Source for NoSpin parts? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RedRoad · 05-08-2015, 01:15 AM

Looking for a single spring retainer for an early NoSpin (Detroit Locker) for a HO52/72. Looks like someone tried to "repair" a cracked one but not very well.

Any leads appreciated

**TBONE1964** · 05-08-2015, 01:21 AM

Contact board member tll74 or DLTruck1973.

They are actually one in the same and should be able to help you with any part or service you need on a rear end.

Thank you,
Tom

**special-K** · 05-08-2015, 06:43 AM

I believe Eaton still supplies parts. check any differential merchant like Randy's Ring & Pinion. try googling Detroit Locker replacement parts.

RedRoad · 05-11-2015, 05:05 PM

No luck at Randys or Tom so still looking.

**special-K** · 05-12-2015, 05:56 AM

Contact Eaton directly. If they don't sell to public they can give you a dealer contact. Maybe parts stock is depleted, but I read a while back Eaton was where you get parts

http://www.google.com/url?sa=t&rct=j...,d.eXY&cad=rja

I should try myself. I have a No-Spin that I somehow lost one of the springs to. I pulled it because of an issue and I suspect it was a spring or both. That may be what caused your side gear issue...weak spring? Mine acted like a go cart, one side was solid full-time locked. It was worse than bias. It wouldn't back up in gravel if there was any slope to it. I just popped another one in, but would like to get this one together.

RedRoad · 05-12-2015, 01:35 PM

I have emailed Eaton with no response so far.

With a new 14 bolt detroit costing $425 and easily sourcing some 14 bolt axles it may be the better way to go but I REALLY would like to make this work.

Thanks

If you were to consider selling your partial unit let me know

RedRoad · 05-13-2015, 03:08 PM

Finally got a response from Eaton, no luck.

Any partial lockers wanted

**special-K** · 05-13-2015, 09:23 PM

I don't understand how they could have no replacement parts unless they scrapped them. I mean, both HO52s and No-Spins have reputations for being bulletproof even still, after 43 years.

RedRoad · 05-14-2015, 12:12 AM

They said "I am sorry but this style of unit has not been made it a long time and there are no parts available."

Randys also said no parts available. I asked for a quote for a 14 bolt detroit and axles and they replied with $1300 plush shipping!

A detroit and axles are only $800 at Summit with free shipping. I could save some cash shopping around on CL or yard on the axles and save $300.

As much as I want to keep the HO52 under the burb the 14 bolt is looking better all the time

**special-K** · 05-15-2015, 07:42 AM

i hear you. I'm a diehard HO52/No-Spin guy. Seeing this day come I have grabbed rears where I found them. I may be good to go or I may find myself stuck in this situation one day. I guess that's why I'm also hanging tight with a same ratio 14-bolt I had planned to put in my '85 Jimmy when I put the Dana60 in, but just sold it as is

**DeadheadNM** · 05-15-2015, 08:28 AM

If time isn't a big issue post a WTB on the parts board. I know an HO with a NoSPin was advertised in the recent past for sale. I was able to locate the parts I needed for my HO52 with some scrounging and some help from the folks here. Good luck.

**jeffahart** · 05-15-2015, 11:44 AM

I have a locker on my workbench out of an HO52. I'll make you a deal, you can come get it. I see you are in Los Angeles.

RedRoad · 05-15-2015, 02:02 PM

Quote:

Originally Posted by jeffahart

I have a locker on my workbench out of an HO52. I'll make you a deal, you can come get it. I see you are in Los Angeles.

Id appreciate that! Shoot me a PM with what you are asking and Ill see If I can make it happen.

THANKS!!

**jeffahart** · 05-15-2015, 02:29 PM

Quote:

Originally Posted by RedRoad

Id appreciate that! Shoot me a PM with what you are asking and Ill see If I can make it happen.

THANKS!!

Sent you a PM. I got some new wheel cylinders too. It will be Xmas for you!

obijuan · 05-17-2015, 12:01 AM

i have a chewed up ring and retainer in a locker. i need one of those too. anyone got one for sale?

