TX Parting out a 3/4 ton 1970 GMC super - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

yellowGT · 09-30-2015, 01:23 AM

Interested in steering column if you still have it.

HSRACER · 09-30-2015, 09:57 AM

Quote:

Originally Posted by yellowGT

Interested in steering column if you still have it.

I sold the white one already but I have another if you are interested. I am headed to good guys tomorrow night for this weekend. I sell these for 125.

**FIREBALL** · 10-05-2015, 01:33 AM

Pm sent

**cmabolt** · 10-05-2015, 08:32 AM

Looking for high hump trans cover if you have one. Preferably no holes.

Chris

HSRACER · 10-05-2015, 01:31 PM

Quote:

Originally Posted by cmabolt

Looking for high hump trans cover if you have one. Preferably no holes.

Chris

No high hump at this time. I do have a nice low hump cut out though.

deuceswildpacefl · 10-09-2015, 07:58 AM

i am looking for an inside half of a ac/ heat unit dont need the controls if available

HSRACER · 10-09-2015, 10:13 PM

Quote:

Originally Posted by deuceswildpacefl

i am looking for an inside half of a ac/ heat unit dont need the controls if available

I have all the under dash parts. The heater core is what is actually the inside piece. It also connects to the foot vent and the vent tubes. What exactly are you looking for?

72lady · 10-10-2015, 12:10 AM

I'm looking for a 3 groove crank pulley, 2 groove waterpump pulley and 2 groove ps pulley all off the same truck so I know they will work. They are for a 71 with Ac. Shipped to 29360. Thanks

deuceswildpacefl · 10-10-2015, 09:12 AM

Quote:

Originally Posted by HSRACER

I have all the under dash parts. The heater core is what is actually the inside piece. It also connects to the foot vent and the vent tubes. What exactly are you looking for?

I am trying to reassemble my 71 and have found that the ac/heat unit i have has the wrong inside heat/ac box and duct work. i need the correct inside box and duct work and vaccum lines to the control head thanks

deuceswildpacefl · 10-12-2015, 06:07 PM

wanted to update you on what i need I went to our warehouse and i have located the heat vent, S plenum, A/C diverter, and the reducer so all i need is the actual heater box by its self and the 3 prong vacuum connection for the for the control head
thanks

deuceswildpacefl · 10-13-2015, 04:54 AM

wanted to let you know found a A/C heater box last night locally thank you

HSRACER · 10-13-2015, 08:19 AM

Quote:

Originally Posted by 72lady

I'm looking for a 3 groove crank pulley, 2 groove waterpump pulley and 2 groove ps pulley all off the same truck so I know they will work. They are for a 71 with Ac. Shipped to 29360. Thanks

I just sold those last week. I will be getting another truck in a week or two and will check to see if it has what you are looking for.

HSRACER · 10-13-2015, 08:20 AM

Quote:

Originally Posted by deuceswildpacefl

wanted to let you know found a A/C heater box last night locally thank you

Cool, I guess that should complete what you need then?

KingC72 · 10-26-2015, 12:44 PM

Is the tool box (complete) with door still available?
If so how much for it all?
Thanks

HSRACER · 10-29-2015, 09:23 AM

Quote:

Originally Posted by KingC72

Is the tool box (complete) with door still available?
If so how much for it all?
Thanks

All the tool box parts are sold. Sorry

**dutchmanz** · 12-20-2015, 12:20 AM

It's been a month or so but did you sell the lighter?

Original72 · 12-20-2015, 01:31 AM

Please let me know if you come across any high humps. Thank you

68 CRACKERBOX · 12-20-2015, 12:05 PM

do you still have the a/c ?

rmc70 · 12-21-2015, 02:19 PM

May be interested in the grille and the tailgate if it's in good condition. Could you send pic of tailgate? What price you have on the grille and tailgate?

Thanks'
Randy

09-30-2015, 01:23 AM	#101
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: Parting out a 3/4 ton 1970 GMC super Interested in steering column if you still have it. __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

10-05-2015, 01:33 AM	#103
FIREBALL (007) aka Houdini Join Date: Mar 2010 Location: ROCKMART/ROME GA Posts: 354	Re: Parting out a 3/4 ton 1970 GMC super Pm sent __________________ Live life one day at a time!

