1966 C10 Project Truck - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scoot_mcgrute · 02-16-2016, 10:48 AM

Some pictures from the weekend

Painting up the rally wheels

This showed up while painting so I slapped it in, super easy!

She runs!

New glovebox emblem too

I also ordered these up for the new wheels, should be here in a week and look killer!

scoot_mcgrute · 02-16-2016, 04:57 PM

New tires are mounted up, I think I have to put them on tonight

I'm stoked to get the crummy Nissan wheels off this thing and get some proper wheels on it. Center caps come on Thursday!

scoot_mcgrute · 02-17-2016, 10:56 AM

Tires and wheels are on! I found a bad lower ball joint on the driver's side so I'll be doing those, master cylinder, wheel cylinders, brake hoses and packing the bearings next. It looks so much better with a proper wheel on it

Also noticed this little guy on the driver's side. Didn't see it until last night, I think it's pretty cool!

More to come in the coming weeks

scoot_mcgrute · 02-18-2016, 01:23 AM

Small update but I'm waiting on parts to button up the brakes and front suspension, shold be here next week. I also ordered some new springs for it, I'll be giving it a 2-3 drop. It should look killer and still give a small rake so I can haul some stuff around. It's been a great little project so far!

scoot_mcgrute · 02-18-2016, 01:10 PM

Quick question, where is a good place to source a high hump tunnel for these trucks?

scoot_mcgrute · 02-19-2016, 10:47 AM

Got my center caps yesterday and had to throw one on. Looks awesome!

scoot_mcgrute · 02-19-2016, 04:35 PM

So, going to look at a new motor tomorrow. Mine has been a crap shoot since I bought it, it had no oil in it, and the amount it smokes has me thinking it needs rings. Found a low mile Targetmaster 292 I6 mated to what looks like a T5 transmission (ad just says 5 speed) so more than likely going to be bringing it home! It's going to be awesome!

scoot_mcgrute · 02-19-2016, 09:16 PM

Figured since I'll be doing ball joints, I may as well slap some new springs in it too! 2" front, 3" rear CPP springs. Those paired with my 235s should give it a great look!

scoot_mcgrute · 02-20-2016, 09:35 PM

Picked this up today, the block says 4.8L but the head doesn't look like a 292 head, is it a 250 head?

scoot_mcgrute · 02-20-2016, 09:36 PM

Block stamp

scoot_mcgrute · 02-20-2016, 09:38 PM

No more 3 on the tree, it was fun for a couple laps around the neighborhood but the T5 will make it more fun for me

scoot_mcgrute · 02-21-2016, 01:43 AM

Figured the motor question out...

Paul Y · 02-21-2016, 05:34 PM

Quote:

Originally Posted by scoot_mcgrute

Figured the motor question out...

What did it end up being?

P.

scoot_mcgrute · 02-21-2016, 10:01 PM

It's a 292 block and head. Just had a brain fart and thought the head was taller than a 250 and the blocks were the same. Had it backwards.

scoot_mcgrute · 02-24-2016, 01:49 PM

I couldn't help myself, I had to get some shots of it outside on the new wheels the other day. It's so much better than before! The center caps will look awesome on it too!

**TJ's Chevy** · 02-24-2016, 05:05 PM

That's cool! Truck looks Sweet!

Yeah the 292 has a taller block than the rest. A 194-230-250 head will fit on a 292. Common to put a 194 head on a 292 as the combustion chamber is smaller which means more compression.

scoot_mcgrute · 02-25-2016, 09:55 AM

Quote:

Originally Posted by TJ's Chevy

That's cool! Truck looks Sweet!

Yeah the 292 has a taller block than the rest. A 194-230-250 head will fit on a 292. Common to put a 194 head on a 292 as the combustion chamber is smaller which means more compression.

