Through side fender exhaust photo please - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

spastik_kat_kustoms · 01-17-2015, 12:37 AM

I'm looking for some headers for the same idea. I can't find any that go to the outside of the frame

moggey01 · 01-17-2015, 02:57 AM

Race car fab guys have them. Rick Jones, Jerry Bickel, etc. You weld mounts to the trim rings and weld mounts to the inside of the bed to bolt to. What you are looking at on that truck is probably hand made.

Paul V · 05-02-2015, 12:59 PM

Sorry to bring this thread back up, but save me doing another thread anyone got any more photos of fender exit exhausts?

I am just about to cut into the side of my 71 C10 and wanted to see if i am making the right choice ?

jim-bob · 05-02-2015, 03:53 PM

..and the guy never got any advice on installing the 700r4 tranny

hdff · 05-03-2015, 10:38 AM

i don't have any pics but if you are askin for opinions i say don't do it... once it's done it's done. if you decide you don't like it is a lot of work to fix it.

eightbanger · 05-03-2015, 05:54 PM

Quote:

Originally Posted by jim-bob

..and the guy never got any advice on installing the 700r4 tranny

davepl · 05-03-2015, 06:27 PM

You're going to build 'em, not buy them. If it were a kit I think we'd have seen more of them. Dare to dream though, it could ne a niche product.

If it were me (and it ain't) I'd suggest using a full over-the axle exhaust system, but use valves to optionally divert it to the side-exits. Best of both worlds, quiet cruise, scare the children next to you at the traffic light...

To keep the fender hole small I might suggest rigid-mounting the exhaust tip to the fender itself (properly insulated) and then use a small section of that flex-braid exhaust pipe (like you see on OEM cars and turbos so often) so there's some give.

That way it'll never rattle on the fender and your exhaust system movement remains (largely) independent from the movements of the body and frame.

As for "Don't do it, Len" he never explained himself on the Flintstones either.

Paul V · 05-04-2015, 06:54 PM

Quote:

Originally Posted by davepl

You're going to build 'em, not buy them. If it were a kit I think we'd have seen more of them. Dare to dream though, it could ne a niche product.

If it were me (and it ain't) I'd suggest using a full over-the axle exhaust system, but use valves to optionally divert it to the side-exits. Best of both worlds, quiet cruise, scare the children next to you at the traffic light...

To keep the fender hole small I might suggest rigid-mounting the exhaust tip to the fender itself (properly insulated) and then use a small section of that flex-braid exhaust pipe (like you see on OEM cars and turbos so often) so there's some give.

That way it'll never rattle on the fender and your exhaust system movement remains (largely) independent from the movements of the body and frame.

As for "Don't do it, Len" he never explained himself on the Flintstones either.

I am making the system from scratch and have placed the muffler boxes under the floor, the plan was to cut out a hole of say 3.5" and fit a trim piece flush with the fender, then run the 2.5" pipe inside this independent.

With 1/2" clearance all around i think it should be ok.

Will report back once i have done one side

**KyleSeal** · 05-05-2015, 10:24 AM

Thinking of doing it to mine too.

Paul V · 05-26-2015, 05:35 PM

Ok so i bit the bullet and started on this, going to turn up a alloy ring to fit between the fender and the pipe to give it a better look.

WarMonger · 05-26-2015, 05:37 PM

Looks good. Did you make that ring?

Paul V · 05-26-2015, 05:41 PM

Quote:

Originally Posted by WarMonger

Looks good. Did you make that ring?

No it's and exhaust pipe tail

WarMonger · 05-26-2015, 06:24 PM

What size and where did you get it? If you don't mind me asking.

Paul V · 05-26-2015, 06:28 PM

Quote:

Originally Posted by WarMonger

What size and where did you get it? If you don't mind me asking.

No problems asking

This was a 3 1/2" one, got it here in the UK from an exhaust parts company.

http://exhaustpartsuk.com/index.php?...roducts_id=838

mud.man.rj · 05-26-2015, 06:34 PM

When Stacey did it to Copperhead he cut a hole threw the frame and welded a tube in 1st then ran the ext pipe threw that so it wouldn't have to be hanging under the frame. He did a really nice job. Have considered it but haven't done it yet. Each to their own, it is what hot rodding it all about.

Twisted78SS · 05-26-2015, 06:46 PM

Tootsie had them, but they were custom made
http://67-72chevytrucks.com/vboard/s...516741&page=88
check post # 2188

magwakeenercew2jh · 05-26-2015, 08:22 PM

I like it.

But if I did it on my truck, I'm afraid that it's look like this (different color...and RAT's just a driver) after a few weeks.

mud.man.rj · 05-26-2015, 10:01 PM

You burning coal there mag or what...

magwakeenercew2jh · 05-26-2015, 10:24 PM

Quote:

Originally Posted by mud.man.rj

You burning coal there mag or what...

Hey, Mud.

Paul V · 10-03-2015, 04:17 PM

Just to bring this to a end

I have now finshed the side exit pipes and here are some photos of how i did it for anyone who wants to have a go.

Cut out on the body

Photos of the trim pipes with the alloy rings fitted used to hide the fixings.

And a video the final results.

01-17-2015, 12:37 AM	#26
spastik_kat_kustoms Registered User Join Date: Nov 2014 Location: Lebanon Tn Posts: 4	Re: Through side fender exhaust photo please I'm looking for some headers for the same idea. I can't find any that go to the outside of the frame

01-17-2015, 02:57 AM	#27
moggey01 Registered User Join Date: Apr 2011 Location: Houston Texas Posts: 315	Re: Through side fender exhaust photo please Race car fab guys have them. Rick Jones, Jerry Bickel, etc. You weld mounts to the trim rings and weld mounts to the inside of the bed to bolt to. What you are looking at on that truck is probably hand made.

