![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Apr 2017
Location: Bozeman
Posts: 219
|
Re: Where does a guy start?
Thanks! Iam just wondering if it isn't worth swapping a 100 here and there to afford other items to end up with a truly tunable system? Example , the nvx amp saves 100, add active Passover, same price. Within the same product lines I can still shave a little to add more flexibility? You know how it goes...as soon as you buy a cam, you need springs then you need rockers then your valve covers don't fit and shi@ your carbs to small might as well step up to fuel injection ! Iam not to bummed about money, I like spending money. I've blown this budget awhile back. I just don't know these products well enough to make good decisions lol. My local shop wanted 4500 for custom enclosure and unknown electronics so if I can come in at half that with a bad as@ set up iam good.
So to make things less confusing I'll stick with my list and start trying to understanding how they work lol! Iam bad about going full tilt!! All I need for a pretty good system with my list is an extra channel so far and if I want to go nutty- a dsp and active crossover and..? Ok buddy your not my mom so I can't expect you to hold my hand forever so I'll hit the books and finger this out a bit on my lonesome. Just out of curiosity...what does a guy have in his car to win contests? Individual amps per speaker? All active 3 way speakers? Dsp and bass boost...just everything you can buy lol!!! Ok enough babble! It's only Tuesday and iam allr3ady 2 days behind! |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Apr 2017
Location: Bozeman
Posts: 219
|
Re: Where does a guy start?
oh shi@ its wednesday!
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2014
Location: ID
Posts: 663
|
Re: Where does a guy start?
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Apr 2017
Location: Bozeman
Posts: 219
|
Re: Where does a guy start?
Hey Thanks! Yeah I finally understand that a little better lol. I had to read and download the hu to even kinda get it lol! There are some guys that complain about some features but I won't lie and say I really get it. Just for fun and education...
Line out put- voltage, why is this important? So guys say this limits hu/dsp? Like I hear it's only 2.5 volts and I need blah blah blah or it's 5.4 and my blah goes bad. Guys say that the outputs in pairs are limiting? So it has front back and sub and big boys want 6,8,or 10 individual out puts in there dsp Why? Rabbit hole lol! So hu sends signal to dsp. dsp sends to amps. Amps to drivers. So that's where iam at now lol! Embarrassing! The only thing that sucks about the rabbits hole is it seems like there are so many ways to do it! Basically decided to just add a mono for sub and see if I can learn to tune the hu and go from there. Thanks for all the help. I'll post the amps later and see what ya think. |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2017
Location: Bozeman
Posts: 219
|
Re: Where does a guy start?
Sorry I had to run off and wanted to see a few more things just for my head.
So is the end all be all for big boys to be able to increase/decrease and or manipulate each and every set of frequencies just so they can assign them to the proper driver and or be able to modify them? I get time alignment and the how's and WhYs make since but the latter iam a bit confused over. How deep is the hole? Are these silly boys with 50k in there cars still limited to what snoop dogs engineer was using at the time of the recording lol? What's your realistic interpretations of the gear you want to run? |
![]() |
![]() |
![]() |
#6 | |
Registered User
Join Date: May 2014
Location: ID
Posts: 663
|
Re: Where does a guy start?
Quote:
and spend 3-6 months reading and participating in this forum before you buy anything. There is no rush to buy anything now. Maybe, a head unit if you're going to cut the dash. Everything else can be installed after body / paint. |
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Apr 2017
Location: Bozeman
Posts: 219
|
Re: Where does a guy start?
Now I just want to know why more than how lol! But of course you are right! I do not want to buy an osicilscop ever to be honest. Ya ha it's like my twin turbo project to much for my puny little brain. Ok so iam just going to shi# can all this over the top stuff. Unless there's a really good reason not to use Rockford fosgate I think I'll use the ones you recommended and call it good. Maybe when iam ready I'll ask for set up advice too! I've been reading a lot on diyma but it is hard reading ! Not to many noobs around there. Their classified have some good stuff but for now I'll do new just to be safe. I'll buy my helix there in a couple years lol! Thanks my friend you've been a good sport and I appreciate all your time! I'll check back in when iam installing!
|
![]() |
![]() |
![]() |
#8 |
Registered User
![]() Join Date: Oct 2015
Location: Woodbridge Va
Posts: 401
|
Re: Where does a guy start?
Just read through this entire thread and thank you guys for the input. I'm in the same boat, only my ride is much larger. I want my kids to be able to enjoy the music while sitting in the back, but I don't want to break the bank either.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|