How to restore the 4x4 Blue Front Hub lock knobs? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CUSTOM/10** · 07-30-2015, 05:25 PM

I had a few mins today so I messed around with some blue lock-out dials to see what a torch could do to the chalky white faded dials. I cleaned them up, ( with very fine sand paper ) sanded any areas that needed it, then using a hot torch I
very quickly passed the flame back & forth over the dial allowing the flame to touch the plastic only for a fraction of a second at a time, slowly melting the white chalky plastic back to blue ! There not perfect, but much better than before ! What do you think ?

07-30-2015, 05:25 PM	#33
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,915	Re: How to restore the 4x4 Blue Front Hub lock knobs? I had a few mins today so I messed around with some blue lock-out dials to see what a torch could do to the chalky white faded dials. I cleaned them up, ( with very fine sand paper ) sanded any areas that needed it, then using a hot torch I very quickly passed the flame back & forth over the dial allowing the flame to touch the plastic only for a fraction of a second at a time, slowly melting the white chalky plastic back to blue ! There not perfect, but much better than before ! What do you think ? Attached Images __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.