How about dash/guage bezel/guage pics! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vegas80step · 01-28-2012, 06:39 PM

Still have more work but here it is so far...

I have to re-drill the mounting holes.. and the deck opening is kinda hacked up.. (It was very bad when I started) but the trim piece on the deck covers the ugly...

I had to drimel out the blinker holes.. (kinda of a pain)

it's hard to tell by the pics but I rounded the edges leading to the gauges.

you can kinda see what I started with...

.

JRANGER · 01-28-2012, 07:52 PM

looks pretty good so far...So your planning on just making a face out of FG to go over it? It almost looks like you could paint it as is and still have a nice looking dash...I kinda like the smooth flat look...

vegas80step · 01-28-2012, 08:52 PM

Quote:

Originally Posted by JRANGER

looks pretty good so far...So your planning on just making a face out of FG to go over it? It almost looks like you could paint it as is and still have a nice looking dash...I kinda like the smooth flat look...

no, I'm going to have it painted to match the trim piece I had done for the space between my AC vents

JRANGER · 01-28-2012, 08:53 PM

nice...So you just sanded it down smooth and filled the gaps in between each section? I think I may do this on mine

Rogue_Alphonse · 01-28-2012, 09:10 PM

vegas80step · 01-28-2012, 10:18 PM

Quote:

Originally Posted by JRANGER

nice...So you just sanded it down smooth and filled the gaps in between each section? I think I may do this on mine

yeap, less is more with the bondo.... you sand 80% back off...

I went for the all or nothing approach.. (mostly because my bezel was trash)
If I had a nice bezel to start I might try to get one from a scrap yard. case things didn't go to plan, worse case for me I already had to buy a new one!

dmartin1 · 01-30-2012, 12:44 AM

vegas80step,

wow, i would never have thought of doing it with bondo and smoothing it out.
you sir are clever.
i think i may do this to mine,cheap simple something i can do and i imagine painted up nicely it would look amazing!

vegas80step · 03-09-2012, 12:04 AM

the finished product....

(I didn't paint it, was painted and air brushed by the guys that painted my truck...)

motornut · 03-09-2012, 12:11 AM

wow havn't seen that done before awesome job

Stepper562 · 03-09-2012, 01:41 AM

Wow Baravo...Love the airbrushing if it is airbrushing...bada** cluster brother.

74 stepside · 03-09-2012, 03:00 AM

Vegas that bezel came out BAD-A$$!!

Corts60 · 03-09-2012, 03:08 AM

I tried to start a thread about this idea:

1Bad65GMC · 03-09-2012, 05:48 AM

Corts60 I like that one. Who makes that? I like the extra gauges where the vent would be.
Posted via Mobile Device

I am looking at it closer now. Is it Photoshoped?

dmartin1 · 03-12-2012, 02:20 AM

amazing, that art is really something! id like to do that to mine and have chevrolet in cursive painted on it. *stores another idea*

dmartin1 · 04-18-2012, 01:40 AM

gotta be some more out there!

bigwheel15 · 04-18-2012, 02:33 AM

Quote:

Originally Posted by 1Bad65GMC

Corts60 I like that one. Who makes that? I like the extra gauges where the vent would be.
Posted via Mobile Device

I am looking at it closer now. Is it Photoshoped?

At a closer look im thinking youre right, the hole above the radio where the climate controls looks a little funky.

lurch115 · 04-18-2012, 05:25 AM

here are the only pictures i have of the original one in my '84. dusty, but just like new still.

**PORKY** · 06-16-2012, 08:03 AM

Last night we finally got the Auto Meter gauges installed into the bezel. Should have it up and running in another day or two.

my4by2 · 06-16-2012, 09:12 AM

Here's my gauge assembly. Started life as a '91 Suburban & an early 70's C50 cluster. Used the tach out of the earlier model into the Sub' unit. All of it was totally re-worked by Redline Gauge Works.

All the bulbs were replaced with LED units & all the internals of the gauges are modern & set-up for my LS motor.

The clock is a N.O.S. unit I scored on eBay!