Thanks! It's been a fun learning experience so far! I'm excited to drop the new motor and trans in it along with the brake parts and new springs. It's going to be an awesome little driver when I'm done with it

**mattfranklin** · 02-26-2016, 12:36 AM

What a great looking truck. Good progress, too.

scoot_mcgrute · 02-29-2016, 04:06 PM

Quote:

Originally Posted by mattfranklin

What a great looking truck. Good progress, too.

Thanks! I didn't get anything done this weekend since I'm fixing my Jeep from breaking an axle shaft last weekend. I did get just about everything I need for the motor and tranny swap though

In my spare time (ha!) I am a board member of the local Wheelin With Warriors group and we had a meeting yesterday. One of the other members loves the pickup and was able to decode the bumper stickers for me. If I heard him right, it was a runway crew ordinance truck in Florida. I'm not sure how it found its way to the NW but it did

Bomp · 02-29-2016, 09:43 PM

Wow, all the way from Florida to these parts. Mighty long haul. Dependability.

scoot_mcgrute · 03-08-2016, 01:15 AM

After the Jeep was finished in the garage, I pulled the 66 back in. I'm getting ready to pull the front clip this weekend and start prepping for the 292 and T-5. While I was spraying down all the bolts with Kroil tonight, I found that the passenger fender was welded to the rocker panel with a piece of a barrel. Who needs bolts????

62stepside longbox · 03-08-2016, 01:46 AM

Looks like the PO was trying to make it a unibody

scoot_mcgrute · 03-08-2016, 04:45 PM

Quote:

Originally Posted by 62stepside longbox

Looks like the PO was trying to make it a unibody

Right? I'm just glad to have rescued the truck from those hands

While I'm doing the motor swap, I need to swap the ball joints out. I had ordered everything for the drum brakes and was going to do a disc conversion this summer with a donor truck. The 6 lug wheels have kinda grown on me and not having a ton of space to part a truck out, I looked at my conversion options. I'll have the CPP stock spindle disc brake kit at my door before too long

scoot_mcgrute · 03-11-2016, 08:11 AM

Started tearing it down last night, the front clip will be off this weekend!

[IMG]

I entered it in a car show in June, here's the list of things that will be done before then:

292
T-5
Hydraulic clutch
Wilwood brake master cylinder
Clean and paint the frame
Front disc brakes
2/3 lowering springs
Scrub the body down with CLR
Bed wood?

I'm hoping to reach my goal far before June but now I have a deadline to work towards

Bomp · 03-11-2016, 11:09 AM

Rootin' for ya.
Have to ask. Whats the cardboard sign on the windshield in the older pics.

02-16-2016, 10:48 AM	#26
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: 1966 C10 Project Truck Some pictures from the weekend Painting up the rally wheels This showed up while painting so I slapped it in, super easy! She runs! New glovebox emblem too I also ordered these up for the new wheels, should be here in a week and look killer! __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778 Last edited by scoot_mcgrute; 02-16-2016 at 10:55 AM.

02-16-2016, 04:57 PM	#27
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: 1966 C10 Project Truck New tires are mounted up, I think I have to put them on tonight I'm stoked to get the crummy Nissan wheels off this thing and get some proper wheels on it. Center caps come on Thursday! __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778

02-17-2016, 10:56 AM	#28
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: 1966 C10 Project Truck Tires and wheels are on! I found a bad lower ball joint on the driver's side so I'll be doing those, master cylinder, wheel cylinders, brake hoses and packing the bearings next. It looks so much better with a proper wheel on it Also noticed this little guy on the driver's side. Didn't see it until last night, I think it's pretty cool! More to come in the coming weeks __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778

02-18-2016, 01:23 AM	#29
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: 1966 C10 Project Truck Small update but I'm waiting on parts to button up the brakes and front suspension, shold be here next week. I also ordered some new springs for it, I'll be giving it a 2-3 drop. It should look killer and still give a small rake so I can haul some stuff around. It's been a great little project so far! __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778

02-18-2016, 01:10 PM	#30
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: 1966 C10 Project Truck Quick question, where is a good place to source a high hump tunnel for these trucks? __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778