05-08-2015, 01:15 AM	#1
RedRoad Registered User Join Date: Jan 2015 Location: Los Angeles California Posts: 927	Source for NoSpin parts? Looking for a single spring retainer for an early NoSpin (Detroit Locker) for a HO52/72. Looks like someone tried to "repair" a cracked one but not very well. Any leads appreciated Attached Images

05-08-2015, 01:21 AM	#2
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,262	Re: Source for NoSpin parts? Contact board member tll74 or DLTruck1973. They are actually one in the same and should be able to help you with any part or service you need on a rear end. Thank you, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

05-08-2015, 06:43 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Source for NoSpin parts? I believe Eaton still supplies parts. check any differential merchant like Randy's Ring & Pinion. try googling Detroit Locker replacement parts. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-11-2015, 05:05 PM	#4
RedRoad Registered User Join Date: Jan 2015 Location: Los Angeles California Posts: 927	Re: Source for NoSpin parts? No luck at Randys or Tom so still looking.

05-12-2015, 05:56 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Source for NoSpin parts? Contact Eaton directly. If they don't sell to public they can give you a dealer contact. Maybe parts stock is depleted, but I read a while back Eaton was where you get parts http://www.google.com/url?sa=t&rct=j...,d.eXY&cad=rja I should try myself. I have a No-Spin that I somehow lost one of the springs to. I pulled it because of an issue and I suspect it was a spring or both. That may be what caused your side gear issue...weak spring? Mine acted like a go cart, one side was solid full-time locked. It was worse than bias. It wouldn't back up in gravel if there was any slope to it. I just popped another one in, but would like to get this one together. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-12-2015, 01:35 PM	#6
RedRoad Registered User Join Date: Jan 2015 Location: Los Angeles California Posts: 927	Re: Source for NoSpin parts? I have emailed Eaton with no response so far. With a new 14 bolt detroit costing $425 and easily sourcing some 14 bolt axles it may be the better way to go but I REALLY would like to make this work. Thanks If you were to consider selling your partial unit let me know

05-13-2015, 03:08 PM	#7
RedRoad Registered User Join Date: Jan 2015 Location: Los Angeles California Posts: 927	Re: Source for NoSpin parts? Finally got a response from Eaton, no luck. Any partial lockers wanted

05-13-2015, 09:23 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Source for NoSpin parts? I don't understand how they could have no replacement parts unless they scrapped them. I mean, both HO52s and No-Spins have reputations for being bulletproof even still, after 43 years. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-14-2015, 12:12 AM	#9
RedRoad Registered User Join Date: Jan 2015 Location: Los Angeles California Posts: 927	Re: Source for NoSpin parts? They said "I am sorry but this style of unit has not been made it a long time and there are no parts available." Randys also said no parts available. I asked for a quote for a 14 bolt detroit and axles and they replied with $1300 plush shipping! A detroit and axles are only $800 at Summit with free shipping. I could save some cash shopping around on CL or yard on the axles and save $300. As much as I want to keep the HO52 under the burb the 14 bolt is looking better all the time

05-15-2015, 07:42 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Source for NoSpin parts? i hear you. I'm a diehard HO52/No-Spin guy. Seeing this day come I have grabbed rears where I found them. I may be good to go or I may find myself stuck in this situation one day. I guess that's why I'm also hanging tight with a same ratio 14-bolt I had planned to put in my '85 Jimmy when I put the Dana60 in, but just sold it as is __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-15-2015, 08:28 AM	#11
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: Source for NoSpin parts? If time isn't a big issue post a WTB on the parts board. I know an HO with a NoSPin was advertised in the recent past for sale. I was able to locate the parts I needed for my HO52 with some scrounging and some help from the folks here. Good luck. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

05-15-2015, 11:44 AM	#12
jeffahart Senior Member Join Date: May 2012 Location: Scottsdale, AZ Posts: 1,907	Re: Source for NoSpin parts? I have a locker on my workbench out of an HO52. I'll make you a deal, you can come get it. I see you are in Los Angeles. Attached Images __________________ White K20

05-17-2015, 12:01 AM	#15
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: Source for NoSpin parts? i have a chewed up ring and retainer in a locker. i need one of those too. anyone got one for sale?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.