|
06-25-2015, 08:58 PM
|
#1 |
|
Registered User
 
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
|
308 rear end
REAR END IS SOLD PENDING PAYMENT TO MRWELD
I have a rear end 308 ring and pinon and all hardware for sale. asking 125.00 plus shipping. I took it out of the rear end housing
__________________
Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper Last edited by gdavis; 06-27-2015 at 07:48 PM. |
|
|
|
06-25-2015, 09:26 PM
|
#2 |
|
Registered User
Join Date: Dec 2013
Location: Lampasas, Texas
Posts: 234
|
Re: 308 rear end
Just the ring and pinion or is the carrier included?
what rear end is it for? 12 bolt? Do you have pictures |
|
|
|
|
06-26-2015, 09:26 AM
|
#3 | |
|
Registered User
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
|
Re: 308 rear end
Quote:
__________________
Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper |
|
|
|
|
|
06-26-2015, 11:46 AM
|
#4 |
|
Registered User
Join Date: May 2012
Location: Faith,NC
Posts: 1,626
|
Re: 308 rear end
Hey George,
quick question, will this just bolt in or will adjustments/ setup be needed? I.e. backlash adjustments , etc. Thanks, |
|
|
|
|
06-26-2015, 12:52 PM
|
#5 |
|
Senior Member
Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 6,538
|
Re: 308 rear end
Steve, you will need to set up the preload on the side carrier bearings and the pinion bearings. All that is required on the pinion is a new crush sleeve, but the side bearings use shims. If you are not replacing the bearings, you should be able to reuse the shims that were there. I would not advise reusing the crush sleeve though. Oh, and a new pinion nut or some loctite on the existing one.
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
|
|
|
|
06-26-2015, 01:55 PM
|
#6 | |
|
Registered User
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
|
Re: 308 rear end
Quote:
__________________
Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper |
|
|
|
|
|
06-26-2015, 02:03 PM
|
#7 | |
|
Registered User
Join Date: May 2012
Location: Faith,NC
Posts: 1,626
|
Re: 308 rear end
Quote:
|
|
|
|
|
|
06-26-2015, 03:02 PM
|
#8 |
|
Registered User
Join Date: Feb 2013
Location: Ten Mile Tennessee
Posts: 73
|
Re: 308 rear end
I want the gear and carrier, PM sent..
|
|
|
|
|
06-27-2015, 07:46 PM
|
#9 | |
|
Registered User
Join Date: Aug 2012
Location: Homosassa, Fl.
Posts: 2,965
|
Re: 308 rear end
Quote:
__________________
Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper |
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
