47-55.1 Danforth Cross Member Install

[dwcsr]

Originally Posted by Coach529

I am still tinkering on my install and have taken a couple short trips around the neighborhood.

One thing I noticed is the steering radius sucks. I see you replaced the inner tie rod ends.

What was the reason for that?

Thanks!!

The inner tie rods that came with the rack were to long. I was seriously concerned when I first drove it around the lot here, our turn radius sucked, it pushed on corners, it jerked on a tight corners like a 4X4 until we got the toe right and aligned and its now as good or better than the stock axle. The customer has about 3000 miles on it with no steering complaints after we went to the 3 turn rack.