Belt/window line trim - The 1947 - Present Chevrolet & GMC Truck Message Board Network

notchbackgta · 02-13-2015, 10:51 AM

I just bought a really nice '69 Burb from member atp last weekend. I will put a build thread once I get off my pickup. It has that trim that mounts just under the window line. I don't really like it all that much and I will probably remove it once I start doing body and paint, which should be soon.

How do I remove it? I am not familiar with the clips

How much would it be worth? Its in really good shape except some numbskull mounted some car mirrors ON THE TRIM, so there are 2 holes in it on each side front door. It is very fixable, but it's just one of those facepalm things.

Any help is appreciated.
Thanks
James

This is the only picture I took so far

**Bgrdmoose** · 02-13-2015, 01:38 PM

The clips are not reproduced so people are always looking for them.
They push in. Remove the interior panels and door panels, reach up underneath the window and squeeze the clip together then you can push it out of the hole.

**LockDoc** · 02-13-2015, 01:41 PM

-
I can't help on the trim because I've never had one that had it but I like your truck....

I did some looking and $75-$100 seems to be the going rate. I don't know about the holes though.

LockDoc

Bigdav160 · 02-13-2015, 05:07 PM

I like the trim. Mine has it. BTW, I paid $35 for a perfect tail hatch piece.

notchbackgta · 02-13-2015, 07:37 PM

I'm just not a fan is all. I would be looking to sell it all. I'll probably wind up sticking it in the basement

GuyO · 02-14-2015, 12:58 AM

Is that an original roof rack? If so could you post more pictures of it?

notchbackgta · 02-14-2015, 12:15 PM

Quote:

Originally Posted by GuyO

Is that an original roof rack? If so could you post more pictures of it?

I think so. I can get more pictures later, I just pulled it in the garage to fix some stuff. I'll get on the garage roof and snap some good ones. That will be for sale too

Number98 · 02-14-2015, 09:54 PM

notchbackgta huh..... you must be a Mustang guy too?

notchbackgta · 02-14-2015, 10:03 PM

Quote:

Originally Posted by Number98

notchbackgta huh..... you must be a Mustang guy too?

Nope, not in the slightest. I LOATHE Mustangs, they are turd boxes and if you name something "Mustang" people will buy it, no matter what it is. And I don't know why people call them "notchbacks" they are nothing of the sort, it's the same thing as the non"notchback".

Read the name again notchbackGTA, Pontiac!

Sorry for the rant.

I am almost ashamed to say I sort of fell in love with the 67 Fastback my cousin had, lol. He got rid of it though because it needed too much work and he didn't want to go into debt fixing it

56HOTRODDER · 02-15-2015, 10:19 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

Also, PM sales are against the board rules.... All parts must be listed in the classifieds.

notchbackgta · 03-10-2016, 09:40 PM

OK, I decided to keep the trim, but I will need to remove it for paint and repair. Does anyone have pictures of how the clip goes into the trim? There are several spots where you CAN'T get behind the panel to remove the clip first, so i'll have to pull on the clip to get it out of its channel without bending anything. I am thinking it is similar to the window trim from an F-body, but I would like to make sure before I start mucking around.

02-13-2015, 10:51 AM	#1
notchbackgta Registered User Join Date: Dec 2011 Location: Earth, NJ Posts: 479	Belt/window line trim I just bought a really nice '69 Burb from member atp last weekend. I will put a build thread once I get off my pickup. It has that trim that mounts just under the window line. I don't really like it all that much and I will probably remove it once I start doing body and paint, which should be soon. How do I remove it? I am not familiar with the clips How much would it be worth? Its in really good shape except some numbskull mounted some car mirrors ON THE TRIM, so there are 2 holes in it on each side front door. It is very fixable, but it's just one of those facepalm things. Any help is appreciated. Thanks James This is the only picture I took so far Last edited by notchbackgta; 02-13-2015 at 11:36 AM.

02-13-2015, 01:38 PM	#2
Bgrdmoose Senior Member Join Date: Aug 2012 Location: College Park, MD Posts: 437	Re: Belt/window line trim The clips are not reproduced so people are always looking for them. They push in. Remove the interior panels and door panels, reach up underneath the window and squeeze the clip together then you can push it out of the hole.

02-13-2015, 01:41 PM	#3
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,770	Re: Belt/window line trim - I can't help on the trim because I've never had one that had it but I like your truck.... I did some looking and $75-$100 seems to be the going rate. I don't know about the holes though. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 02-13-2015 at 01:48 PM.

02-13-2015, 05:07 PM	#4
Bigdav160 Registered User Join Date: Apr 2011 Location: Klein Texas Posts: 3,852	Re: Belt/window line trim I like the trim. Mine has it. BTW, I paid $35 for a perfect tail hatch piece. __________________ My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe

02-13-2015, 07:37 PM	#5
notchbackgta Registered User Join Date: Dec 2011 Location: Earth, NJ Posts: 479	Re: Belt/window line trim I'm just not a fan is all. I would be looking to sell it all. I'll probably wind up sticking it in the basement

02-14-2015, 12:58 AM	#6
GuyO Registered User Join Date: Nov 2011 Location: Kirkland, WA Posts: 343	Re: Belt/window line trim Is that an original roof rack? If so could you post more pictures of it?

02-14-2015, 09:54 PM	#8
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,552	Re: Belt/window line trim notchbackgta huh..... you must be a Mustang guy too?

02-15-2015, 10:19 PM	#10
56HOTRODDER Registered User Join Date: Dec 2012 Location: troy me Posts: 106	Re: Belt/window line trim Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Also, PM sales are against the board rules.... All parts must be listed in the classifieds. Last edited by LockDoc; 02-16-2015 at 01:13 AM. Reason: Indicated WTB by non Premium member

03-10-2016, 09:40 PM	#11
notchbackgta Registered User Join Date: Dec 2011 Location: Earth, NJ Posts: 479	Re: Belt/window line trim OK, I decided to keep the trim, but I will need to remove it for paint and repair. Does anyone have pictures of how the clip goes into the trim? There are several spots where you CAN'T get behind the panel to remove the clip first, so i'll have to pull on the clip to get it out of its channel without bending anything. I am thinking it is similar to the window trim from an F-body, but I would like to make sure before I start mucking around.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.