No Way This Is Stock

[WannaBe68]

I just replaced the window inner felt strip and outer rubber "seal"(?) strip. Since getting this ride I always thought the gap was huge, because of the original worn-out felt and outer rubber. With the new inner and outer installed the gap between the glass and the outer rubber seal is still huge!
Is there anything else that I can do to seal the window??

[notchbackgta]

Before and after I changed mine, it was a pretty big gap too. I think the design is just bad

[Hart_Rod]

The doors have a tendency to separate due to pulling on the door handle (poor design), try squeezing it back together.

[WannaBe68]

Originally Posted by Hart_Rod

The doors have a tendency to separate due to pulling on the door handle (poor design), try squeezing it back together.

So simple it just might work - I'll give it a go...thanks!

[WannaBe68]

Originally Posted by Hart_Rod

The doors have a tendency to separate due to pulling on the door handle (poor design), try squeezing it back together.

I spent an evening the other day "squeezing" the inner and outer doors together and the gap has almost completely closed! Now when the window is rolled up the outer rubber seal actually seals against the window. I'm assuming this will happen again down the road, but what an easy fix.
Thanks again for the push in the right direction!