McGaughys 63156 Front Disc Brake Kit work with Belltech spindles?

[lolife99]

They will work fine.
They work with 1.25" rotors.

The "oddball" C10 drop spindle is the Belltech 3200.
This is the 73-87 Light Duty spindle for 1" rotors.
The McGaughy's kit won't work with the 3200 spindle.

Have you priced thise parts locally.
Seems like that kit is just normal 5-lug rotors and D52 calipers, hoses and bearing.
Might be a good price.
But is it good stuff or China made parts?
I don't know.

[GAc10boy]

Originally Posted by lolife99

They will work fine.
They work with 1.25" rotors.

The "oddball" C10 drop spindle is the Belltech 3200.
This is the 73-87 Light Duty spindle for 1" rotors.
The McGaughy's kit won't work with the 3200 spindle.

Have you priced thise parts locally.
Seems like that kit is just normal 5-lug rotors and D52 calipers, hoses and bearing.
Might be a good price.
But is it good stuff or China made parts?
I don't know.

Thanks, Keith. I haven't priced each item separately from a local parts house but plan to. Any recommendations? Not looking for anything super fancy but definitely an upgrade from what i have now, which is rusty and unsafe.

[lolife99]

Originally Posted by GAc10boy

Thanks, Keith. I haven't priced each item separately from a local parts house but plan to. Any recommendations? Not looking for anything super fancy but definitely an upgrade from what i have now, which is rusty and unsafe.

I'm not a fan of drilled or slotted rotors since they rust if they don't have an expensive coating on them.
Anymore I would just use a stock smooth QUALITY rotor, bearings and hoses, with a set of Wilwoods D52 calipers.
They come in red or black.

I also like Wilwoods Aluminum M/C over any other brand.