JRANGER · 06-16-2012, 03:33 PM

1st 2 pics:
Havent installed it yet but I custom painted my dash bezel...It was a combo of VHT night shades and touch up paints

Pics 3 on:
Also made a 2nd one (Using krylon plastic paint) that is a little duller that im not sure what im going to do with yet...Its possible i cut it up and use it or might sell it

**pops45** · 06-16-2012, 10:16 PM

Burb woodgrain bezel in a 91 Blazer w/tach added. Crappy cell pics.

dmartin1 · 06-18-2012, 04:47 AM

some nice setups! more pics the better. im sure everyone is always out looking for ideas on there dash setup..

monte0185 · 06-08-2015, 07:14 AM

Quote:

Originally Posted by blazer2007

this by far the best one I,ve ever seen

Does anyone know where one could purchase this dash bezel? I love it and it would work great for what im doing.

73gmc454 · 06-08-2015, 07:43 PM

Quote:

Originally Posted by monte0185

Does anyone know where one could purchase this dash bezel? I love it and it would work great for what im doing.

Thanks , I made the bezel myself out of 1/8" aluminum , I wish I would have made more of them but 1 took me a couple months to build that 1 plus I didn't really think anybody else would like it ! The hardest part was making the bottom half that goes around the column , I must have made 20 trips from the shop to the house to get it to fit just right ,

82_454_shorty · 06-09-2015, 07:18 AM

Here's a couple of pics of mine (truck is still under construction):

01-28-2012, 06:39 PM	#51
vegas80step Registered User Join Date: Jul 2011 Location: Las Vegas, NV Posts: 329	Re: How about dash/guage bezel/guage pics! Still have more work but here it is so far... I have to re-drill the mounting holes.. and the deck opening is kinda hacked up.. (It was very bad when I started) but the trim piece on the deck covers the ugly... I had to drimel out the blinker holes.. (kinda of a pain) it's hard to tell by the pics but I rounded the edges leading to the gauges. you can kinda see what I started with... . __________________ I drive a lowered Chevy, a lifted Ford and I have a 62 VW bug stripped down in the garage. Which "Piss on" sticker do I buy?

01-28-2012, 07:52 PM	#52
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: How about dash/guage bezel/guage pics! looks pretty good so far...So your planning on just making a face out of FG to go over it? It almost looks like you could paint it as is and still have a nice looking dash...I kinda like the smooth flat look... __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper Last edited by JRANGER; 01-28-2012 at 07:59 PM.

01-28-2012, 08:53 PM	#54
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: How about dash/guage bezel/guage pics! nice...So you just sanded it down smooth and filled the gaps in between each section? I think I may do this on mine __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

01-28-2012, 09:10 PM	#55
Rogue_Alphonse Registered User Join Date: Dec 2009 Location: Gap PA Posts: 280	Re: How about dash/guage bezel/guage pics! __________________ 1991 Mustang GT Vert, T-5 w/ Pro 5.0, Trick Flow upper & lower, BBK cold air intake, 3:73, BAMA chip, etc. 1988 K5 Blazer, [coming soon] TBI 400, SM465/NP208, 12 bolt rear, 3:08's, looks like a 1980. 1998 Jeep Grand Cherokee 4.0 fully loaded daily driver! Where there's a will, there's a rig!

01-30-2012, 12:44 AM	#57
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: How about dash/guage bezel/guage pics! vegas80step, wow, i would never have thought of doing it with bondo and smoothing it out. you sir are clever. i think i may do this to mine,cheap simple something i can do and i imagine painted up nicely it would look amazing! __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

03-09-2012, 12:04 AM	#58
vegas80step Registered User Join Date: Jul 2011 Location: Las Vegas, NV Posts: 329	Re: How about dash/guage bezel/guage pics! the finished product.... (I didn't paint it, was painted and air brushed by the guys that painted my truck...) __________________ I drive a lowered Chevy, a lifted Ford and I have a 62 VW bug stripped down in the garage. Which "Piss on" sticker do I buy? Last edited by vegas80step; 03-09-2012 at 12:13 AM.

03-09-2012, 12:11 AM	#59
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: How about dash/guage bezel/guage pics! wow havn't seen that done before awesome job __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

03-09-2012, 01:41 AM	#60
Stepper562 Registered User Join Date: Jun 2011 Location: Downey, ca Posts: 262	Re: How about dash/guage bezel/guage pics! Wow Baravo...Love the airbrushing if it is airbrushing...bada** cluster brother.

03-09-2012, 03:00 AM	#61
74 stepside Registered User Join Date: Oct 2009 Location: SoCal Posts: 815	Re: How about dash/guage bezel/guage pics! Vegas that bezel came out BAD-A$$!!