05-02-2015, 12:59 PM	#28
Paul V Registered User Join Date: Dec 2012 Location: Shropshire, UK Posts: 61	Re: Through side fender exhaust photo please Sorry to bring this thread back up, but save me doing another thread anyone got any more photos of fender exit exhausts? I am just about to cut into the side of my 71 C10 and wanted to see if i am making the right choice ? __________________ 1971 C10 Short Bed Fleet Side 1990 Ferrari 348TB 2005 Ferrari F430 Too many 2 Stroke Motorcycles To List !

05-02-2015, 03:53 PM	#29
jim-bob Registered User Join Date: Apr 2011 Location: brooks,georgia Posts: 674	Re: Through side fender exhaust photo please ..and the guy never got any advice on installing the 700r4 tranny

05-03-2015, 10:38 AM	#30
hdff Registered User Join Date: Apr 2007 Location: pasadena,TEXAS Posts: 880	Re: Through side fender exhaust photo please i don't have any pics but if you are askin for opinions i say don't do it... once it's done it's done. if you decide you don't like it is a lot of work to fix it. __________________ 1971 Cheyenne SWB 402BB, 700R4, 3.73 posi, PS, PB, A/C, Tilt, Tach "Wanda" Don't argue with idiots, People watching may not be able to tell the difference... There's someone in my head........But it's not me...... cheap tricks thread great info here!! http://67-72chevytrucks.com/vboard/s...d.php?t=489394

05-03-2015, 06:27 PM	#32
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: Through side fender exhaust photo please You're going to build 'em, not buy them. If it were a kit I think we'd have seen more of them. Dare to dream though, it could ne a niche product. If it were me (and it ain't) I'd suggest using a full over-the axle exhaust system, but use valves to optionally divert it to the side-exits. Best of both worlds, quiet cruise, scare the children next to you at the traffic light... To keep the fender hole small I might suggest rigid-mounting the exhaust tip to the fender itself (properly insulated) and then use a small section of that flex-braid exhaust pipe (like you see on OEM cars and turbos so often) so there's some give. That way it'll never rattle on the fender and your exhaust system movement remains (largely) independent from the movements of the body and frame. As for "Don't do it, Len" he never explained himself on the Flintstones either. __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

05-05-2015, 10:24 AM	#34
KyleSeal Senior Member Join Date: Mar 2014 Location: Toano, VA Posts: 893	Re: Through side fender exhaust photo please Thinking of doing it to mine too. Attached Images __________________ "Sometimes I do serve as a good bad example. Glad to be of service." My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809

05-26-2015, 05:35 PM	#35
Paul V Registered User Join Date: Dec 2012 Location: Shropshire, UK Posts: 61	Re: Through side fender exhaust photo please Ok so i bit the bullet and started on this, going to turn up a alloy ring to fit between the fender and the pipe to give it a better look. __________________ 1971 C10 Short Bed Fleet Side 1990 Ferrari 348TB 2005 Ferrari F430 Too many 2 Stroke Motorcycles To List !

05-26-2015, 05:37 PM	#36
WarMonger Registered User Join Date: Jan 2015 Location: Ventura, CA Posts: 818	Re: Through side fender exhaust photo please Looks good. Did you make that ring? __________________ ..................... ____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1970 C20 -_--_--_- ______ _--_--_- /___\|__\____ -_--_-_ \|_(0)\|__\|_(0)] 1972 K5

05-26-2015, 06:24 PM	#38
WarMonger Registered User Join Date: Jan 2015 Location: Ventura, CA Posts: 818	Re: Through side fender exhaust photo please What size and where did you get it? If you don't mind me asking. __________________ ..................... ____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1970 C20 -_--_--_- ______ _--_--_- /___\|__\____ -_--_-_ \|_(0)\|__\|_(0)] 1972 K5

05-26-2015, 06:34 PM	#40
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: Through side fender exhaust photo please When Stacey did it to Copperhead he cut a hole threw the frame and welded a tube in 1st then ran the ext pipe threw that so it wouldn't have to be hanging under the frame. He did a really nice job. Have considered it but haven't done it yet. Each to their own, it is what hot rodding it all about. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

05-26-2015, 06:46 PM	#41
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: Through side fender exhaust photo please Tootsie had them, but they were custom made http://67-72chevytrucks.com/vboard/s...516741&page=88 check post # 2188 __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

05-26-2015, 08:22 PM	#42
magwakeenercew2jh RAT1968 '68 Cab/'71 Parts Join Date: Feb 2002 Location: Coarsegold, CA Posts: 2,375	Re: Through side fender exhaust photo please I like it. But if I did it on my truck, I'm afraid that it's look like this (different color...and RAT's just a driver) after a few weeks. Attached Images __________________ M17 Coarsegold, CA RAT's shiny now. But always a rat.

05-26-2015, 10:01 PM	#43
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: Through side fender exhaust photo please You burning coal there mag or what... __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

10-03-2015, 04:17 PM	#45
Paul V Registered User Join Date: Dec 2012 Location: Shropshire, UK Posts: 61	Re: Through side fender exhaust photo please Just to bring this to a end I have now finshed the side exit pipes and here are some photos of how i did it for anyone who wants to have a go. Cut out on the body Photos of the trim pipes with the alloy rings fitted used to hide the fixings. And a video the final results. __________________ 1971 C10 Short Bed Fleet Side 1990 Ferrari 348TB 2005 Ferrari F430 Too many 2 Stroke Motorcycles To List !



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.