10-05-2015, 08:32 AM	#104
cmabolt Registered User Join Date: Nov 2007 Location: baltimore, maryland Posts: 617	Re: Parting out a 3/4 ton 1970 GMC super Looking for high hump trans cover if you have one. Preferably no holes. Chris __________________ Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636 Easier to beg forgiveness than ask permission!

10-09-2015, 07:58 AM	#106
deuceswildpacefl Registered User Join Date: Apr 2014 Location: PACE, Fl Posts: 71	Re: Parting out a 3/4 ton 1970 GMC super i am looking for an inside half of a ac/ heat unit dont need the controls if available __________________ 1971 swb C10 1960 Bonneville convertible 1964 Fairlane, Mark VIII running gear 1964 Fairlane original 1927 Mercedes Gazelle

10-10-2015, 12:10 AM	#108
72lady Registered User Join Date: Aug 2014 Location: SC Posts: 33	Re: Parting out a 3/4 ton 1970 GMC super I'm looking for a 3 groove crank pulley, 2 groove waterpump pulley and 2 groove ps pulley all off the same truck so I know they will work. They are for a 71 with Ac. Shipped to 29360. Thanks

10-12-2015, 06:07 PM	#110
deuceswildpacefl Registered User Join Date: Apr 2014 Location: PACE, Fl Posts: 71	Re: Parting out a 3/4 ton 1970 GMC super wanted to update you on what i need I went to our warehouse and i have located the heat vent, S plenum, A/C diverter, and the reducer so all i need is the actual heater box by its self and the 3 prong vacuum connection for the for the control head thanks __________________ 1971 swb C10 1960 Bonneville convertible 1964 Fairlane, Mark VIII running gear 1964 Fairlane original 1927 Mercedes Gazelle

10-13-2015, 04:54 AM	#111
deuceswildpacefl Registered User Join Date: Apr 2014 Location: PACE, Fl Posts: 71	Re: Parting out a 3/4 ton 1970 GMC super wanted to let you know found a A/C heater box last night locally thank you __________________ 1971 swb C10 1960 Bonneville convertible 1964 Fairlane, Mark VIII running gear 1964 Fairlane original 1927 Mercedes Gazelle

10-26-2015, 12:44 PM	#114
KingC72 Registered User Join Date: Oct 2014 Location: Toronto ON Posts: 16	Re: Parting out a 3/4 ton 1970 GMC super Is the tool box (complete) with door still available? If so how much for it all? Thanks

12-20-2015, 12:20 AM	#116
dutchmanz Knuckle Buster, Instructor Join Date: May 2010 Location: Pantego, NC Posts: 562	Re: Parting out a 3/4 ton 1970 GMC super It's been a month or so but did you sell the lighter? __________________ Current classic fleet: 72 K5 Blazer CST, unrestored factory Orange paint...mostly 69 C10 factory SWB, 454, TH400, Saddle tan, Rust-o-ration 53 Studebaker M35 w/331 Reo gas I-6, Air Force Strata Blue

12-20-2015, 01:31 AM	#117
Original72 Registered User Join Date: Nov 2010 Location: Hou TX Posts: 47	Re: Parting out a 3/4 ton 1970 GMC super Please let me know if you come across any high humps. Thank you

12-20-2015, 12:05 PM	#118
68 CRACKERBOX Registered User Join Date: Jun 2014 Location: MYAKKA CITY fla. Posts: 408	Re: Parting out a 3/4 ton 1970 GMC super do you still have the a/c ? __________________ short bed are just cars without trunk lids trucks have long beds real trucks are longhorn 72 gmc 2500 longhorn 68 chevy c-30 50th anniv. 9ft step side 68 gmc crackerbox 8v71 detroit 72 gmc astro95 8v71 detroit

12-21-2015, 02:19 PM	#119
rmc70 Registered User Join Date: Oct 2015 Location: Decatur, In. Posts: 52	Re: Parting out a 3/4 ton 1970 GMC super May be interested in the grille and the tailgate if it's in good condition. Could you send pic of tailgate? What price you have on the grille and tailgate? Thanks' Randy



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.