My 67 short stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sperger72 · 10-20-2015, 02:41 PM

New fuel cell, cab peak removed and my LSX

BossHogg69 · 10-20-2015, 04:25 PM

You definitely have a top notch build in the works. It will definitely kick much @$$ with that LSX454 and the blower. I plan to 'debut' my truck at the Goodguys Spring Nats in DFW, and wring it out on the autocross as well. I hope to see you there!

sperger72 · 10-20-2015, 04:57 PM

Hopefully mine is their too. That is my goal Texas spring nationals. You are much farther along than I am.

sperger72 · 10-20-2015, 06:04 PM

Peak removed

pat english · 10-20-2015, 07:37 PM

Quote:

Originally Posted by sperger72

Peak removed

That looks good.

jlsanborn · 10-20-2015, 10:02 PM

Holy smokes! You do some b!tchin' work there man and FAST! Judging by the gear you've got to go in, you are used to fast

I'm sub'd up and will be looking for the burnout video next week. What's with all the heat exchangers in that photo a few pages back?

sperger72 · 10-21-2015, 12:21 PM

Jlsanborn,

The picture with the backspace tool? That was taken in my office. I manufacture those style tube and fin coils.

Not used to fast, only second big build. Trying to get ready for Texas Nationals in March.
Zach

BossHogg69 · 10-22-2015, 01:52 PM

Quote:

Originally Posted by sperger72

Hopefully mine is their too. That is my goal Texas spring nationals. You are much farther along than I am.

Yeah, but you are obviously WAY more talented than I am and work a heck of a lot faster!!

sperger72 · 10-22-2015, 03:53 PM

Finally put the cab back on the chassis. Starting to look like a truck again. Have a long way to go.

sperger72 · 10-22-2015, 03:54 PM

One more picture on the trailer.

sperger72 · 10-22-2015, 03:57 PM

Just getting measurements for LSX motor mounts. Then back off with cab. Tedious work.

Having an issue with Currie Fab 9 and c notch clearance too.

sperger72 · 10-22-2015, 04:21 PM

Adam,

Definitely not any better, we are getting there though. I have some good helpers.

10-20-2015, 02:41 PM	#1
sperger72 Registered User Join Date: May 2015 Location: Whitehouse TX Posts: 132	Re: My 67 short stepside New fuel cell, cab peak removed and my LSX Attached Images

10-20-2015, 04:25 PM	#2
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: My 67 short stepside You definitely have a top notch build in the works. It will definitely kick much @$$ with that LSX454 and the blower. I plan to 'debut' my truck at the Goodguys Spring Nats in DFW, and wring it out on the autocross as well. I hope to see you there! __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

10-20-2015, 04:57 PM	#3
sperger72 Registered User Join Date: May 2015 Location: Whitehouse TX Posts: 132	Re: My 67 short stepside Hopefully mine is their too. That is my goal Texas spring nationals. You are much farther along than I am.

10-20-2015, 06:04 PM	#4
sperger72 Registered User Join Date: May 2015 Location: Whitehouse TX Posts: 132	Re: My 67 short stepside Peak removed Attached Images

10-20-2015, 10:02 PM	#6
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: My 67 short stepside Holy smokes! You do some b!tchin' work there man and FAST! Judging by the gear you've got to go in, you are used to fast I'm sub'd up and will be looking for the burnout video next week. What's with all the heat exchangers in that photo a few pages back? __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

10-21-2015, 12:21 PM	#7
sperger72 Registered User Join Date: May 2015 Location: Whitehouse TX Posts: 132	Re: My 67 short stepside Jlsanborn, The picture with the backspace tool? That was taken in my office. I manufacture those style tube and fin coils. Not used to fast, only second big build. Trying to get ready for Texas Nationals in March. Zach

10-22-2015, 03:53 PM	#9
sperger72 Registered User Join Date: May 2015 Location: Whitehouse TX Posts: 132	Re: My 67 short stepside Finally put the cab back on the chassis. Starting to look like a truck again. Have a long way to go. Attached Images

10-22-2015, 03:54 PM	#10
sperger72 Registered User Join Date: May 2015 Location: Whitehouse TX Posts: 132	Re: My 67 short stepside One more picture on the trailer. Attached Images

10-22-2015, 03:57 PM	#11
sperger72 Registered User Join Date: May 2015 Location: Whitehouse TX Posts: 132	Re: My 67 short stepside Just getting measurements for LSX motor mounts. Then back off with cab. Tedious work. Having an issue with Currie Fab 9 and c notch clearance too.

10-22-2015, 04:21 PM	#12
sperger72 Registered User Join Date: May 2015 Location: Whitehouse TX Posts: 132	Re: My 67 short stepside Adam, Definitely not any better, we are getting there though. I have some good helpers.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.