02-19-2016, 10:47 AM	#31
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: 1966 C10 Project Truck Got my center caps yesterday and had to throw one on. Looks awesome! __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778

02-19-2016, 04:35 PM	#32
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: 1966 C10 Project Truck So, going to look at a new motor tomorrow. Mine has been a crap shoot since I bought it, it had no oil in it, and the amount it smokes has me thinking it needs rings. Found a low mile Targetmaster 292 I6 mated to what looks like a T5 transmission (ad just says 5 speed) so more than likely going to be bringing it home! It's going to be awesome! __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778

02-19-2016, 09:16 PM	#33
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: 1966 C10 Project Truck Figured since I'll be doing ball joints, I may as well slap some new springs in it too! 2" front, 3" rear CPP springs. Those paired with my 235s should give it a great look! Attached Images __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778

02-20-2016, 09:35 PM	#34
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: 1966 C10 Project Truck Picked this up today, the block says 4.8L but the head doesn't look like a 292 head, is it a 250 head? Attached Images __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778

02-20-2016, 09:36 PM	#35
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: 1966 C10 Project Truck Block stamp Attached Images __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778

02-20-2016, 09:38 PM	#36
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: 1966 C10 Project Truck No more 3 on the tree, it was fun for a couple laps around the neighborhood but the T5 will make it more fun for me Attached Images __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778

02-21-2016, 01:43 AM	#37
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: 1966 C10 Project Truck Figured the motor question out... __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778

02-21-2016, 10:01 PM	#39
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: 1966 C10 Project Truck It's a 292 block and head. Just had a brain fart and thought the head was taller than a 250 and the blocks were the same. Had it backwards. __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778

02-24-2016, 01:49 PM	#40
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: 1966 C10 Project Truck I couldn't help myself, I had to get some shots of it outside on the new wheels the other day. It's so much better than before! The center caps will look awesome on it too! __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778

02-24-2016, 05:05 PM	#41
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,403	Re: 1966 C10 Project Truck That's cool! Truck looks Sweet! Yeah the 292 has a taller block than the rest. A 194-230-250 head will fit on a 292. Common to put a 194 head on a 292 as the combustion chamber is smaller which means more compression. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw



Register or Log In To remove these advertisements.

02-26-2016, 12:36 AM	#43
mattfranklin Senior Member Join Date: Dec 2011 Location: Moraga, CA Posts: 812	Re: 1966 C10 Project Truck What a great looking truck. Good progress, too. __________________ (Very) Slow-Going Build Thread: Stock 1970 Short Step with Stock 1970 LT-1 http://67-72chevytrucks.com/vboard/s...d.php?t=567340

02-29-2016, 09:43 PM	#45
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: 1966 C10 Project Truck Wow, all the way from Florida to these parts. Mighty long haul. Dependability.

03-08-2016, 01:15 AM	#46
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: 1966 C10 Project Truck After the Jeep was finished in the garage, I pulled the 66 back in. I'm getting ready to pull the front clip this weekend and start prepping for the 292 and T-5. While I was spraying down all the bolts with Kroil tonight, I found that the passenger fender was welded to the rocker panel with a piece of a barrel. Who needs bolts???? Attached Images __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778

03-08-2016, 01:46 AM	#47
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: 1966 C10 Project Truck Looks like the PO was trying to make it a unibody __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

03-11-2016, 08:11 AM	#49
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: 1966 C10 Project Truck Started tearing it down last night, the front clip will be off this weekend! [IMG] I entered it in a car show in June, here's the list of things that will be done before then: 292 T-5 Hydraulic clutch Wilwood brake master cylinder Clean and paint the frame Front disc brakes 2/3 lowering springs Scrub the body down with CLR Bed wood? I'm hoping to reach my goal far before June but now I have a deadline to work towards __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778

03-11-2016, 11:09 AM	#50
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: 1966 C10 Project Truck Rootin' for ya. Have to ask. Whats the cardboard sign on the windshield in the older pics.

Register or Log In To remove these advertisements.