|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-21-2015, 07:27 PM
|
#1 |
|
Registered User
Join Date: Apr 2013
Location: Idaho
Posts: 89
|
American Racing VF490 20's Questions
It has been a long time coming. I have gone back and forth between wanting 15's 17's 20's, but I have finally decided to purchase some new wheels for the truck in 20's.
The wheels I am going to pick up are the American Racing VF490 wheels, I love the deep dish on them. But here is where I run into issues.... I have never purchased a set on wheels before in my life. So what I need help with is the following..... Truck has a 2.5/4" drop I want 20x8.5 up front and 20x10 in the rear. So bolt pattern is 5x5 Next question and the one that seems to be most asked is backspacing. I want the rim and tire to set inside the wheel well, I like the way N2TRX rims fit his truck. So what back spacing do I get? Next question I would need a set of tires to go with the wheels any recommendations here? I would still like a thicker tire, no low profile As always the help is appreciated Last edited by Ardee83; 03-21-2015 at 07:29 PM. Reason: Add drop info |
|
|
|
03-21-2015, 09:37 PM
|
#2 |
|
Registered User
Join Date: May 2010
Location: Crossville, TN
Posts: 142
|
Re: American Racing VF490 20's Questions
I've been looking at quite a few wheels myself, and the one thing I've been finding is problems with the size of the center bore of 20's, 18's and many 17's even. I know on my '87, you need a center bore of at least 3.125". Also, if you have the heavy duty brake option, that could complicate it more because of the depth of the hub itself, fitting in the center cap.
Just something to be aware of, especially on custom built wheels... Jerry |
|
|
|
|
03-21-2015, 11:25 PM
|
#3 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,071
|
Re: American Racing VF490 20's Questions
20x8.5 w/5.25"bs & 255/40-20 front.
20x10 w/5"bs rear is centered; 5.5"bss tucks in more but gets closer to the inner tub wall & 295/40-20 rears. Kens truck has 9.5's on the rear.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
03-22-2015, 01:00 AM
|
#4 |
|
Registered User
Join Date: Apr 2013
Location: Idaho
Posts: 89
|
Re: American Racing VF490 20's Questions
I love it! Thank you. Now to find the best price
|
|
|
|
|
01-13-2016, 03:03 PM
|
#5 | |
|
Registered User
 
Join Date: Jul 2014
Location: Sherwood, Oregon
Posts: 974
|
Re: American Racing VF490 20's Questions
Quote:
http://us.hubcentric-rings.com/why_h.../?src=intpopup
__________________
--Project BABA YAGA!... http://67-72chevytrucks.com/vboard/s...d.php?t=655783 --Project BABA YAGA!... http://67-72chevytrucks.com/vboard/s...ghlight=Belair "Life is tough - wear a cup!" "Old Enough to Know Better - Too Young to Resist" "Junk is something you will need three weeks after you throw it away." |
|
|
|
|
|
01-13-2016, 03:20 PM
|
#6 |
|
Cruzzzn' Vet
Join Date: Jan 2005
Location: Porterville,Ca.
Posts: 1,918
|
Re: American Racing VF490 20's Questions
|
|
|
|
|
01-14-2016, 12:32 AM
|
#7 |
|
Registered User
Join Date: Aug 2012
Location: Clovis, NM
Posts: 2,705
|
Re: American Racing VF490 20's Questions
With a 2.5/4 drop they won't be tucking. You know that right?
__________________
2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
