Device |
|
|
|
05-03-2015, 09:12 PM
|
#2 |
|
Registered User
Join Date: Oct 2008
Location: Marianna Arkansas
Posts: 7,279
|
Re: Power Steering Box Nut Too Tight?
Sounds more like air in the pump and lines. Start the truck turn the wheel all the way to lock on one side then shut off the truck. That is how I was told by MR. Goodwrench to bleed the pump. Jim
|
|
|
|
|
05-03-2015, 09:33 PM
|
#3 |
|
Registered User
 
Join Date: Oct 2014
Location: Mount Washington, KY
Posts: 19
|
Re: Power Steering Box Nut Too Tight?
Where did you get your seal at..? I can't seem to find at any part stores around me here.
|
|
|
|
|
05-03-2015, 09:42 PM
|
#4 |
|
Registered User
Join Date: Oct 2008
Location: U.P., Michigan
Posts: 66
|
Carquest I think.
Posted via Mobile Device |
|
|
|
|
05-04-2015, 08:21 AM
|
#5 |
|
Registered User
Join Date: Apr 2012
Location: Ashville
Posts: 6
|
Re: Power Steering Box Nut Too Tight?
You have got to get the air out of the system. Start it up & turn the wheels all the way in both directions. Turn the engine off for around 10 to 15 minutes. The air will work it's way to the top. Fill the reservoir & run it again turning the wheels in both directions. You will notice the squealing gets less & less every time you do it. May take three or four times.
|
|
|
|
|
05-04-2015, 09:15 AM
|
#6 |
|
Registered User
Join Date: Feb 2007
Location: Star Valley, WY
Posts: 2,038
|
Re: Power Steering Box Nut Too Tight?
easier to cycle the steering box if you lift the tires off the ground
__________________
Steve 1971 GMC Longbox. Full Roller Stroker 489 w/ FiTech EFI, Chris Straub Cam/NV4500/205/D60/14B w. Grizzly Locker and 4.11's. 2" Lift on 33's |
|
|
|
|
05-04-2015, 01:39 PM
|
#7 |
|
Registered User
Join Date: Oct 2008
Location: U.P., Michigan
Posts: 66
|
Re: Power Steering Box Nut Too Tight?
I'll try that, thanks.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
