327 what flywheel and clutch? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scuderia · 11-16-2015, 12:49 PM

Collecting all the parts to swap from my current 292 to a large journal 327. I just read that the flywheel on the 292 is different than the small block V8's. What flywheel and clutch should I be looking for? I'm going to keep the SM465. Also any potential issues with the bell housing I currently have? Thanks

jtrichard · 11-16-2015, 01:18 PM

Bell housing will bolt right on as for the flywheel every thing I read says it will also fit as long as yours is a "292" smaller 6s had smaller bolts and will fit the 327 if you drill them out.... as for the clutch if yours is 11" then it will also be fine

**Chevy Fleetside** · 11-16-2015, 01:49 PM

http://www.summitracing.com/parts/pi...et?prefilter=1

scuderia · 11-16-2015, 02:15 PM

Quote:

Originally Posted by Chevy Fleetside

http://www.summitracing.com/parts/pi...et?prefilter=1

Thanks! and that'll work with the starter I have?

**Chevy Fleetside** · 11-16-2015, 07:27 PM

Quote:

Originally Posted by scuderia

Thanks! and that'll work with the starter I have?

You could count the teeth on the flywheel you have now. If you have 168 then it will work.

11-16-2015, 12:49 PM	#1
scuderia Registered User Join Date: May 2014 Location: SAN FRANCISCO Posts: 447	327 what flywheel and clutch? Collecting all the parts to swap from my current 292 to a large journal 327. I just read that the flywheel on the 292 is different than the small block V8's. What flywheel and clutch should I be looking for? I'm going to keep the SM465. Also any potential issues with the bell housing I currently have? Thanks __________________ '66 C10 SWB '64 C2 roadster '38 Indian Scout Flattracker '70 Triumph T120R '81 Laverda Jota

11-16-2015, 01:18 PM	#2
jtrichard Registered User Join Date: Jun 2013 Location: joshua tree ca. Posts: 1,484	Re: 327 what flywheel and clutch? Bell housing will bolt right on as for the flywheel every thing I read says it will also fit as long as yours is a "292" smaller 6s had smaller bolts and will fit the 327 if you drill them out.... as for the clutch if yours is 11" then it will also be fine

11-16-2015, 01:49 PM	#3
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,779	Re: 327 what flywheel and clutch? http://www.summitracing.com/parts/pi...et?prefilter=1 __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.