03-09-2012, 03:08 AM	#62
Corts60 Just here to tinker Join Date: Jun 2008 Location: Holland, MI Posts: 3,731	Re: How about dash/guage bezel/guage pics! I tried to start a thread about this idea: __________________ 78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/showthread.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 73 Chevy C20(Daily)http://67-72chevytrucks.com/vboard/s...d.php?t=852767 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(sold)

03-09-2012, 05:48 AM	#63
1Bad65GMC Registered User Join Date: Oct 2011 Location: Sacramento, Calif Posts: 70	Re: How about dash/guage bezel/guage pics! Corts60 I like that one. Who makes that? I like the extra gauges where the vent would be. Posted via Mobile Device I am looking at it closer now. Is it Photoshoped? __________________ 1998 GMC Suburban 2500 454 4X4 1984 GMC Jimmy - 3/4 ton axles, 5.7TBI 1990 GMC Suburban (Parts Donor) scrapped 1965 Buick Riviera - (Sold) 1999 Mercury Grand Marquis 1965 GMC SBSS (Sold) Last edited by 1Bad65GMC; 03-12-2012 at 04:53 PM. Reason: Miss spelling

03-12-2012, 02:20 AM	#64
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: How about dash/guage bezel/guage pics! amazing, that art is really something! id like to do that to mine and have chevrolet in cursive painted on it. stores another idea __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

04-18-2012, 01:40 AM	#65
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: How about dash/guage bezel/guage pics! gotta be some more out there! __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

04-18-2012, 05:25 AM	#67
lurch115 Registered User Join Date: Oct 2006 Location: iowa Posts: 722	Re: How about dash/guage bezel/guage pics! here are the only pictures i have of the original one in my '84. dusty, but just like new still. Attached Images __________________ "Horsepower is how fast you hit the wall, torque is how far you carry the wall with you." '84 chevy half ton short box 2wd, 67,000 actual miles '03 chevy 1500 HD crew cab 4x4 standard box, 6.0L

06-16-2012, 08:03 AM	#68
PORKY Registered User Join Date: Nov 2010 Location: LITTLETON NH Posts: 106	Re: How about dash/guage bezel/guage pics! Last night we finally got the Auto Meter gauges installed into the bezel. Should have it up and running in another day or two. Attached Images



Register or Log In To remove these advertisements.

06-16-2012, 09:12 AM	#69
my4by2 Registered User Join Date: Dec 2010 Location: Hot Springs, AR. Posts: 1,215	Re: How about dash/guage bezel/guage pics! Here's my gauge assembly. Started life as a '91 Suburban & an early 70's C50 cluster. Used the tach out of the earlier model into the Sub' unit. All of it was totally re-worked by Redline Gauge Works. All the bulbs were replaced with LED units & all the internals of the gauges are modern & set-up for my LS motor. The clock is a N.O.S. unit I scored on eBay! Attached Images __________________ 1977 Chevrolet K30 LWB Crew Cab 497HP Mast Motorsports 6.0L LY6 HO engine GM NV4500 5-speed, Centerforce clutch + NP205 D60 + 14-bolt FF w/ Eaton posi + disc brakes Skyjacker 2.5" full spring lift w/ Nitro shocks Custom paint + interior http://67-72chevytrucks.com/vboard/s...d.php?t=435722

06-16-2012, 03:33 PM	#70
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: How about dash/guage bezel/guage pics! 1st 2 pics: Havent installed it yet but I custom painted my dash bezel...It was a combo of VHT night shades and touch up paints Pics 3 on: Also made a 2nd one (Using krylon plastic paint) that is a little duller that im not sure what im going to do with yet...Its possible i cut it up and use it or might sell it Attached Images __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

06-16-2012, 10:16 PM	#71
pops45 Junior Member Join Date: Jan 2010 Location: Sacramento, ca Posts: 94	Re: How about dash/guage bezel/guage pics! Burb woodgrain bezel in a 91 Blazer w/tach added. Crappy cell pics. Attached Images

06-18-2012, 04:47 AM	#72
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: How about dash/guage bezel/guage pics! some nice setups! more pics the better. im sure everyone is always out looking for ideas on there dash setup.. __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

06-09-2015, 07:18 AM	#75
82_454_shorty Registered User Join Date: May 2010 Location: Arnprior, Ontario Posts: 24	Re: How about dash/guage bezel/guage pics! Here's a couple of pics of mine (truck is still under construction):

Register or Log In To remove these advertisements.